[PAID] Rampage - Richie's Arms Warrior PvP Combat Routine [Pro Edition]

[qzt]

I think i understand but can u still add fear to interrupt healer if his healing cast is not interruptable without slowing the cr?

Sent from my GT-I9505 using TheBuddyForum mobile app

 

[OhaiDur]

It already uses fear when when silence immunities are up, its also uses fear too interupt casts that are too close too charge but just out of melee range.

 

[qzt]

View attachment 5128 2013-11-20 16.05.txt

cr used few times shock wave and while healer wosent casting>FAIL
cr not using in melee range Storm Bolt>FAIL
cr not fearing/stormbolt/shockwave at all if the target is casting healing that cannot be pummeled>FAIL

richie could you please check where the problem is?

If needed i will record next Arena to show, just need to say.

 

[Molestia]

Non related CR issue, more like an svn issue. I just donated to support Richie and he sent me his PRO edition. But when I moved it on my Routines, upgraded to working copy and try to Update to latest revision, it automatically rejects me as a user and does not give me the chance to input my credentials. Anyone else that faced that issue before?

 

[qzt]

Delete it and try again

Sent from my GT-I9505 using TheBuddyForum mobile app

 

[Molestia]

Delete it and try again

Sent from my GT-I9505 using TheBuddyForum mobile app

Tried it several times, nothing. Also tried making a new folder with the correct path, still nothing.

Edit: Resolved, cleared my saved authentication data. Dunno why this happened, since I have never used any of Richie's CR before :S

 

[RichieCR]

View attachment 111030

cr used few times shock wave and while healer wosent casting>FAIL
cr not using in melee range Storm Bolt>FAIL
cr not fearing/stormbolt/shockwave at all if the target is casting healing that cannot be pummeled>FAIL

richie could you please check where the problem is?

If needed i will record next Arena to show, just need to say.

Shockwave: Because it used it for burst. Check the options, you can turn it off.

You said that it's not using Storm Bolt in melee range:
[15:13:59.563 N] 59:563 - HP: 59% - Rage: 6 - xxx(Priest) - 1y - 52% hp - Storm Bolt (Interrupt focus) It's using it to interrupt.
[15:07:59.384 D] UseStormBoltForSingleTarget = False You disabled it's usage on your target.

As you can see above it's using Storm Bolt, Shockwave and Intimidating Shout are after SB in priority for interrupting. It would use them as well...

FAIL huh?

Please check the options, or ask about how stuff works before stating that it's a fail. It's quite offensive as well tbh...

 

[RichieCR]

Tried it several times, nothing. Also tried making a new folder with the correct path, still nothing.

Edit: Resolved, cleared my saved authentication data. Dunno why this happened, since I have never used any of Richie's CR before :S

You forgot to answer to the PM to tell me that it worked.

You may saved a username/password for someone else's SVN and it's possible that the SVN client tried to use that username/password for my CR's SVN. If I recall correctly TuanHA is using the same SVN server provider as I do.

 

[Molestia]

You forgot to answer to the PM to tell me that it worked.

You may saved a username/password for someone else's SVN and it's possible that the SVN client tried to use that username/password for my CR's SVN. If I recall correctly TuanHA is using the same SVN server provider as I do.

Huh indeed I have been pushing rating non stop and I forgot it I am now at 1950 and pushing for 2.1k today

 

[Sprxx]

Hello!

Is there any success stories anyone would like to share regarding this CR? I'm considering a donation
Also maybe a few tips or tricks for a beginner warrior that loves 3v3.
I have achieved 2.4k rating before, but with a mage, and on my own so tips regarding the CR itself (Settings etc.) would be to prefer!

Thanks in advance!

 

[qzt]

dont take it as a offense Richie i just want to help make the cr to be good and i saw all my interrupt spell ready to be used but it dint interrupt.....the warrior isnt my main just an alt but i want to support where i can.

 

[OhaiDur]

dont take it as a offense Richie i just want to help make the cr to be good and i saw all my interrupt spell ready to be used but it dint interrupt.....the warrior isnt my main just an alt but i want to support where i can.

What HP was the caster at? i think i remember a post where richie explained that the CR would only use Disrupting shout if a healer was below 40% and pummel was on CD, "I think" i read allot of the CR class forums and my brain is scambled between them all xD.

 

[phaedrus]

What HP was the caster at? i think i remember a post where richie explained that the CR would only use Disrupting shout if a healer was below 40% and pummel was on CD, "I think" i read allot of the CR class forums and my brain is scambled between them all xD.

Cr using Disrupting shout only at focus target (if you have focus).

 

[Farix]

Richie, I do not have logs as I had to shut down and stop playing (will get one later)

But, Stormbolt is not being used without my intervention. (On focus targets while casting, or on single target in my dps rotation.)

That being said, I did bind it to one of the pre-defined hotkeys you allow us to bind, but it is not registering it and uses it unreliably.

<UseStormBoltForSingleTarget>True</UseStormBoltForSingleTarget>

Is out of my settings that I haven't touched. I'll do more testing and get back to you on it w/ a log. In the meantime, please look into removing the bound hotkeys, and allow the player to either select "Use StormBolt for DPS on Target [ ]" or "Use StormBolt as interrupt on healer [ ]". Same for shockwave, etc.

