What's new
By:
  • Visit Rebornbuddy
  • Visit Panda Profiles
  • Visit LLamamMagic
  • Visit Resources
  • Visit Downloads
  • Visit Portal
RebornBuddy Forums

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

HB ARCHIVES: Navigation/mesh errors and problems - POST THEM HERE!--DO NOT DELETE!

[Edited by Highvoltz on Sept. 9 2015] Fixed
West of the Ruins of Kra'nak, Tanaan Jungle

There is a pit at Hotspot X="4630.415" Y="-0.7024316" Z="92.37428" with a spiral path downwards.
The first section goes down only a short distance before we need to jump downward to continue. The first section, however, is not meshed. A jump link down can be added to connect to the path below, however you can not return up the same path. Once onto the lower section (after the jump link) then the path is fully meshed and the bot can move on as intended.

CORRECTION: The path is traversable in both directions. No jump link needed.
 
Last edited by a moderator:
[Edited by Highvoltz on Sept. 9 2015] This has already been fixed

Warsong Gulch battleground.

Fences have been added around both of the graveyards (horde/alliance), and the bot's points on the mesh where it's allowed to jump down off the mini-cliff are partially blocked by the new fence, causing the bot to wall run and get stuck.

*Edit* Sorry, this may have already been fixed?
 
Last edited by a moderator:
Garrison mine unlock

[Edited by Highvoltz on Sept. 9 2015] Not a mesh issue but a profile one. I forward issue to the appropriate developer to look at it.

While unlocking the mine in lvl3 alliance garrison my char accepts the quest but then runs right behind the building of my garden and stands there.
moving my char manually into the mine, until it says "area: mine blabla", results in garrison hearthstone usage -.-

View attachment 440 2015-08-23 01.43.txt

position behind the garden building: <Hotspot X="1854.998" Y="126.2618" Z="78.37937" />

after finishing the quest manually everything works fine (if this is any help at all)
 
Last edited by a moderator:
[Edited by Highvoltz on Sept. 9 2015] Fixed



tanaan lvl 90 ally start
<Hotspot X="4072.641" Y="459.7487" Z="138.1024" />

can't path under this object
 
Last edited by a moderator:
[Edited by Highvoltz on Sept. 9 2015] Fixed



At the Iron Docks in Gorgrond , while dead, the bot prefers to walk over water all the way around the docks (like a 1000 yards) instead of walking 200 yards to the corpse.
<Hotspot X="9175.711" Y="791.8961" Z="1.052415" />

9e137bc7c76f0da6532ff8e18cafb268.jpg
 
Last edited by a moderator:
[Edited by Highvoltz on Sept. 9 2015] Doesn't provide enough information. Was the bot running against the bone? If so, please attach a screenshot and log.


[GarrisonBoss]: Mesh Navigator Error: Me not moving, and MoveResult : <Moved> Me at <1414.001, -492.3531, 8.514871>, Destination : <1419.295, -490.8455, 7.784349>

Shadowmoon Valley, southeast of Garrison (on a big piece of bone).
 
Last edited by a moderator:
[Edited by Highvoltz on Sept. 9 2015] Fixed
ffr - stonefury cliffs - can't get onto this area <Hotspot X="7547.662" Y="4584.762" Z="162.2879" /> from <Hotspot X="7547.662" Y="4584.762" Z="162.2879" />
 
Last edited by a moderator:
[Edited by Highvoltz on Sept. 9 2015] This looks like a botbase issue. Please report in the GarrisonBoss thread.
View attachment 8152 2015-09-09 07.59.txt

Code: 
[13:19:27.906 V] Trying jump
[13:19:29.018 N] [GarrisonBoss]: Arrived to <War Mill Entrance> at <1893.407, 238.3187, 76.63971>@2.14. Me at <1892.532, 240.2674, 76.63985>
[13:19:29.179 N] [GarrisonBoss]: Moving to <Dwarven Bunker Work Order>[239066] at <1900.45, 244.1859, 76.60085>, Me at <1892.532, 240.2674, 76.63985>
[13:19:29.658 N] [GarrisonBoss]: Arrived to <Dwarven Bunker Work Order> at <1900.45, 244.1859, 76.60085>@3.64. Me at <1897.484, 242.081, 76.63965>
[13:19:29.786 N] [GarrisonBoss]: Interacting with <Dwarven Bunker Work Order> 
[13:19:29.786 D] Interacting with Dwarven Bunker Work Order (GameObject Id: 239066)
[13:19:30.592 N] [GarrisonBoss]: [239066] Collected Cache from <War Mill>
[13:19:30.722 N] [GarrisonBoss]: [ Dwarven Bunker ] Shipments Update [available: 3, ready: 0, in work: 16 ]
[13:19:30.814 N] [GarrisonBoss]: Moving to <Dalana Clarke>[89065] at <1933.351, 221.2663, 79.87244>, Me at <1897.484, 242.081, 76.63965>
[13:19:31.937 V] We are stuck! (TPS: 14.69716, FPS: 29, Map: SMVAllianceGarrisonLevel2, loc: <1897.499, 240.4265, 76.63965>)!
[13:19:31.949 D] Nearest game object, distance 4.78 yards
<!--Dwarven Bunker Work Order relative to building World\wmo\Draenor\Human\6HU_Garrison_Armory_v2.wmo-->
<GameObject model="World\Expansion05\Doodads\Human\Doodads\6HU_GARRISON_CRATE_EMPTY.m2">
  <Matrix M11="1" M12="-5.551115E-17" M13="0" M14="0" M21="5.551115E-17" M22="1" M23="0" M24="0" M31="0" M32="0" M33="1" M34="0" M41="22.5050468" M42="-7.87652445" M43="-0.0387115479" M44="1" />
</GameObject>
<!--Dwarven Bunker Work Order in Shadowmoon Valley zone and on SMVAllianceGarrisonLevel2 continent-->
<GameObject model="World\Expansion05\Doodads\Human\Doodads\6HU_GARRISON_CRATE_EMPTY.m2">
  <Matrix M11="-0.9335786" M12="0.358372658" M13="0" M14="0" M21="-0.358372658" M22="-0.9335786" M23="0" M24="0" M31="0" M32="0" M33="1" M34="0" M41="1900.44971" M42="244.185913" M43="76.60085" M44="1" />
</GameObject>

