What's new
By:
  • Visit Rebornbuddy
  • Visit Panda Profiles
  • Visit LLamamMagic
  • Visit Resources
  • Visit Downloads
  • Visit Portal
RebornBuddy Forums

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

[Plugin] MapRunner

Status
Not open for further replies.
Any idea why the bot will enter the boss room then end the run?

[AreaTransitionTask] Boss room has been entered. Area transition is not needed anymore.
[MapExplorationTask] Now exploring to the location {1425, 1012} (98) [2.977906 %].
[BeginUseAt] 3 False {1510, 1005}
[MapExplorationCompleteTask] Now finishing the map run.
[MapBuddy][Statistics] Map finished.
 
You are posting a MapBuddy error / problem in the MapRunner thread. They are 2 different plugins. MapBuddy (the one you are using) has not been updated for quite a while now, and doesnt work well in my experience with all the new maps, mainly because of the issue you are describing (leaves without killing most of the bosses).

Now MapRunner (the plugin in this thread) works for a lot of the maps, but still has some issues with certain boss areas.

MapBot is a third map plugin that is planned to be released relatively soon, at least according to ExVaults latest spoiler.
 
Edit: I realise the above post was not refering to the logs i posted

clandestine said:
Currency stashtabs are not supported by maprunner, put orbs in a non-currency tab.
Click to expand...
In the run i did place currency outside of my currency stash, even when i choose to run normal maps, it still does not run
 
Last edited:
Just make sure you have enough orbs in your tab and you won't have a problem. From the looks of it, all the other maps you had in stash where either ignored in your settings or above your specified level.
 
Unknown Buddy said:
List of map prefix mods - Official Path of Exile Wiki
List of map suffix mods - Official Path of Exile Wiki

Punishing = Physical Reflect
Click to expand...

still dont get what exactly i need to put in

Mod Id MapMonsterPhysicalReflection3Map2Tier
Name Punishing
Group MapMonsterPhysicalReflection
Mod type MapMonsterPhysicalReflectionMap2Tier
Mod domain Area (Id: 5)
Generation type Prefix (Id: 1)
Req. level 1
Effect 16% increased Quantity of Items found in this Area
8% increased Rarity of Items found in this Area
Monsters reflect 18% of Physical Damage
Granted Buff Id
Granted Buff Value
Granted Skill
Tags



or just putting Punishing = Physical Reflect will do it ?
 
You literally just type in the word "Punishing" to ignore Physical reflect.

Punishing is a prefix, so its just going to be the one word. If you wanted to ignore Temporal Chains (which is a suffix), it would look like this:

of Temporal Chains



Its the exact wording in the 2 links i gave you.
 
Unknown Buddy said:
You literally just type in the word "Punishing" to ignore Physical reflect.

Punishing is a prefix, so its just going to be the one word. If you wanted to ignore Temporal Chains (which is a suffix), it would look like this:

of Temporal Chains



Its the exact wording in the 2 links i gave you.
Click to expand...
thank you sir!
 
imNoTYOURbuddy said:
still dont get what exactly i need to put in

Mod Id MapMonsterPhysicalReflection3Map2Tier
Name Punishing
Group MapMonsterPhysicalReflection
Mod type MapMonsterPhysicalReflectionMap2Tier
Mod domain Area (Id: 5)
Generation type Prefix (Id: 1)
Req. level 1
Effect 16% increased Quantity of Items found in this Area
8% increased Rarity of Items found in this Area
Monsters reflect 18% of Physical Damage
Granted Buff Id
Granted Buff Value
Granted Skill
Tags



or just putting Punishing = Physical Reflect will do it ?
Click to expand...

I'm gonna get in here to reply to this before some other self aware jerk gets to you first with a snarky reply.

Anyway, I can see that you are new to the whole botting thing and how forums work. This is fine, but try to be a little more aware of the content being presented to you.
On the first page of this thread you can click the little boxes that read "spoiler" and it will expand. The expanded text will have instructions on what to do, this one is nice cause it comes with pictures.

Here is exactly what you need to copy from the picture and replicate on your own maprunner plugin:

GvIyElP.jpg


Being more aware, and taking the time to read things through and through (especially on the very first post, on the very first page) will take you far in your internet life~

Hope that helped.
 
Dotharlol said:
View attachment 216966

Hey after running like 4-5 Maps the bot stoped working...all he does now is picking/stashing Maps
Click to expand...

Many of us cant read german, but maybe someone that comes along that can may help.

