What's new
  • Visit Rebornbuddy
  • Visit Panda Profiles
  • Visit LLamamMagic
  • Visit Resources
  • Visit Downloads
  • Visit Portal
RebornBuddy Forums

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

TuanHA Paladin - The Ultimate Experience

@tuanha

I've tested challenge mode as holy today. Earned Bronze :) But in some situations the Heal was a bit "slow". He used big spells that casts too long and the tank died.

Is it possible to add a new settings-tab like "challenge mode" , where he uses "power heal" ? ^^ I think if this will be possible he can fit silver or gold ;)

Used: rev63 with PvE Holy Specc and Glyphs

I have done a test of holy paladin, I've been helping make several tests PVP and I can say that the holy paladin healing done very well and also dissipates very well but the lag makes your internet, all that has Tuanha default since I have added 2% more and it works perfectly, much depends on your lag the decrease or increase the percentage
 
I have a 32k internet line and always between 20-30ms. Would it help any if I put the graphics on medium?
 
I have a 32k internet line and always between 20-30ms. Would it help any if I put the graphics on medium?

Of course man, all you can slow down your game can be a problem but if you want to play in raids of 25 people by example i think that you need put graphic on medium for more security

Me have got graphics on medium for example and i havent got any problem...
 
@tuanha

I've tested challenge mode as holy today. Earned Bronze :) But in some situations the Heal was a bit "slow". He used big spells that casts too long and the tank died.

Is it possible to add a new settings-tab like "challenge mode" , where he uses "power heal" ? ^^ I think if this will be possible he can fit silver or gold ;)

Used: rev63 with PvE Holy Specc and Glyphs
In Holy Spec, how to find the best setting?

For a healer, there's always a balance between healing done vs mana used.

If you run out of mana half way of the fight => You use mana too fast
Solution: You need to adjust Combat Routine use less mana intensive spell

If you have 50% mana at the end of the fight => You use mana too slow
Solution: You need to adjust Combat Routine use more mana intensive spell

If you go out of mana at the end of the fight => Perfect, you don't have to adjust anything.

So what are mana intensive spells?
Only 3 spell: Holy Radiance, Divine Light, Flash of Light

How do I adjust Combat Routine use more mana intensive spell?
Simply Adjust Number (for example change Holy Radiance [5] unit below [80] to Holy Radiance [5] unit below [90] | Divine Light Unit below [70] to Divine Light Unit Below [80] | Flash of Light Unit below [50] to Flash of Light Unit Below [60])

How do I adjust Combat Routine use less mana intensive spell?
Simply Adjust Number (for example change Holy Radiance [5] unit below [80] to Holy Radiance [5] unit below [70] | Divine Light Unit below [70] to Divine Light Unit Below [60] | Flash of Light Unit below [50] to Flash of Light Unit Below [40])

Why don't you adjust it automatically?
There is no way to adjust it automatically, it depend of how long the fight last, how many spirit you have and other factor like how good your dps are, how many people keep standing on fire...

That is the basic concept, hope it help you get the best setting to get most of healing for each encounter.

Thank you for reading :D
 
My only issue is that i dont want the CC to use fist of justice for me but it still is even with it unchecked. How can I make the CC just not FoJ/HoJ at all?
How do I turn Fist/Hammer of Justice off?
Fist/Hammer of Justice use as 2 utility: To interrupt enemy or To Crowd Control Enemy.
To turn it off, set Hammer of Justice Ms Left to [0], set Crowd Control Enemy If My HP Below to [0]

How do I turn off a spells?
Uncheck the checkbox or set the value to [0]
If you don't want the Combat Routine to cast Flash of Light, just change Flash of Light Unit Below to [0]
If you don't want the Combat Routine to cast Crusader Strike, just uncheck the Crusader Strike check box.

Also id like to use auto buff but is there a way to prioritize Might over Kings?
By default, Holy and Protection prefer Blessing of Kings and Retribution prefer Blessing of Might. I'll make a GUI change to let you select the Blessing of your choice.
 
Last edited:
Hi tuanHA,

the problem with "my" bug in your CR, history read here: Posting

I tested now for hours and found the problem, it's definitly in your CR! I tested revision for revision, downgrading, upgrading, downgrading, etc., at the end rev. 1 to 53 works great, without any problems, with rev. 54 to now it is broken for me, i don't know why, it's my german client or something else, but i found the code lines in your CR that breaks the whole BGBuddy thing.

