RebornBuddy Forums
Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
HB ARCHIVES: Feedback for Honorbuddy Improvements--DO NOT DELETE!
- Thread starter chinajade
- Start date
Chesnut817
Member
- Joined
- Nov 7, 2012
- Messages
- 573
Can you change it so that the bot does not try to mount while in water please.
LowKey
New Member
- Joined
- Mar 9, 2012
- Messages
- 634
Archaeology bot is pretty awesome, or at least was back when I used. Fishing bot is great. What we need now is a botbase for pet battling. Something that isn't as tricky to configure and set up as the current jumble of plugins and unrelated botbases.
sometimes the toon tries to land on a spot near a tree or high reaching rocks. It then flutters back and forth, trying to avoid the obstacle. I was mining and a player came while the bot was still struggling, and snatched the ore right from under my nose.
I think that, in this case, it would more effective if the toon landed a little bit farther away, and then ran to the location.
I think that, in this case, it would more effective if the toon landed a little bit farther away, and then ran to the location.
Ideas for BGbuddy:
Let people able to make their own profiles for it. Would be great if it was possible to make profiles that could get information from honorbuddy(not sure if its possible) about current happenings in the battleground. E.g Check if an area is under your controll(if X is controlled by your team > defend it in Arathi Basin). If x tower in AV is getting captured go defend. If the small bosses in AV is killed move on etc. And profiles that could alternate between routes: E.g: "4 ways to move from start to middle of the map, 4 new ways from there to the graveyards and then agian 4 diffrent routes to the end boss. " That would make 64 possible routes. So you dont run the same route over and over.
Not sure if this is possible but would be great, might reduce some workload of you when it works since the community can make profiles.
Let people able to make their own profiles for it. Would be great if it was possible to make profiles that could get information from honorbuddy(not sure if its possible) about current happenings in the battleground. E.g Check if an area is under your controll(if X is controlled by your team > defend it in Arathi Basin). If x tower in AV is getting captured go defend. If the small bosses in AV is killed move on etc. And profiles that could alternate between routes: E.g: "4 ways to move from start to middle of the map, 4 new ways from there to the graveyards and then agian 4 diffrent routes to the end boss. " That would make 64 possible routes. So you dont run the same route over and over.
Not sure if this is possible but would be great, might reduce some workload of you when it works since the community can make profiles.
Please can you add Blink to the Mage Singular routine so that it travels a lot faster... this is more a bot request than routine since it's used simply as a way to get somewhere quicker as most legit players who use mage also use Blink to increase their speed when travelling.
DaSoul
Well-Known Member
- Joined
- Jan 15, 2010
- Messages
- 2,827
I came back to honorbuddy/wow botting after almost 1 year and already see problems/bugs that have been arround for years and still not any improvement at all.
I really don't understand, why there is still no routine that checks certain behaviour like
- movement
- interacting with mobs
- interacting with npc
Problems that have been reported million times and still no improvement at all:
Quest pick up/ turn in
Nothing is more frustrating than seeing the bot trying to pickup / turn in a quest, allthough there is nothing to pickup / turn in. Why isn't there a routine that checks, if the pick up / turn in, was successful? Set a timer for pick up / turn in, if the timer fails, continue with other quests. But no, the bot stands in front of a npc clicking it million times. This problem is as old as the QuestBot botbase itself. Problem exists for years.
Move to close arround corners/objects
Same issues here, this has been stated soooo damn often and still no improvement. Bot runs against walls/doors while running in/out of an inn, just because he runs too close arround corners. This is obviously related to too hard set meshing. Problem exists for years.
General stuck in endless loop of action
No matter if while doing quests, stuck while moving, stuck while interacting ... the bot does it in an endless loop. Why isn't there a 100% always running routine, that checks, whether the previous executed command/action has been successfully done?
Right now it looks like:
*running to position b*
*waiting till position b is reached*
if he gets stuck while reaching point b, he will wait in an endless loop.
Why can't it be like
*running to position b with coords x y z, starting from current coords x y z*
*subroutine that checks whether coords till position xyz have changed*
- yes, continue till coords at position b have been reached (subroutine still checks current position against target position until target position is reached)
- no, check current position, generate alternative path, start unstuck, whatever
If we would have such permanent if/loop/while conditions arround everything the bot does, we wouldn't have any endless loop behaviour at all.
Right now, as all the time before the quest bot is completely useless as it gets stuck forever, repeats the same mount/dismount action forever without any routine covering this enormous high risk of getting reported and banned.
