How the drain soul sniping works ? What about the enemys at butcher mythic which walks around with full life until they reach the butcher and explode ? This adds are also snipeable. Thus this cr supports this ?
RebornBuddy Forums
Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
[PAID] [Warlock] Demonic - An Advanced Honorbuddy Warlock Routine [PvE/PvP]
- Thread starter Millz
- Start date
How the drain soul sniping works ? What about the enemys at butcher mythic which walks around with full life until they reach the butcher and explode ? This adds are also snipeable. Thus this cr supports this ?
Hello Millz,
First thanks for this awesome routine !
Did you add Intell proc from the "Spellbound Solium Band of the Kirin-Tor" to your AuraList.xml ?
I didn't find it.
Thanks !
Spellbound Solium Band of the Kirin-Tor - Item - World of Warcraft
Item - Attacks Proc Archmage's Incandescence - Spell - World of Warcraft
First thanks for this awesome routine !
Did you add Intell proc from the "Spellbound Solium Band of the Kirin-Tor" to your AuraList.xml ?
I didn't find it.
Thanks !
Spellbound Solium Band of the Kirin-Tor - Item - World of Warcraft
Item - Attacks Proc Archmage's Incandescence - Spell - World of Warcraft
Millz
Well-Known Member
- Joined
- Jan 15, 2010
- Messages
- 6,495
It's a bug because of the Hand of Gul'dan glyph. I'll fix it. You need to fix your trinket usage settings too.
Different issue, but I've found the bug. Will fix it. You need to fix your trinket usage settings
It will still cast SF in metamorphosis form if you have Dark Soul active. Looks like you manually cast it so it started using it. Entries below show what the routine is trying to cast on the lines where it shows the HP/Mana, and ones with ~ CL in them are what's actually been cast. You need to fix your trinket usage settings also
Code:
[21:43:34.130 N] [Demonic] [HP: 63] [Mana: 76] [Fury: 830] [DB:0] [Met:True] [Casting: Touch of Chaos] [On: Pol @ 71.6% - 114.6m - 42.8yds] [Id:78238] [TTD:426.2]
[21:43:34.240 D] [Demonic ~ CL] Cast:Touch of Chaos, On:Pol
[21:43:34.958 D] [Demonic ~ Debug] Staying in Metamorphosis - Moving
[21:43:35.098 N] [Demonic] [HP: 63] [Mana: 78] [Fury: 807] [DB:0] [Met:True] [Casting: Touch of Chaos] [On: Pol @ 71.5% - 114.3m - 36.2yds] [Id:78238] [TTD:413.2]
[21:43:35.259 D] [Demonic ~ CL] Cast:Touch of Chaos, On:Pol
[B][21:43:35.326 D] [Demonic ~ CL] Cast:Dark Soul: Knowledge[/B]
[21:43:35.805 D] [Demonic ~ Debug] Stopped moving.
[21:43:35.957 N] [Demonic] [HP: 64] [Mana: 73] [Fury: 780] [DB:0] [Met:True] [Using Trinket 1: Quiescent Runestone]
[21:43:36.178 D] [Demonic ~ Debug] Staying in Metamorphosis - Moving
[21:43:36.178 D] [Demonic ~ Debug] Don't Demonbolt. We don't have enough fury to cast 4.
[21:43:36.180 N] [Demonic] [HP: 64] [Mana: 74] [Fury: 790] [DB:0] [Met:True] [Casting: Soul Fire (Metamorphosis)] [On: Pol @ 71.3% - 114.0m - 30.7yds] [Id:78238] [TTD:478.7]Millz
Well-Known Member
- Joined
- Jan 15, 2010
- Messages
- 6,495
Will fix this, thanks.
Already in, check the affliction tab
It's not in there, but you can add it in for your copy
No, once AoE is disabled it only casts on current target. Try and position yourself further away from the adds up in the arena - once you get out of range of them it'll ignore.
Millz
Well-Known Member
- Joined
- Jan 15, 2010
- Messages
- 6,495
donnamonna
Member
- Joined
- Jan 15, 2010
- Messages
- 242
Different issue, but I've found the bug. Will fix it. You need to fix your trinket usage settings
Ah, right you are. I'm doing so much spec-swapping that I completely overlooked deactivating on-use trinkets for the spec that doesn't have any. Thanks
nilrem2004
New Member
- Joined
- Jun 27, 2010
- Messages
- 400
Yes it does, but simcraft doesn't take into account how long will adds last. Casting Cataclysm on adds with like 1M HP is viable but not in Meta since they won't last long enough to benefit from Doom. But if you would cast it in normal form you would get couple of corruption ticks which generate fury and give you more dps.
Simcraft isn't correct always as we proven it many times
Yes it does, but simcraft doesn't take into account how long will adds last. Casting Cataclysm on adds with like 1M HP is viable but not in Meta since they won't last long enough to benefit from Doom. But if you would cast it in normal form you would get couple of corruption ticks which generate fury and give you more dps.
Simcraft isn't correct always as we proven it many times
But if you change the usage of cata to normal form it will again be fucked up because the cr trys to cast cata every time as first and breaks the opener as the last time.
In fact of that the only Boss viable for cataclysm is actually tectus aka mote of tectus which have 4,7 mio life which is viable for the combination of meta/cata so please let as it is actually
nilrem2004
New Member
- Joined
- Jun 27, 2010
- Messages
- 400
So since only viable boss happens to be Tectus we can't plan to improve it for the future or improve it even more?