I search for the diffs from rev. 53 to 54, 3 files was modified, I wrote down the changes, line for line and tested evertime with HB/BGBuddy. This is the Problem, rev. 54, THCommon.cs, line 656 and 657:

old rev. 53 (works!):
Code:
!SpellManager.HasSpell("Avenger's Shield") &&
[B](Me.CurrentMap.IsDungeon || Me.CurrentMap.IsRaid) &&[/B]
!CastingorGCDL(),

new rev. 54 (broken!):
Code:
!SpellManager.HasSpell("Avenger's Shield") &&
[B]!Me.CurrentMap.IsArena &&[/B]
[B]!Me.CurrentMap.IsBattleground &&[/B]
!CastingorGCDL(),

I put the rev.53 lines in the rev.54 THCommon.cs and now IT WORKS GREAT, perfect! For the Final check i switch to the newest revision (rev. 63), change in the THCommon.cs file the two new lines to the old "(Me.CurrentMap.IsDungeon || Me.CurrentMap.IsRaid) &&" and now rev. 63 works nice, too. Please think about it, what can going wrong with these little codelines, or I must change these lines on every svn update. :(

Thanks!
Let me look again at this, it hard because I test very long as English WoW client and there's no problem and I don't have German Client... If it happen only to German Client, that mean the problem come from HB and not from my Combat Routine.

However, I'm trying to find a way to workaround that.

Thank you for reporting.
 
Hey guys, let talk about paladin, this is not a poll for what next class lol...

Is there anything you guys need me to do to make paladin perfect?
 
Hey guys, let talk about paladin, this is not a poll for what next class lol...

Is there anything you guys need me to do to make paladin perfect?

for retri, make flash of light cast ONLY on 3 stacks of selfless healer while in battle PVE/PVP, if selfless healer is NOT talented, do NOT cast FoL ever in battle, out of combat only flash until mana is @ 33% thisway there is always mana for the next quick fight
retri should cleanse itself, at least make a on/off switch for it, this will help a lot

holy, there is absolutley nothing i can whish for right now, my holy pally rules all the way :)

i do not tank with paladin so no comments there
 
For prot, because of how much we gain a free avenger's shield, is it possible to have this used on CDm or do you believe this may create threat issues if more adds get pulled into a fight?

-Grim
 
hi tuanha, ich hab mir gestern deine routine gekauft.
nur leider wenn ich die "TuanHAPaladinSpecialEdition" starte meldet sich der bgbuddy nicht f?r das bg an.
mein pala bufft sich mit "segen der macht" und es geht nicht weiter.
wenn ich den "segen der macht" manuell weg klicke (in wow) dann bufft er wieder "segen der macht" und meldet sich f?r das bg an.
wenn das bg dann anf?ngt und ich best?tige soll macht der bot wieder nichts.
w?hle ich am anfang z.b. singular oder clu l?uft alles.
was kann ich tun oder mach ich falsch??

ENG:

tuanha hi, I've bought yesterday your routine.
but unfortunately when I 'TuanHAPaladinSpecialEdition "run the bgbuddy dont queue for the bg.
my pala buffs with "blessings of migth" and it goes no further.
when I use the "blessing of might" manually click away (in wow) then buff again "blessing of might" and signs up for the bg.
if the bg starts and I have to confirm the buddy makes nothing.
I choose e.g. at the beginning singular or clu runs everything.
what can I do or I do wrong?

LOG:
View attachment 1424 2012-11-20 17.42.txt <- tuanha
View attachment 5088 2012-11-20 18.09.txt <- clu
 
Last edited:
first i was skeptical about the 15 bucks and whether the routine is worth it since the standard routine worked "okay" already. I decided to buy/donate and I have to admit its an awesome CR !!!1!oneeleven

I'm ret and I use the CR with the lazy raider bot for bg and arena. I love to see my pally throw hand of protection/sac on my teamates as well as healing like i would never be able to with glory/prism.

keep up the good work! srsly
 
For me on Retribution it still seems to FoL me, even when I set it to 0%, no matter what environment or setting I am in. Which is annoying in quite a few situations. Otherwise great! CC.

Myra
This. I got asked if I wanted to heal while in a raid by the raid leader since the CR use FoL as Ret. No matter settings or talent.
 
