What's new
By:
  • Visit Rebornbuddy
  • Visit Panda Profiles
  • Visit LLamamMagic
  • Visit Resources
  • Visit Downloads
  • Visit Portal
RebornBuddy Forums

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

HB ARCHIVES: Navigation/mesh errors and problems - POST THEM HERE!--DO NOT DELETE!

[Edited by Staff]: This one should be fixed.

My bot got stuck in Azuna. Did not remember to take a screenshot, but there is a big tree at the location that seemed to confuse the bot.

Code: 
[22:15:15.200 D] [Flightor] Set up for movement from <324.7685, 6005.898, 37.4198> to <360.4031, 6049.357, 35.76482>
[22:15:15.200 D] [Flightor] Failed ground nav with status PathGenerationFailed
[22:15:15.200 D] [Flightor] We can neither fly nor run to the destination.
[22:15:16.299 D] [Flightor] Set up for movement from <324.7685, 6005.898, 37.4198> to <360.4031, 6049.357, 35.76482>
[22:15:16.299 D] [Flightor] Failed ground nav with status PathGenerationFailed
[22:15:16.299 D] [Flightor] We can neither fly nor run to the destination.
[22:15:16.750 N] Path distances request failed on map: Troll Raid, Location: <324.7685, 6005.898, 37.4198>
 

Attachments

Last edited by a moderator:
[Edited by Staff]: This should be fixed.

Frostfire cannot genrate path out of Gargra's cave. X="5635.528" Y="3314.396" Z="156.0689"
Bot idle there doing nothing at all...
 
Last edited by a moderator:
[Edited by Staff]: This should be fixed.

ksmaze said:
Frostfire cannot genrate path out of Gargra's cave. X="5635.528" Y="3314.396" Z="156.0689"
Bot idle there doing nothing at all...
Click to expand...
This also happened for Pandaria's shrine of two moons and shrine of seven stars. It idles there failing to find any navigation path.
 
Last edited by a moderator:
[Edited by Staff] Fixed



Low lvl quest, works great with HB2 but not with HB3. Quest: "The Howling Oak", the final Worgen quest. Have to travel to Darnassus from Ruth. Village. After entering the Portal the character is lost.

View attachment 11024 2016-09-06 14.19.txt
 
Last edited by a moderator:
[Edited by Staff]: Please attach the information requested in the first post of this thread.

Constantly getting stuck in the Maelstrom. Too many to report, just everywhere. It literally just sits there.
 
Last edited by a moderator:
[Edited by Staff]: Please attach the information requested in the first post of this thread. The log attached is a partial log.

Bot going nuts with questing profile after new HB update , before bot was working perfect , it s like hot spots are messed . . .
View attachment HB LOG.txt
 
Last edited by a moderator:
https://puu.sh/r42uh/5ffdc2fe60.jpg
Mists of Pandaria: Opening the Gate to Vale of Eternal Blossoms
Mists of Pandaria: Opening the Gate to Vale of Eternal Blossoms (Part I) - YouTube
<MoveTo Nav="Fly" X="3642.793" Y="2544.547" Z="769.912" />
When bots try to fly to this spot from Shrines they stuck running to this gate.

In most cases they run through feet right to the gate. After i maximise wow window they use fly mount and fly to destination(not allways).

SOmetimes restart needed. Sometimes i have to use fly mount and fly higher so they can continue...

What's going on?!
 
ok... Here we go... im out of quest, dont know where and how... I am lvl 108 human priest. Here is what the bot is doing... NON STOP, i toke some quest and it wont do them...

In "StormHeim" is it going from right side at the sea all the way to top of "The Broken Shore" temple... And from there is it trying to swim to "Easter Kingdom" It dies but is s going to the sea again and die from the fatigue again and again and again non stop... So i had the idea about it will go to Easter KingdoM" so i used my HertsStone and started the bot again... It flyes to Hillsbrad Foothills and the to the little island there and fly in circle non stop.... Erm, yeah, wth, do i suppose to do?

View attachment 4924 2016-09-10 21.26.txt
View attachment 13180 2016-09-11 02.20.txt
View attachment 7296 2016-09-11 22.04.txt
View attachment 13976 2016-09-10 05.04.txt
View attachment 7484 2016-09-11 21.11.txt
View attachment 12732 2016-09-11 14.07.txt
 
Last edited:
[Edited by Staff]: This should be fixed now.

A lot of the bridges in highmountain arent meshed right, they fall off a lot of the time. Sometimes they can recover, other times it doesnt know where it is and sits until logmeout logs them out. It is the only issue that I cannot be 100% afk on my gathering profile.

First bridge in video: <Hotspot X="4696.394" Y="3842.302" Z="813.4965" />

Second: <Hotspot X="4614.308" Y="3798.066" Z="813.5912" />

Video:botting mesh error - YouTube

Log: View attachment 21200 2016-09-11 16.11.txt

It does this for most of the bridges in highmountain, this one is the most consistent that i can replicate, and others the bot can figure out a way around after it falls. This one it cannot.
 
Last edited by a moderator:
Last edited by a moderator:
[Edited by Staff]: Added these.

Serpent Shrine Cavern (Map Name: CoilfangRaid, Map Id: 548) is missing two jumplinks for the elevators. Below I have copied their data from my profile. That should make it easy to implement.

PHP: 
<CustomBehavior File="UseTransport" MovementBy="ClickToMoveOnly"
                TransportId="183407"
                WaitAtX="23.56241" WaitAtY="3.254022" WaitAtZ="821.7282"
                TransportStartX="50.0234" TransportStartY="-7.662681E-05" TransportStartZ="820.2599"
                TransportEndX="50.0234" TransportEndY="-7.662681E-05" TransportEndZ="-71.9986"
                StandOnX="48.85162" StandOnY="-11.97232" StandOnZ="821.7272"
                GetOffX="45.5353" GetOffY="-27.05055" GetOffZ="-70.535" />
                
<CustomBehavior File="UseTransport" MovementBy="ClickToMoveOnly"
    TransportId="183490"
    WaitAtX="-70.32576" WaitAtY="-94.40934" WaitAtZ="-51.55218"
    TransportStartX="-59.13499" TransportStartY="-98.79662" TransportStartZ="-52.93419"
    TransportEndX="-59.13502" TransportEndY="-98.79659" TransportEndZ="7.207958"
    StandOnX="-62.71434" StandOnY="-102.1869" StandOnZ="-51.55218"
    GetOffX="-66.49471" GetOffY="-109.6684" GetOffZ="8.627895" />
 
Last edited by a moderator:
[Edited by Staff]: Can you please report this in the Dungeonbuddy thread with a full log?
[Edited by Staff2]: Because location that it's stuck at is off-mesh this needs to be handled by the Bot/Profile/Dungeon script. The dungeon buddy script for this dungeon is no longer being supported because it's max level old content.

I think theyre may be a problem in the everbloom when he gets knocked behind one of the huts.

Path distances request failed on map: ShaperDungeon, Location: <650.2702, 1395.819, 93.65554>
Path distances request failed on map: ShaperDungeon, Location: <650.2702, 1395.819, 93.65554>
[09:49] Casted Death and Decay (188290) on [Tank] Lvl 110 Horde DeathKnight HP: 100 Distance: 0 yards
Path distances request failed on map: ShaperDungeon, Location: <650.2702, 1395.819, 93.65554>
Latency to Buddy service: 26 ms
Path distances request failed on map: ShaperDungeon, Location: <650.2702, 1395.819, 93.65554>
Latency to Buddy service: 63 ms
Path distances request failed on map: ShaperDungeon, Location: <650.2702, 1395.819, 93.65554>
Latency to Buddy service: 67 ms
Path distances request failed on map: ShaperDungeon, Location: <650.2702, 1395.819, 93.65554>
Latency to Buddy service: 35 ms
Path distances request failed on map: ShaperDungeon, Location: <650.2702, 1395.819, 93.65554>
 
Last edited by a moderator:
[Edited by Staff] Fixed



Questing
Northrend - Dragonblight

<Hotspot X="4113.042" Y="2146.447" Z="157.2412" />

Trying to move trough wall
 

Attachments

Last edited by a moderator:
[Edited by Staff] Bot is off mesh. Profile needs to try prevent this from happening






Questing
Northrend - Dragonblight
<Hotspot X="3366.123" Y="2557.789" Z="13.55416" />
 

Attachments

Last edited by a moderator:
[Edited by Staff]: This should be added now.

BlackwingDescent - MapId: 669 - ZoneId: 5094 - SubZoneId: 0

There is an elevator in Blackwing Descent that is not a jumplink yet. Please add it. And thanks for adding the SSC elevators earlier.

Here is the relevant data:

PHP: 
<CustomBehavior File="UseTransport" 
    TransportId="203716"
    WaitAtX="-253.0579" WaitAtY="-224.2609" WaitAtZ="190.0973"
    TransportStartX="-241.349" TransportStartY="-224.6053" TransportStartZ="186.5513"
    StandOnX="-231.804" StandOnY="-224.68" StandOnZ="189.7176"
    TransportEndX="-241.349" TransportEndY="-224.6053" TransportEndZ="73.88091" 
    GetOffX="-225.8139" GetOffY="-224.3478" GetOffZ="76.64645"
/>
 
Last edited by a moderator:
You must log in or register to reply here.
Back
Top