It is actually easy to setup cata casting to choose even automatically or by a setting if you wanna cast it in normal or meta form. For normal for we can use TTD on current target, low TTD normal form high TTD meta form. For opener we can use setting if we are in combat for less than 5 seconds to not cast it that way you get to have all procs up. Or a hotkey so we can manually switch between normal or meta casting, like we switch for AoE enabled/disabled.
We should always think how to improve it for future use
So since only viable boss happens to be Tectus we can't plan to improve it for the future or improve it even more?
It is actually easy to setup cata casting to choose even automatically or by a setting if you wanna cast it in normal or meta form. For normal for we can use TTD on current target, low TTD normal form high TTD meta form. For opener we can use setting if we are in combat for less than 5 seconds to not cast it that way you get to have all procs up. Or a hotkey so we can manually switch between normal or meta casting, like we switch for AoE enabled/disabled.
We should always think how to improve it for future use
I apologize. I have only thought on the actual Content. An improvement for the future like this would be awesome. Actually I Need to Switch every time from amount to amount and so on...
Hi Millz. Can you change the shadowburn sniping a little bit ? Actually I am progressing Imperator mythic and the sniping is very awful. My wl mates do twice as much shadowburn than I. I need to cast it manually when the Imperator reaches 20% even if I put in the settings cancel cast with low ms and of curse at 20%. I beginns to cast it when the target is ready to die.
Here is the log:
Here is the log:
Hey Millz...it might have been covered already but 913 pages is a little too much to search...i love your routine and have had it for years but started playing lock again in raids and the dps is awesome but the issue i have is, unless i'm missing a setting the Bot is using soulstone at the start of a boss pull on a tank and i cant find any control setting for it. It used to be able to set as a keybind only within the routine but its not there anymore. could you please help as i look like a muppet when asked to CR and have to say i put it on tank at start of a faceroll boss.
Last edited:
Otakumonkey
New Member
- Joined
- Jul 15, 2014
- Messages
- 3
Millz anyway I can setup the CR to cast doom on all targets that are engaged during a boss fight? Multiple boss fight etc. tectus, twins and imperator.
I have to manually cast it now, huge dps loss.
I have to manually cast it now, huge dps loss.
nilrem2004
New Member
- Joined
- Jun 27, 2010
- Messages
- 400
if your AoE is enabled it will cast it on all targets that have HP above doom setting and valid TTD to ensure that Doom will actually tick on that target. Make sure you enable AoE.
mellome
New Member
- Joined
- Mar 28, 2012
- Messages
- 559
Alright Mr Millz. I'm having a bitch of a time with this routine in PG.
Yes, I'm aware that it can work in PG but isn't optimized for it outside of manual settings.
Yes, the AOE rotation is set a bit higher and is toggled accordingly.
Yes, burst is used to drop adds quickly on necessity.
Yes, facing, movement and targeting are done manually.
I still am having a hard time getting beyond a certain point (on gold).
I've tried Affliction, I've tried Demonology and I've tried Destruction; same result, same head ache.
Your words of wisdom are always welcomed, and this has been running me up the wall.
Yes, I'm aware that it can work in PG but isn't optimized for it outside of manual settings.
Yes, the AOE rotation is set a bit higher and is toggled accordingly.
Yes, burst is used to drop adds quickly on necessity.
Yes, facing, movement and targeting are done manually.
I still am having a hard time getting beyond a certain point (on gold).
I've tried Affliction, I've tried Demonology and I've tried Destruction; same result, same head ache.
Your words of wisdom are always welcomed, and this has been running me up the wall.
In my opinion we need a extra button in the shadowburn section when enabled to force the usage of shadowburn at a certain % and a change in the havoc settings to enable the usage of havoc with only shadowburn at 20%. Actually sometimes it uses cb or shadowburn. Maybe also a fix in the advanced tab to add shadowburn so we can active at certain buffs to force shadowburn to be casted.
I also don´t understand the usage of havoc with cb. Yesterday it uses havoc really good in the first transmisson on imperator mythic on the gorian warmages but in the second transmission we are standing between the 2 gorian warmages so one mage is behind me and one in front me. Until the gorian reaver enters the field havoc is used correctly on the gorian warmages but as the reaver enters the cr uses havoc only on the reaver. Is this because the second warmage is standing behind me or because the reaver stands in a better line of sight position ? A fix would be really appreciated.
And the next thing is the usage of rain of fire. Every one knows that at some stages it is useful but on imperator mythic it is really stupid because when I like to do a aoe immolate on the unstable anomaly adds the cr uses first rain of fire and than pops up a aoe immolate. So then all the people are flaming me why I use rain of fire it is bullshit and so on. And the other thing is I can´t push dmg because every one sees the rain of fire animation and knows that I am aoeing the mobs and ask me to stop dmg on it. Without rain of fire life would be even better so can you please add a button so the people can decide if they like to use rain of fire or not ? So it will be completely moved out of the rotation ?
And of course aoe immolate don´t work every time. Sometimes it is casted first when the condition is there for heavy aoe and sometimes it first spamming aoe incinerate and after 3-4 casts it than uses aoe immolate. Immolate should be used every time first. You can see this on my log from yesterday. This happens only sometimes and I think it is because of backdraft up so the cr forces to push out all backdrafts until 1 is left and than casts immolate. This happens also when DS is active. It firstly dumps all the backdrafts with incinerate and than uses cb. This happens also when you have 1 or 2 embers left. It forces the incinerate/backdraft things and than uses cb when DS is nearly over.
Last edited: