ShamWOW for HB2 - An Enhance/Elemental/Resto + PVP/RaF Healbot by Bobby53

[Jianyu]

So.. Will the Current attached ShamWoW work with 3.3.5 or not?
And have there been a tweak for the healing to work? With the old one to 3.3.3 I have never had any problem with it.

 

[shizbizz]

can someone provide a link to the newest shamwow please?

 

[deltasniper3]

Bobby, are you not having the healing issue as well? Because everyone I've seen botting a shaman has had the problem, that's why I posted the modified code to the HB forum. It's the shaman.cs that comes with the new HB - but its modified so that healing works properly.

+1 to that imo not a big deal but hey w/e floats his boat if he doesnt even want to look and see what u did his loss

 

[LiquidAtoR]

There are the last few bits of testing and changes to be done, and then it will be released by bobby in due time.
After all it's all voluntary work, so you can't demand a new release right away with any release from HB or WoW.
Just wait patiently for it, it's being worked on, I can assure you.

And in regards to the shaman version released with HB itself.
This is not a version that is supported by Bobby as far as I'm aware, and therefor doesn't belong here (nor any codechanges).
It's a adapted shaman version from HB1 to HB2 and I don't think Bobby had anything to do with that change.

 

[bobby53]

Bobby, are you not having the healing issue as well? Because everyone I've seen botting a shaman has had the problem, that's why I posted the modified code to the HB forum. It's the shaman.cs that comes with the new HB - but its modified so that healing works properly.

Thanks Likwid! Good to see you back on forums also! The Shaman.cs bundled with HB for the moment is what it is; an older version of ShamWOW. Fixes and enhancements to that are in the version that can be downloaded from the forums. At the point where the one available from the forums is stable enough, it will replace the one bundled with HB.

 

[bobby53]

+1 to that imo not a big deal but hey w/e floats his boat if he doesnt even want to look and see what u did his loss

Deltasniper... appreciate the feedback. You may misunderstand the intent. I'm trying to consolidate how many different versions of ShamWOW have to be supported, not increase them. Thats the whole point of there being one source to download from. I'm more than happy to take suggested changes and incorporate as needed, be they high level descriptions or code fragments sent to me. If there is a problem with the CC, please post a log and description as described and I'll get an update posted ASAP. Lacking that there are too many combinations of HB versions and CC versions for me to try and stumble through re-creating the circumstances the user had resulting in the behavior they experienced when the logfile provides the details needed. Posted modifications complicate this even further creating more possibilities. For now I will continue focusing on helping resolve or working around the HB PVP problem and subsequently getting the new CC posted as it fixes the bugs reported so far, many bugs that haven't, and contains a lot of enhancements both to the UI and Shaman behavior. Thanks again for the post!

 

[bobby53]

can someone provide a link to the newest shamwow please?

? See the first post in this thread.

 

[shizbizz]

? See the first post in this thread.

well does the download work for the newest HB and 3.3.5a? sorry for asking i'm fairly new to honorbuddy and this whole site

 

[Keithw]

It's not working for me

 

[bobby53]

ShamWOW v4.06f posted. This incorporates the API name changes made in HonorBuddy 1.9.4.5a that would have caused it to stop working. This version has seen only light PVE/PVP testing with a 60+ Enhancement.

If you have a problem this build, please attach a log. If you arent sure how to do that, consult the FAQ (post #2 in this thread.) Otherwise just look for the next major release of ShamWOW coming soon.

 

[shizbizz]

here is my log. all i did was install the contents of the file into the CC folder and ran honorbuddy then i got error messages.

 

[nfllover100]

Please post a log. Here is an excerpt from the FAQ in this thread for ease of reference....

3. I'm having a problem with ShamWOW. How do I post an issue?
Read at least the first four posts in this thread. If you don't see information on your issue, you need to do the following so I can look into it for you:

1. Close HonorBuddy
2. Delete the contents of your HonorBuddy\LOGS folder
3. Start HonorBuddy
4. Choose CC Configuration from the General Settings tab
5. Make sure the Debug Output setting is checked,
6. Close the ShamWOW Options window
7. Bot for a few minutes re-recreating your issue.
8. Stop HonorBuddy
9. Reply in this thread and Attach the complete LOG file you just created.
​

I cant even get to the Configuration to select Debug. It says there is no Configuration for this CC.

