What's new
By:
  • Visit Rebornbuddy
  • Visit Panda Profiles
  • Visit LLamamMagic
  • Visit Resources
  • Visit Downloads
  • Visit Portal
RebornBuddy Forums

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

ShamWOW for HB2 - An Enhance/Elemental/Resto + PVP/RaF Healbot by Bobby53

Status
Not open for further replies.
surfer999 said:
Bobby, thank you for fast reaction! And excuse me for terrible English. Really I think your ShamWOW is the best CC from Glider times to the present. From time to time I think it smarter then myself. :)

I can see this issue right now at each BG if any Frost Mage with Water Elemental pet fights near my Shaman, friend or foe. Bind Elemental spell cast failed repeatedly (indicating Invalid Target) because this Water Elemental is Mage's summoned pet which can't be binded by spell.

Can you look at log attached to my first message? Timestamps here:

... cut for space ...
Click to expand...
surfer999, Unless a change was made in WOW today, you can Bind Elemental the Mage's summoned pet. In fact, its the only use for Bind Elemental in PVP that I am aware of. I appreciate the additional log info, but as I mentioned in my prior reply after exhaustively scanning your supplied log I can see that the Bind Elemental cast is failing. The log indicates it has sufficient mana, is in range, in line of sight, and successfully completed the cast. However it is failing. I cannot see your screen and the info alone is not enough to discern why this particular cast is failing. Since I have two copies of log info from you on this issue no more is needed. If you could just describe where the Water Elemental is relative to your Shaman and the potential reason for the cast failing it would be extremely helpful. Otherwise I'll wait for another user to report and see what can be determined from their submission. Thanks for the follow up, Bobby53
 
Last edited:
Just checked at EotS. Shaman multiple casts Bind on friendly Water Elemental and get red messages 'Invalid Target'. Maybe Bind works successfull only on the foe?
 
Since the release of the new HB for the US Patch, ShamWoW will run to the groups using SilpeFollow plug in, but it stays mounted and doesnt even target the injured. I have to physically get into combat myself before the bot will take over. The log shows no errors

I think this bot is amazing, and may even play my shammy better then I do. Hope its a simple fix.

Incase there'ss a chance its a plug in, only ones I've added are SimpleFollow, FlagReturn, and TrinketRacial. (been running with SimpleFollow. Other 2 are both new)
 
Weird

Hello, First of all i have to say this CC is superb for PVP healing and grinding and is much appreciated , but i believe i've found a very serious bug that's just driving me crazy

i notice the logs say the issue is with the fishing bot, however before u jump to that conclusion i should say when i use the default CC that comes with HB, it works flawlessly and if i use any other char, or char CC again flawless, only when i use shamwow, (which is frustrating as my shamans my main) i get this issue i've edited every option i can think of in shamwow but...no no avail

i'll also be posting this withing the topic of AutoAngler2 and yes both have been updated properly via the latest SVN
 

Attachments

surfer999 said:
Just checked at EotS. Shaman multiple casts Bind on friendly Water Elemental and get red messages 'Invalid Target'. Maybe Bind works successfull only on the foe?
Click to expand...
surfer999, Thank you for the follow up. Yes, being a friendly water elemental is absolutely the issue. Didn't see it mentioned it was targeting friendlies earlier. Fix available shortly. Thanks, Bobby53
 
DJKid said:
Since the release of the new HB for the US Patch, ShamWoW will run to the groups using SilpeFollow plug in, but it stays mounted and doesnt even target the injured. I have to physically get into combat myself before the bot will take over. The log shows no errors

I think this bot is amazing, and may even play my shammy better then I do. Hope its a simple fix.

Incase there'ss a chance its a plug in, only ones I've added are SimpleFollow, FlagReturn, and TrinketRacial. (been running with SimpleFollow. Other 2 are both new)
Click to expand...
DJKid, There were some changes with both mounting and how to react to injured players when HonorBuddy requests mounting, etc. Please see the ShamWOW Frequently Asked Questions [CLICK HERE] for any issue or question about behavior you would like me to look into. Follow the steps in the first item on "1. How to post a question, issue, or constructive criticism..." Thanks and good luck with your Shaman, Bobby53
 
Last edited:
Tessius said:
Hello, First of all i have to say this CC is superb for PVP healing and grinding and is much appreciated , but i believe i've found a very serious bug that's just driving me crazy

i notice the logs say the issue is with the fishing bot, however before u jump to that conclusion i should say when i use the default CC that comes with HB, it works flawlessly and if i use any other char, or char CC again flawless, only when i use shamwow, (which is frustrating as my shamans my main) i get this issue i've edited every option i can think of in shamwow but...no no avail

i'll also be posting this withing the topic of AutoAngler2 and yes both have been updated properly via the latest SVN
Click to expand...
Tessius, Thanks for the post. The issue does needs to initially be looked into in AutoAngler since that is the source of the exception in the log file attached. The problem you are seeing is causing a loop so while I cannot see your screen, I'm assuming the character is standing still doing nothing. Let me know the results of your AutoAngler post. Thanks and good luck, Bobby53
 
Last edited:
*NEW* ShamWOW 4.5.02 available for download!

Quick bug and diagnostic version.

1. Bind Elemental now correctly attempted during BG's only on hostile water elementals.

2. For anyone experiencing issues fighting arena teams of the same faction (Ally vs Ally OR Horde vs Horde) I need your help obtaining some additional info. If you enter arena and determine that you are facing a team from the same faction, please click the Class Config button to bring up ShamWOW options, click the General tab, then in the lower right corner of the window click the Log Mobs button. If you are doing Arena you may want to familiarize yourself with its location before beginning. After the match is over please attach the complete log to a post in the ShamWOW thread so I can review what properties need to be used in that situation.
 