Hi tuanHA,

the problem with "my" bug in your CR, history read here: Posting

I tested now for hours and found the problem, it's definitly in your CR! I tested revision for revision, downgrading, upgrading, downgrading, etc., at the end rev. 1 to 53 works great, without any problems, with rev. 54 to now it is broken for me, i don't know why, it's my german client or something else, but i found the code lines in your CR that breaks the whole BGBuddy thing.

I search for the diffs from rev. 53 to 54, 3 files was modified, I wrote down the changes, line for line and tested evertime with HB/BGBuddy. This is the Problem, rev. 54, THCommon.cs, line 656 and 657:

old rev. 53 (works!):
Code:
!SpellManager.HasSpell("Avenger's Shield") &&
[B](Me.CurrentMap.IsDungeon || Me.CurrentMap.IsRaid) &&[/B]
!CastingorGCDL(),

new rev. 54 (broken!):
Code:
!SpellManager.HasSpell("Avenger's Shield") &&
[B]!Me.CurrentMap.IsArena &&[/B]
[B]!Me.CurrentMap.IsBattleground &&[/B]
!CastingorGCDL(),

I put the rev.53 lines in the rev.54 THCommon.cs and now IT WORKS GREAT, perfect! For the Final check i switch to the newest revision (rev. 63), change in the THCommon.cs file the two new lines to the old "(Me.CurrentMap.IsDungeon || Me.CurrentMap.IsRaid) &&" and now rev. 63 works nice, too. Please think about it, what can going wrong with these little codelines, or I must change these lines on every svn update. :(

Thanks!
New revision add prefer Blessing of Might/Kings
Fix German client BGBuddy (hopefully)

Please test and let me know if it work.

Thank you.
 
How do I turn Fist/Hammer of Justice off?
Fist/Hammer of Justice use as 2 utility: To interrupt enemy or To Crowd Control Enemy.
To turn it off, set Hammer of Justice Ms Left to [0], set Crowd Control Enemy If My HP Below to [0]

How do I turn off a spells?
Uncheck the checkbox or set the value to [0]
If you don't want the Combat Routine to cast Flash of Light, just change Flash of Light Unit Below to [0]
If you don't want the Combat Routine to cast Crusader Strike, just uncheck the Crusader Strike check box.


By default, Holy and Protection prefer Blessing of Kings and Retribution prefer Blessing of Might. I'll make a GUI change to let you select the Blessing of your choice.

Thanks Tuanha il try that out
 
hi tuanha, ich hab mir gestern deine routine gekauft.
nur leider wenn ich die "TuanHAPaladinSpecialEdition" starte meldet sich der bgbuddy nicht f?r das bg an.
mein pala bufft sich mit "segen der macht" und es geht nicht weiter.
wenn ich den "segen der macht" manuell weg klicke (in wow) dann bufft er wieder "segen der macht" und meldet sich f?r das bg an.
wenn das bg dann anf?ngt und ich best?tige soll macht der bot wieder nichts.
w?hle ich am anfang z.b. singular oder clu l?uft alles.
was kann ich tun oder mach ich falsch??

ENG:

tuanha hi, I've bought yesterday your routine.
but unfortunately when I 'TuanHAPaladinSpecialEdition "run the bgbuddy dont queue for the bg.
my pala buffs with "blessings of migth" and it goes no further.
when I use the "blessing of might" manually click away (in wow) then buff again "blessing of might" and signs up for the bg.
if the bg starts and I have to confirm the buddy makes nothing.
I choose e.g. at the beginning singular or clu runs everything.
what can I do or I do wrong?

LOG:
View attachment 68736 <- tuanha
View attachment 68737 <- clu

Hehe genauso wie ich, siehe meine vorherigen postings. :) Hab da einen workaround gefunden.

@tuanHA he has the same probleme like me. ;)
 
Just donated for your paladin CR! Look forward to checking it out. Thanks for your great CR's and everyones hard work! +Rep
 
Also I was wondering if this will work just as well with build .507 of the bot? I have read a lot of complaints about .515 so I have not updated yet. Opinions?
 
This CC and it's pally sister is so good, It's not even funny. I play both a Mistweaver and a Hpally and i'm virtually un-killable unless there are very good dps pounding on me (rare in random bgs). I sometimes have as many as 8 people trying to kill me with no success. In fact, In Twin Peaks, Temple, And WSG I am responsible For winning most BGs simple because once I take the flag or an orb it is almost impossible to kill me unless they have very good dps or they zerg me with 8 people. and even then, I've had times when myself with a couple of dps held off an entire team.
I just love it.
 
Back
Top