 

[bobby53]

here is my log. all i did was install the contents of the file into the CC folder and ran honorbuddy then i got error messages.

Shizbizz, Its an installation issue. A ShamWOW folder is needed. Take a look at INSTALL.TXT included in the .zip and then repeat the installation making sure that the directory structure you create matches what is contained in that documet. Also, +rep for attaching a log. I wouldn't have been able to tell it was an install issue and help you so quickly without it.

 

[bobby53]

I cant even get to the Configuration to select Debug. It says there is no Configuration for this CC.

nfllover100, Please download the .zip attached to the first post in the ShamWOW thread and follow the Installation instructions in INSTALL.TXT.

 

[nfllover100]

nfllover100, Please download the .zip attached to the first post in the ShamWOW thread and follow the Installation instructions in INSTALL.TXT.

I have done that twice to make sure I am doing it correctly. This is the part of the log that will help you see what it is doing. It is still loading 4.00b even though I have the latest version 4.06f in the ShamWOW folder in customclasses folder.

edit: I also have the standing there and dying issue when it says Healing in the log.

 

[shizbizz]

Shizbizz, Its an installation issue. A ShamWOW folder is needed. Take a look at INSTALL.TXT included in the .zip and then repeat the installation making sure that the directory structure you create matches what is contained in that documet. Also, +rep for attaching a log. I wouldn't have been able to tell it was an install issue and help you so quickly without it.

Wow thank you it seems to be working now.

 

[likwid818]

Thanks Likwid! Good to see you back on forums also! The Shaman.cs bundled with HB for the moment is what it is; an older version of ShamWOW. Fixes and enhancements to that are in the version that can be downloaded from the forums. At the point where the one available from the forums is stable enough, it will replace the one bundled with HB.

No problem Bobby - I'm glad to help. And thanks for the warm welcome. I realize that the version bundled with HB is an outdated version - however, it's the version that 90% of the users are going to be using - albeit an updated version is available here. I understand what you're saying about wanting to consolidate all the code into one place and that's understandable. But again, like I said - 90% of the users aren't even going to think to come here to look for an update. I was also unsure whether the bug affected the new versions of ShamWOW, so I did not post a bug report here. That would be my fault, and I apologize - however I did post a bug report with a log included on the HB thread - but that was using the outdated version so it doesn't really matter.

All I did to fix the "not healing" issue was copy the contents of HealMyself() and paste them into Heal(), removing the 2 returns. A quick fix if anything, but it seems to work like a charm. My shaman is at 42 now with just over 4 days /played with the outdated/modified version of the CC.

 

[Jon310]

I have done that twice to make sure I am doing it correctly. This is the part of the log that will help you see what it is doing. It is still loading 4.00b even though I have the latest version 4.06f in the ShamWOW folder in customclasses folder.

edit: I also have the standing there and dying issue when it says Healing in the log.

Loading config file: C:\Documents and Settings\Admin\Desktop\HB\CustomClasses\Config\Shaman.Config

If you have a config folder in your CustomClasses folder, your doing it wrong. Did you remember to delete all the other CC's out of the CustomClasses folder? At the very least delete the other Shaman cc and the Config Folder in the CustomClasses folder.

The only thing that should be in your CustomClasses folder is the ShamWOW folder

 

[Hungrydane]

Anyone else having MAJOR targeting issues after the patch?... Dunno if its the actual HB but my druid dont got issues but my shaman keeps ignoring tons of monsters.

 

[bobby53]

I have done that twice to make sure I am doing it correctly. This is the part of the log that will help you see what it is doing. It is still loading 4.00b even though I have the latest version 4.06f in the ShamWOW folder in customclasses folder.

edit: I also have the standing there and dying issue when it says Healing in the log.

You are correct about the log helping, but the problem you are describing is addressed by Step #1 of INSTALL.TXT:

1.  Remove any and all Shaman CC files in the HB\CustomClasses folder as well as any folders below that, including any prior ShamWOW installations.