Seriously i want to understand it, why are there no improvements? This is no super duper nice to have feature, this is the most basic security feature any automated software should have to be able to provide proceeding functionality.
I really don't understand, why there is still no routine that checks certain behaviour like
- movement
- interacting with mobs
- interacting with npc
Problems that have been reported million times and still no improvement at all:
Quest pick up/ turn in
Nothing is more frustrating than seeing the bot trying to pickup / turn in a quest, allthough there is nothing to pickup / turn in. Why isn't there a routine that checks, if the pick up / turn in, was successful? Set a timer for pick up / turn in, if the timer fails, continue with other quests. But no, the bot stands in front of a npc clicking it million times. This problem is as old as the QuestBot botbase itself. Problem exists for years.
Move to close arround corners/objects
Same issues here, this has been stated soooo damn often and still no improvement. Bot runs against walls/doors while running in/out of an inn, just because he runs too close arround corners. This is obviously related to too hard set meshing. Problem exists for years.
General stuck in endless loop of action
No matter if while doing quests, stuck while moving, stuck while interacting ... the bot does it in an endless loop. Why isn't there a 100% always running routine, that checks, whether the previous executed command/action has been successfully done?
Right now it looks like:
*running to position b*
*waiting till position b is reached*
if he gets stuck while reaching point b, he will wait in an endless loop.
Why can't it be like
*running to position b with coords x y z, starting from current coords x y z*
*subroutine that checks whether coords till position xyz have changed*
- yes, continue till coords at position b have been reached (subroutine still checks current position against target position until target position is reached)
- no, check current position, generate alternative path, start unstuck, whatever
If we would have such permanent if/loop/while conditions arround everything the bot does, we wouldn't have any endless loop behaviour at all.
Right now, as all the time before the quest bot is completely useless as it gets stuck forever, repeats the same mount/dismount action forever without any routine covering this enormous high risk of getting reported and banned.
Seriously i want to understand it, why are there no improvements? This is no super duper nice to have feature, this is the most basic security feature any automated software should have to be able to provide proceeding functionality.
Don't know if its been mentioned in this thread but thought maybe when HB is getting updated or worked on or what ever it may be down for, instead of some crashing message or not attaching, you could make it pop a status up or link to the status page to stop all of the redundant threads? Give you devs more time to chill out and less copy and pasting the same thing in 50 threads an hour 
Slite62
Member
- Joined
- Oct 16, 2013
- Messages
- 494
HB has not been updated after the 4.5.1 patch yet. It's working and beeing tested internaly though, expect a release today. Just in time for euro servers to come back up hopefully!
Chesnut817
Member
- Joined
- Nov 7, 2012
- Messages
- 573
Can you stop HB form attacking tagged mobs, leveling a new warrior and he is attacking anything even mobs that have been tagged getting a few /w telling me they don't need my help blah blah and reported for harassment not sure how that works. But anyway if there a way you can fix this please.
Hi guys,
I don't know if any of you know the addon "zygor" but for the people who don't know it, it's an optimized questing addon. And I was wondering if the quest bot could follow the ways and quests proposed by zygor. I mean if you could kind of synchronize them. It would make the bot to level up really faster and reduce the waste of time due to some weird behaviors like killing mobs to get an item that starts a quest.
I don't know if it's possible, I am just proposing.
I don't know if any of you know the addon "zygor" but for the people who don't know it, it's an optimized questing addon. And I was wondering if the quest bot could follow the ways and quests proposed by zygor. I mean if you could kind of synchronize them. It would make the bot to level up really faster and reduce the waste of time due to some weird behaviors like killing mobs to get an item that starts a quest.
I don't know if it's possible, I am just proposing.
already possible to the some of the weird things such as using a item that starts a quest etc, it's called GrindTo condition with HasItem.
AtomX
New Member
- Joined
- Jan 31, 2010
- Messages
- 319
Please remove all non-official or unsupported bot bases from shipping with HB, DB is shit right now and until it is supported officially will most likely continue to be so. This is dangerous for your user base and misleading since the purchase page says it supports all bot types when in fact it does not.
Also talk to your mods for being heavy handed thread locking Nazis this has nothing to do with the bot but more with the forums where no one can voice their opinion without getting their thread locked just because it's an issue a mod does not agree with.
Also talk to your mods for being heavy handed thread locking Nazis this has nothing to do with the bot but more with the forums where no one can voice their opinion without getting their thread locked just because it's an issue a mod does not agree with.