[13:19:39.683 N] [GarrisonBoss]: Mesh Navigator Error: Me not moving, and MoveResult : <Moved> Me at <1905.011, 230.7737, 78.50998>, Destination : <1917.76, 221.4568, 76.9698>
[13:19:39.683 N] [GarrisonBoss]: Please report in Mesh Thread: https://www.thebuddyforum.com/honorbuddy-forum/10827-navigation-mesh-errors-post.html
[13:19:39.685 Q] Bot stopping! Reason: None Given
[13:19:40.551 N] [GarrisonBoss]: EventsManager Detached
[13:19:40.641 D] Activity: Honorbuddy Stopped
[13:19:40.658 D] [Sharp Messenger] HB stopped.
 
Last edited by a moderator:
[Edit on Oct 15 2015 by Highvoltz] No issues found at this location. Need end points to do further testing


Frostfire Ridge, Stonefury Cliffs

<Hotspot X="7457.326" Y="4801.229" Z="175.6183" />


The bot zig-zags in this area moving back and forth while navigating through it. After lopping for a while/getting in combat it corrects itself and goes on its way.
 
Last edited by a moderator:
[Edit on Oct 15 2015 by Highvoltz] Known issue. An internal ticket has been opened regarding this
having trouble with navigation from mine to garrison from garrison to mine. For lvl 2 garrison horde. Tested via questing with created hotspots from developer console --> generate hotspots. One inside mine, second outside mine.

Me ZoneId : 7004: Frostwall
Me SubZoneText: Bire's Fort
Me SubZoneId: 7210

active Maps:
1116: Draenor
1330: FWHordeGarrisonLeve2new

Code: 
Could not generate path from {5499.127, 4468.212, 140.247} to {5458.775, 4400.846, 130.0398} on map Draenor (Phase: FWHordeGarrisonLeve2new) (time used: 0 milliseconds) @ FindEndPoly
MoveTo failed to move to the location: <5458.775, 4400.846, 130.0398>
Goal: Moving to In Mine [Ref: "MoveTo" @line 8]
[QDBG] Done with forced behavior Bots.Quest.QuestOrder.ForcedMoveTo.
[QDBG] Starting behavior Bots.Quest.QuestOrder.ForcedMoveTo.
Goal: Moving to Not In Mine [Ref: "MoveTo" @line 9]
[QDBG] Done with forced behavior Bots.Quest.QuestOrder.ForcedMoveTo.
 

Attachments

Last edited by a moderator:
[Edit on Oct 15 2015 by Highvoltz] Fixed.


Having troubles with Frostfire Ridge questing profiles.
In Bladespire Citadel, there is a path which is now blocked by obstacles.
This path was previously used on quest (Last Steps : Quest 33527) - Part: Climb the Chain.
Coordinates: X="6893.826" Y="5839.869" Z="259.96"

Could this area be added as a blackspot in the meshes please.

View attachment 2948 2015-09-18 18.46.txt

This is basically 2 floors below where the actual quest item is. I had to run out, fly up two stories, and manually do this part.
 
Last edited by a moderator:
[Edit on Oct 15 2015 by Highvoltz] Fixed
Ashran needs re-meshing. 6.2.2 added some blockades to block paths which HB is trying to use still.

Raised ticket with extra info + screenshots on the comm dev tracker #121.
 
Last edited by a moderator:
[Edit on Oct 15 2015 by Highvoltz] Stuck position is in mid-air. This makes the problem not a mesh issue and I believe it to be caused by having low FPS - I see it's at 15 in log.



