What's new
By:
  • Visit Rebornbuddy
  • Visit Panda Profiles
  • Visit LLamamMagic
  • Visit Resources
  • Visit Downloads
  • Visit Portal
RebornBuddy Forums

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

ShamWOW for HB2 - An Enhance/Elemental/Resto + PVP/RaF Healbot by Bobby53

Status
Not open for further replies.
Samlock said:
The only thing I noticed was before I deleted and reinstalled HB, the pull distance was set to 20. Is this possibly conflicting with some setting in the CC?
Click to expand...
Possibly. You typically don't want to reduce this value, so it has been a long time since I have tested with a value less than 30. The default 30 and larger values work great, but will have a look at it a little later.

Samlock said:
I'll attach my log anyway if you're interested.
Click to expand...
No logs for proper operation needed, but thank you for offering.

Samlock said:
Other thing (probably working fine, shows my lack of knowledge of shamans) he doesn't seem to use Earth Shock much, if at all. Is this proper behaviour for the CC?
Click to expand...
At lower levels ( < 10 ) and for Elemental Shaman the Earth Shock spell is used as an instant attack as part of pulls. Lightning Bolt is spammed until the target is within Earth Shock range but hasn't reached melee range. If the mob reaches melee range quickly (they were close to begin with), then no Earth Shock is cast.
 
bobby53 said:
No logs for proper operation needed, but thank you for offering.
Click to expand...

Updated the post a fair bit, he's doing the same thing again.. No rush at all but if you get a chance to take a look that'd be great :)

Would a video of the issue help at all?

.:EDIT:.

Opened up the CC and, for now, commented out anything to do with recall. So far, running OK. I know it's a dirty fix, but it at least gets me running :)
 
Last edited:
Samlock said:
Updated the post a fair bit, he's doing the same thing again.. No rush at all but if you get a chance to take a look that'd be great :) Would a video of the issue help at all?
.:EDIT:. Opened up the CC and, for now, commented out anything to do with recall. So far, running OK. I know it's a dirty fix, but it at least gets me running :)
Click to expand...
Sam,

No video is needed even though there is something unique occurring here. It's an unusual problem because this version of the CC has been in use unmodified since July. It's also peculiar because it works one session for you and then doesn't another. The two symptoms identified in the log file which are resulting in the behavior you see are (A) while attempting to cast Lightning Bolt the WoW Client / HB is reporting the spell is on cooldown [this is why Lightning Bolt isn't being cast], and (B) no hostiles / profile mobs are found within 49.5 yards of your position when checking [this is why your totem is being destroyed]. I haven't been able to duplicate, but will continue to look into it.

As for the CC, please feel free to hack it up as you see fit just please do not post it on the forums or share with others as nobody else as of this post is experiencing those issues. I won't be much help in providing assistance with a modified version, but I have enough info from your post to proceed on your original issue at this point anyway.

Let me know if I can be of further assistance,
Bobby53
 
I've been wondering now for a few hours, that why doesnt my shaman put auto attack on in PvP ( WSG ). This CC is veery nice, if i click my enemy of course. Are there any solutions, please? Thanks.
 
Nexxy said:
I've been wondering now for a few hours, that why doesnt my shaman put auto attack on in PvP ( WSG ). This CC is veery nice, if i click my enemy of course. Are there any solutions, please? Thanks.
Click to expand...
Nexxy, my apologies for the unexpected behavior. As always though, I need a debug log file to look into the problem for you. Please see the FAQ which is the second post in this thread for details.
 
Also would love a "healing only" option for PVP just like in the Instance section. Sometimes the bot will still using lightning bolt even when someone needs a heal (or himself)

Also for instancing, the bot should rez dead targets. Instancebuddy is about to release and this will be a must then.

Amazing CC bobby, just a few things and it will be flawless.
 
Last edited:
lukeyboy89 said:
Could you possibly add the PVP Follow logic for the WSG weekend? I've attached something to save you some time.
Click to expand...
Was already working supporting follow in a different fashion. Will delay some elements of what I was working on to a subsequent release in an attempt to get follow finished for release some point this weekend, but release contains some fixes still needing test so not sure if I will make it in time for CTA this pass. Had a window of time to work on it now but Auth server down for a bit so may need to come back to it later tonight.

lukeyboy89 said:
Also would love a "healing only" option for PVP just like in the Instance section. Sometimes the bot will still using lightning bolt even when someone needs a heal (or himself)
Click to expand...
I had omitted Healing Only in PVP since in theory you are better off in some situations attacking. Without seeing a log, the times I have seen the situation you described was due to being damaged just after the determination was made no heal was needed, or heal targets are out of range and a hostile is within range. It's not a big change so will look at adding for you this release. Resto Shaman will support Healing Only, and any other setting will be treated as Healing Over Combat. Other specs will support all variations of PVP behavior.

lukeyboy89 said:
Also for instancing, the bot should rez dead targets. Instancebuddy is about to release and this will be a must then.
Click to expand...
Good point. In fact that extends to world RaF as well. It won't make this release, but I'll add to the top of the list for the following one.

lukeyboy89 said:
Amazing CC bobby, just a few things and it will be flawless.
Click to expand...
Thanks for the feedback Lukeyboy89. Glad it's of use to you.
 
Last edited:
This is the enhancement log. It's quite long though, sorry... I hope the attack bug can be found in this though.
Right, I cant for some reason attach the log. I'll try later. sorry
 
Last edited:
Nexxy said:
This is the enhancement log. It's quite long though, sorry... I hope the attack bug can be found in this though.
Right, I cant for some reason attach the log. I'll try later. sorry
Click to expand...
If it's too big, make a zip file from it (the forums don't accept .rar files, but do accept .zip).
Makes it alot smaller so faster to upload.
 
Remember.... if you have an issue using ShamWOW please attach a log file.

A change has been made to HonorBuddy 1.9.6.0 creating an incompatability with ShamWOW. I am aware of the issue and have left a message for the devs regarding it and posted in the HonorBuddy release thread.

The behavior is that it will not attack anything. Additionally there is an unexplained message now appearing in the log: "Could not find a routine fitting for your class. Please make sure you have a proper combat class routine in your folder, and restart Honorbuddy." This message occurs using the bundled default ShamWOW v4.1.3 or the current forum versions 4.1.5

I have tested with PVP and a Grind profile. I will post an update as soon as I receive a response on this issue. My apologies for the inconvenience. I wasn't expecting this either.
 
Last edited:
harddrive69 said:
We need a new version that's compatible with 1960...415 and default dont work.
Click to expand...

Like i told those in chat earlier.. nesox posted a fix for it on the 1.9.6.0 thread for this CC.


bobby: not sure what the problem was, but it simply woudln't do anything, just run the points. i asked about it briefly in the release thread for the latest HB and nesox has posted a fast fix that fixed whatever the problem was. I'd recommend getting with him about what was updated. I'm sure it was a very simple fix.
 
jawn said:
Like i told those in chat earlier.. nesox posted a fix for it on the 1.9.6.0 thread for this CC. bobby: not sure what the problem was, but it simply woudln't do anything, just run the points. i asked about it briefly in the release thread for the latest HB and nesox has posted a fast fix that fixed whatever the problem was. I'd recommend getting with him about what was updated. I'm sure it was a very simple fix.
Click to expand...
Thank you for pointing it out. Wish it was communicated more directly to me so an updated version was both bundled and available for download so you guys didn't have to encounter an issue at all. I'll post an update tomorrow. For now if you need to bot your Shaman please use the update posted by Nesox [linked to here]
 
Last edited:
LiquidAtoR said:
In anticipation of Bobby making his release, here's a updated version for the 4.15 release.
I've talked to Bobby, but didn't receive a reply yet if he was Ok with me making this ajustment and put it up here for grabs.

Replace the Shaman.cs with this version in the 4.15 package (or in your install folder if you already use the 4.15 CC).
You will need Bobby's original ShamWoW 4.15 CC from page 1 in order for this to work.
This is NOT a separate CC, just 1 replacement file for inside the whole package.

Regards, Lucky.

ps, sorry for not waiting for your Ok on this Bobby, but it's meant to be helpful for your CC users :)
As soon as you have a release ready, I remove this attachment.
Click to expand...

OMFG I love you ! +rep and then +rep for Bobby when he will release his version :)
 
Ok soo This CC is amazing. But when im in PVP it doesnt melee attack toons, yet it melee attacks mobs outside of BG's can you fix or explain how to fix this please? TNX
 
Status
Not open for further replies.
Back
Top