Additionally,

There are times when I intervene and use Bladestorm; Usually because it's just a really prime time to use it and the bot immediately cancels it. Would it be possible to add that if Bladestorm is active, it ONLY stops it to get a pro ass interrupt or intervene peel?


All of the above being said, this CR is allowing me to move my bot around and is owning kids at 2170 MMR and I've hit 2k in less than 100 games. Very good work so far, and not many suggestions outside of removing the unreliable bindings "alt, ctrl, shift' "alphanumeric selections" you force us to use; and just allow us to designate how certain abilities should be used. Similarly to how Millz allows you to choose what the priority on polymorph is; i.e. Target, Focus, Any healing & Any casting. Allowing us to select this use of the abilities, saves us from having to intervene on occasion and still not get abilities off in time.

Also, Mass Spell Reflect should also treat hex's as traps and intervene/reflect them similarly to the 90% success rate of the bot eating traps (sometimes, intervene just isnt enough range and it's nothing the bot is doing wrong).

 

[QuaLiT1]

Hello!

Is there any success stories anyone would like to share regarding this CR? I'm considering a donation
Also maybe a few tips or tricks for a beginner warrior that loves 3v3.
I have achieved 2.4k rating before, but with a mage, and on my own so tips regarding the CR itself (Settings etc.) would be to prefer!

Thanks in advance!

Its easy take more than 2k rating with this CR, Im playing hard with monk and mage right now, but only making weekly conquest cap 2v2 games with warrior I have 2029 rating, and Im not good warrior player, just know the basic things, help it with some macros, and CR and my partner do the rest , just find a partner with high burst and dont setup ur warrior like noobish with bladestorm, and all will go fine

 

[RichieCR]

Hey,

the interrupt logic is that it's interrupting anything that is on the list(in the xml file) when the cast time left is below the set amount.

The order it's using the spells. Obviously it's only using one interrupt for one spellcast.

Pummel > Disrupting Shout > Arcane Torrent > Storm Bolt > Shockwave > Intimidating Shout > War Stomp

Only using the spells when the caster(the target or the focus) is in range.

There are no other stuff like hp% are used when deciding to interrupt or not.

Cheers,
Richie

 

[RichieCR]

Cr using Disrupting shout only at focus target (if you have focus).

It's interrupting your target AND your focus.

 

[phaedrus]

It's interrupting your target AND your focus.

Weird... Cr never interrupted my current target with Disrupting Shout.

 

[Molestia]

Is it possible to add a feature like Tuan's that when CR detects a keypress, it pauses the rotation for a set amount of msec ( either set to 100 -300) or leave it blank for us to set?

 

[RichieCR]

But, Stormbolt is not being used without my intervention. (On focus targets while casting, or on single target in my dps rotation.)

That being said, I did bind it to one of the pre-defined hotkeys you allow us to bind, but it is not registering it and uses it unreliably.

<UseStormBoltForSingleTarget>True</UseStormBoltForSingleTarget>

Is out of my settings that I haven't touched. I'll do more testing and get back to you on it w/ a log. In the meantime, please look into removing the bound hotkeys, and allow the player to either select "Use StormBolt for DPS on Target [ ]" or "Use StormBolt as interrupt on healer [ ]". Same for shockwave, etc.

Storm Bolt is used to interrupt, please check my previous post to see the order how they're used.

Also there's an option to let the CR use it on your target. Should I change the option's wording? ("Use Storm Bolt in the single target rotation")

Additionally,

There are times when I intervene and use Bladestorm; Usually because it's just a really prime time to use it and the bot immediately cancels it. Would it be possible to add that if Bladestorm is active, it ONLY stops it to get a pro ass interrupt or intervene peel?

There's an option for you to set the hp% to cancel bladestorm when you fall below. It will ONLY cancel it when you're below this hp%.

All of the above being said, this CR is allowing me to move my bot around and is owning kids at 2170 MMR and I've hit 2k in less than 100 games. Very good work so far, and not many suggestions outside of removing the unreliable bindings "alt, ctrl, shift' "alphanumeric selections" you force us to use; and just allow us to designate how certain abilities should be used. Similarly to how Millz allows you to choose what the priority on polymorph is; i.e. Target, Focus, Any healing & Any casting. Allowing us to select this use of the abilities, saves us from having to intervene on occasion and still not get abilities off in time.

Also, Mass Spell Reflect should also treat hex's as traps and intervene/reflect them similarly to the 90% success rate of the bot eating traps (sometimes, intervene just isnt enough range and it's nothing the bot is doing wrong).

I'm not FORCING you to use keybinds. People were asking for them almost since I created the CR.

If you spend some time on browsing the options then you'll find options for almost everything where it makes sense. There are stuff that I wasn't aware and added, because people asked for it. If you think that there are functionality that should be able to turned on/off then tell me and I'll add the option for it, but I won't add options for EVERY spells, because there will be a lot of them that people will never use.

That said, if there's an option/functionality that's missing, just report to me and if it makes sense I'll add it as soon as I can.