Northrend, The Storm Peaks, The Pit of the Fang:

Code: 
We are stuck! (<6819.35, -1502.807, 828.7805>)
We are stuck! (<6957.392, -1698.907, 836.4058>)
We are stuck! (<6973.242, -1707.431, 835.5942>)
We are stuck! (<6956.167, -1698.147, 835.8782>)
We are stuck! (<6965.129, -1706.506, 835.8078>)
We are stuck! (<6972.543, -1718.443, 835.7178>)
We are stuck! (<6970.102, -1716.552, 836.0738>)

<Hotspot X="6906.308" Y="-1662.394" Z="856.499" />

Bot ZigZag in mid Air
 

Attachments

Last edited by a moderator:
[Edit on Oct 15 2015 by Highvoltz] An internal ticket (HB-2650) has been opened for this.


Location:
Map: 669 (BlackwingDescent) || Zone: 5094 || SubZone: 0
new WoWPoint(-139.9756, -199.0608, 8.472528)
X="-139.9756" Y="-199.0608" Z="8.472528"

Log:
View attachment 10368 2015-10-15 17.55.txt

Screenshot:
WoWScrnShot_101515_175454.jpg vault.jpg

The whole end boss arena down in the middle of the map seems to be unmeshed. Normal movement does not work and click to move generates targeting issues with the mobs down there (Onyxia being blacklisted). It is probably either an oversight because it doesn't look like people would have to do something down there for an outside observer or there was a problem with the rising lava below the platform. Either way, I need a fix for this. :-)

Edit: I just realized that the whole thing seems to act as an elevator. Does that mean only CTM is viable and there is nothing really I can do about my problem?

<GameObject Name="Doodad_BlackWingV2_Elevator_Onyxia01" Entry="207834" X="-107.2132" Y="-224.6203" Z="7.033785" />
 
Last edited by a moderator:
[Edit on Oct 15 2015 by Highvoltz] This has been fixed.

Baradin Hold looks like the meshes still come from the time when only the right wing was open.

Map: 757 (BaradinHold) || Zone: 5600 || SubZone: 0
new WoWPoint(269.3985, 1384.256, 170.1918)
X="269.3985" Y="1384.256" Z="170.1918"

View attachment 10932 2015-10-15 20.04.txt

WoWScrnShot_101515_200441.jpg WoWScrnShot_101515_200445.jpg
 
Last edited by a moderator:
Edited by Highvoltz on Oct. 24 2015] Fixed
Shadowmoon Valley (Draenor) - Hallow's End specific mesh addition

The new dailies added to the Garrison have brought some ships to SMV for 1 of the quests (wowhead.com/quest=39719)
Location is X="-1193.71" Y="-328.1615" Z="17.94286"

There are 3 ships, closest to these XYZs is the only pertinent one.
There is a rope on the shore-side of the boat allowing jump up access. Boat layout is not meshed at this time.
 

Attachments

  • WoWScrnShot_102315_154940.jpg
    WoWScrnShot_102315_154940.jpg
    157.3 KB · Views: 3
Last edited by a moderator:
Is there anyway to get the option to disable " click to move" ? i just use the bot to do rotation ..i dont need it moving anywhere . ty
 
Greybush77 said:
Is there anyway to get the option to disable " click to move" ? i just use the bot to do rotation ..i dont need it moving anywhere . ty
Click to expand...

This section is reserved for issues regarding mesh navigation. I would redirect your question to the support section or general discussion area.
 
[Edited on Jan 31, 2016] Doesn't look like this is a problem anymore
Using Profit master and botter helper.But getting sometimes mesh problems, maybe Combat Routine or Profile error ??


<Hotspot X="4460.772" Y="780.1835" Z="181.2523" />

View attachment 5564 2015-10-27 16.41.txt
error1.jpg <--- just Screen of Honorbuddy error Message like bottom posted
WoWScrnShot_102715_170850.jpg <--- This is where he gets stucked


[@ProfitMaster - Profile Loader 50.470]: Mesh Navigator Error: Me not moving, and MoveResult : Moved Me at <4477.792, 788.7123, 181.1373>, Destination : <4474.424, 793.717, 181.0127>
[@ProfitMaster - Profile Loader 50.470]: Please report in Mesh Thread: https://www.thebuddyforum.com/honorbuddy-forum/10827-navigation-mesh-errors-post.html
Bot stopping! Reason: None Given
[@ProfitMaster - Profile Loader 50.471]: Arrived to <Neophyt der Sethekk@9ECC> [Can't Navigate(4)] at <4474.424, 793.717, 181.0127>@6.03. Me at <4477.792, 788.7123, 181.1373>
 
Last edited by a moderator:
[Edited on Jan 31, 2016] Fixed:

The Celestial Planetarium in Ulduar is missing its floor. It has been designed as a transparent, but walkable area consisting of an invisible mesh. The area that is walkable is marked by the glowing line visible in the screenshot. It forms the shape of a keyhole. I can not provide a log demonstrating the problem, because I already use CTM in my profile to work around the issue, but in this case the problem itself seems pretty obvious.

Map: 603 (UlduarRaid) || Zone: 4273 || SubZone: 0
new WoWPoint(1632.379, -235.5095, 417.323)
X="1632.379" Y="-235.5095" Z="417.323"

WoWScrnShot_102715_221836.jpg

WoWScrnShot_102715_221929.jpg
 
Last edited by a moderator:
You must log in or register to reply here.
Back
Top