The only thing I can recommend is to make sure that in the general tab, the box that says "stash tab for maps" is correctly labeled with what ever you stash tab is.
 
well the bot was doing maps before...map stash is still the same...he just sits at the stash picking up a map switching to all other stash tabs and places the map into the Map stash...than he repeats...(tried to ignore the map but didnt help at all he just picks another rune and does the same)
 
i rolled bunch of rare maps last night for bot to use but he hardly used any, he just rolled maps that he found. Is there a way of telling bot to run only those maps that i provided ? but still stash maps that he finds if possible
 
Dotharlol said:
well the bot was doing maps before...map stash is still the same...he just sits at the stash picking up a map switching to all other stash tabs and places the map into the Map stash...than he repeats...(tried to ignore the map but didnt help at all he just picks another rune and does the same)
Click to expand...

same problem happened here

iv been botting all night no problem, woke up this morning, sorted out my stash added some maps into inventory (disabled pick up map in items filter) so that my bot only runs map that i provided. Dont know if that could have caused problem ???

Set bot to run and all he did is picked up map switched tabs and put it back into inventory and repeat. (in the log it said could not find requered map or something along those lines)

I stopped bot and removed that specific map the ran again its its fine but i left to work now so i dont know if hes gonna run more maps or not. If hes just gonna keep doing same shit for 5 hours it will be probably begging to get banned xD I hope bot will stop or crash or something if that happens
 
Last edited:
imNoTYOURbuddy said:
same problem happened here

iv been botting all night no problem, woke up this morning, sorted out my stash added some maps into inventory (disabled pick up map in items filter) so that my bot only runs map that i provided. Dont know if that could have caused problem ???

Set bot to run and all he did is picked up map switched tabs and put it back into inventory and repeat. (in the log it said could not find requered map or something along those lines)

I stopped bot and removed that specific map the ran again its its fine but i left to work now so i dont know if hes gonna run more maps or not. If hes just gonna keep doing same shit for 5 hours it will be probably begging to get banned xD I hope bot will stop or crash or something if that happens
Click to expand...

Same thing happened to me a few times, there are a few things you need to make 100% sure you have enabled tho:

-Should have several maps, the more maps you have the safer you are to not "run out", especially if you have your bot set to explore X% of a map before completion.
-Be sure the map level is set high-ish, this means you character should be able to efficiently and effective handle these upper level maps (I have it set to 85).
-Don't set your map sell level ridiculously high, if it eventually gets to a point where its out of maps within your specified level range, its probably because its selling them (which is 3 of the same kind) to get one higher level one, this can happen faster than they drop in maps. (mine is set to level 70 [which saves a fk load of maps], its a bot... its supposed to farm, not push for record clears)
-Don't set your min map keep limit too high, if you have it set to anything higher than 6-7, that can also have a roll to play in running out faster.
-Don't have an obscene amount of map ignoring rules set, this pretty much just further chokes your bot more for maps. (I have literally just Punishing and boss room ignores on mine) The other things like vulnerability and what not are only a real threat to most characters that are decently geared and higher than level 75-ish if its a high end map like level 10+.
-Make sure you don't have your bot set to upgrade to magic or rare if you know that most of the mods together will absolutly destroy your character, this just makes you blow through maps faster than you are getting them.
-Running unIDed maps can also save maps and lengthen the time to pick up more.
-lastly... and obviously... make sure you have the right tab selected for maps.

Anyway, all this has a roll to play in "could not find required map"

of course I could just be wrong and this might be a common bug right now...
 
Zaxxon2009 said:
Tried that, it worked at first! Bot picked a map, ran it a while, but when porting to sell and putting stuff in chest, it started to bug around again!

/Z
Click to expand...

Yeap this is a common problem, just gotta wait for the reason why to be explained to us from someone that can read error messages.
 
sxowe said:
Yeap this is a common problem, just gotta wait for the reason why to be explained to us from someone that can read error messages.
Click to expand...

Not sure if it's related or not, but I solved something similar on my end. I run upgrade to magic, and it would revert it to normal every once in awhile. After reading the log, i found out that it was reverting when trying to re-roll a banned affix, because i didn't have any alts in a non-currency stash tab. I had moved transmutes and augs, but didn't move any alts. Soon as I did that, the issue never occurred again.

Hope this helps someone.
 
Hello! I would like to ask, does anyone have the issue that the bot only runs the map levels that are stated in "Max map level", but not maps whos levels are below that value? I seem to find that if i were to set it to say, "68", only maps that are level 68 are run, even if I have maps that are lower level than that.
 
Status
Not open for further replies.
Back
Top