HonorBuddy Mode: Lazyraider
Shamans Location: ogri
What should have happened (be specific):Imbue each weapon once then check in 30 minutes.
What did happen (be specific): Constantly imbued weapons after changing config options but not before.
Computer time of problem (local time, not realm time):9:20am

​
 

Attachments

bobby53 said:
Quick bug and diagnostic version.

1. Bind Elemental now correctly attempted during BG's only on hostile water elementals.

2. For anyone experiencing issues fighting arena teams of the same faction (Ally vs Ally OR Horde vs Horde) I need your help obtaining some additional info. If you enter arena and determine that you are facing a team from the same faction, please click the Class Config button to bring up ShamWOW options, click the General tab, then in the lower right corner of the window click the Log Mobs button. If you are doing Arena you may want to familiarize yourself with its location before beginning. After the match is over please attach the complete log to a post in the ShamWOW thread so I can review what properties need to be used in that situation.
Click to expand...



Hi Bobby


I'll do some more work on trying to see what's going on in arena's with same faction. At the moment i've been running the shammy as resto so work around the issue.


One question I had was in regard to kiting / movement when under melee attack in both arenas and general pvp. Is it possible to get shamwow to attempt to move away from melee when under attack and do a bit of kiting - I can imagine its not a simple thing to do but was wondering about the possibilities
 
sp3sh said:
HonorBuddy Mode: Lazyraider
Shamans Location: ogri
What should have happened (be specific):Imbue each weapon once then check in 30 minutes.
What did happen (be specific): Constantly imbued weapons after changing config options but not before.
Computer time of problem (local time, not realm time):9:20am
​
Click to expand...
sp3sh, Thank for the detailed post and complete log file. I am not able to reproduce the results you are obtaining. From the log file attached, it appears that when asking HonorBuddy what imbue is on the main hand weapon it responds with none, so ShamWOW reacts to the data it is given and casts Windfury Weapon. It then checks with HB again to be sure that Windfury was applied and again is told no imbue is present, so it casts again. The cycle continues to repeat which is what you are seeing. So a couple suggestions:

1. Please shutdown and restart your system. For whatever reason, unusual behaviors regarding persistent buffs ( or the inability to detect them ) can occur which does get cleaned up by restarting.

2. Exit HonorBuddy, clear the weapon imbues manually by right clicking, then re-launch HonorBuddy. Hopefully this will clear up the aura containers and interaction with HonorBuddy.

Thanks and let me know how it works out,
Bobby53
 
Tessius said:
Hello, First of all i have to say this CC is superb for PVP healing and grinding and is much appreciated , but i believe i've found a very serious bug that's just driving me crazy

i notice the logs say the issue is with the fishing bot, however before u jump to that conclusion i should say when i use the default CC that comes with HB, it works flawlessly and if i use any other char, or char CC again flawless, only when i use shamwow, (which is frustrating as my shamans my main) i get this issue i've edited every option i can think of in shamwow but...no no avail

i'll also be posting this withing the topic of AutoAngler2 and yes both have been updated properly via the latest SVN
Click to expand...



This issue has been addressed it was indeed an issue with Autoangler2

highvoltz said:
Should be fixed on the SVN.

This also should now be fixed on svn
Click to expand...


thanks for the assitance
 
HB8654A32 said:
Hi Bobby, I'll do some more work on trying to see what's going on in arena's with same faction. At the moment i've been running the shammy as resto so work around the issue. One question I had was in regard to kiting / movement when under melee attack in both arenas and general pvp. Is it possible to get shamwow to attempt to move away from melee when under attack and do a bit of kiting - I can imagine its not a simple thing to do but was wondering about the possibilities
Click to expand...
HB8654A32, It doesn't matter what spec you are. Just if you notice you are fighting a same faction arena team follow the steps to hit the button. I should be able to resolve with a log submitted containing that data. As for kiting, yes. Already have something in the works but it will be a little while. I had just started it and have some time off coming up where I won't be on the forums much other than to answer questions or take a quick look at an issue. It also won't help anyone doing arena with CC movement disabled so LazyRaider, etc. Thanks, Bobby53
 
Last edited:
bobby53 said:
DJKid, There were some changes with both mounting and how to react to injured players when HonorBuddy requests mounting, etc. Please see the ShamWOW Frequently Asked Questions [CLICK HERE] for any issue or question about behavior you would like me to look into. Follow the steps in the first item on "1. How to post a question, issue, or constructive criticism..." Thanks and good luck with your Shaman, Bobby53
Click to expand...

Thanx, I think the problem is actually with the new HB release. Its happening on all my CC's with both the default and wOOts BG profiles in both BGBot[Beta] and PvP modes. I didnt include the log cause it didnt show any errors, just wouldnt enter combat unless attacked like 3-4 times 1st.

Sorry to post this issue to you before looking into it further. Only error in the log didnt pop up untill after entered in combat, which doesnt happen often even tho its a BG. Not sure if this is from the CC or SimpleFollow tho.
Code: 
[3:05:56 PM:287] %   CastHeal:  moving to heal target who is 43.6263198852539 yds away
[3:05:56 PM:287] %   using fleeing target range of 0.0
[3:05:56 PM:381] %   MoveToHealTarget: stopping now that Heal Target is 43.8413772583008 yds away
[3:05:56 PM:381] %   CastHeal:  not within healing range, Heal Target Hunter.E703 is 43.8 yds away
 
Status
Not open for further replies.
Back
Top