[PAID] Oracle II - Premium [All in One]

[wulf]

Thanks alot for the Tips Mnipper!

If possible, I want to build Holy Power without Flash Light, just using HR with 1 stack of Selfless Healer, HS and Judgment.

I turned off all settings for Flash Light and CR still casting Flash Light. I setup HR to cast with 98 and 1 target, but Oracle2 isn't casting HR. What settings I must change to do this "rotation"?

Thanks!

You should also make sure that you set General > "Maximum AoE Health Percent" to 100 when going for a more static rotation, it will always attempt to cast HR then and not wait for someone to be below 99% as per the defaults.

 

[xaooax]

25 man Paladin Self less healer heroic settings for you to try.

Do you know what glyphs/talents go with that? im 570 and im gonna give it a whirl.

 

[mnipper]

Do you know what glyphs/talents go with that? im 570 and im gonna give it a whirl.

TALENTS: Speed of Light, Fist of Justice, Selfless Healer, Clemency, Holy Avenger, Holy Prism
GLYPHS: Beacon of Light, Hand of Sacrifice, and Illumination(this glyph is broken, as it no longer is penalizing you the "Holy Insight returns 10% less mana")

Enjoy and post your results. Would love to hear how other pallies are making out with the routine!

 

[aiming]

I really would like to hear what the best general settings are. will try the pala settings with my 573 holy.

 

[zeldrak]

Oh, I'm happy to see that resto shaman are getting some love. Any possibility of some settings that would be beneficial to ilvls 500-520? There are currently no working shaman settings in the folder, and that makes me sad because I *think* I'm most fond of my resto shaman. I've tried HPally and Disc Priest along with my resto shaman. The only thing left for me to try is my resto druid.

However, since I know nothing about these healing classes, when I read over all the settings I feel so overwhelmed and lost. I tried setting up my resto shaman by myself, but I don't think I really did a very good job as I'm going OOM during boss fights, and during trash I'm barely losing any mana at all. I have roughly 12,200 spirit, I use Telluric Currents, and I have the Mana Tide Totem, but I still OOM during a boss fight that lasts more than a few minutes. My healing done isn't very high either, so I have no clue what I'm doing wrong. In the three raids I ran tonight, I came in at #2 twice, and #5 once.

Oracle II is running really well though. I'm really liking it.

 

[wulf]

Oh, I'm happy to see that resto shaman are getting some love. Any possibility of some settings that would be beneficial to ilvls 500-520? There are currently no working shaman settings in the folder, and that makes me sad because I *think* I'm most fond of my resto shaman. I've tried HPally and Disc Priest along with my resto shaman. The only thing left for me to try is my resto druid.

However, since I know nothing about these healing classes, when I read over all the settings I feel so overwhelmed and lost. I tried setting up my resto shaman by myself, but I don't think I really did a very good job as I'm going OOM during boss fights, and during trash I'm barely losing any mana at all. I have roughly 12,200 spirit, I use Telluric Currents, and I have the Mana Tide Totem, but I still OOM during a boss fight that lasts more than a few minutes. My healing done isn't very high either, so I have no clue what I'm doing wrong. In the three raids I ran tonight, I came in at #2 twice, and #5 once.

Oracle II is running really well though. I'm really liking it.

Shaman will be getting a lot of love this weekend. Much testing and hopefully the defaults will be changed, they can definitely be better!

 

[zeldrak]

Shaman will be getting a lot of love this weekend. Much testing and hopefully the defaults will be changed, they can definitely be better!

Definitely looking forward to it. For some reason, I've always been partial to my shaman, even though I've rolled druid, priest, and paladin as healers. I do float between all of them though. The one I'm not very fond of right now is priest, but that's probably because my gear doesn't allow for very high mana regen since it's not even 490 yet. The rest of the classes are working out great though from what I've played.

 

[D4rkx]

Yesterday tested the new update on Galakras & Iron Juggernaut HC + Shaman NHC & Nazgrim HC, i don't what i do wrong but it seems that der CR don't want to heal or to smite. The Toon has an 572 ITMLVL and with Oracle II i had an output off 50-60 K HPS that's not much with that gear. King WoW gives me an Output of 180 K HPs on such fights. But I don't think it is the CR by it self. Could it be miss management of my settings? or should i reinstall Net Framework & c++ distributions?

 

[marcoman]

I also have a lot of problems with mine Disc Priest im not that geared, have 520ilvl gear but ppl are dying in HC Dungeon with dungeonbuddy... it wont rez dead ppl, stands in place a lot and wont move sometimes, had to leave couple of Dungeon and LFR. Dont know if its some settings wrong, or dungeonbuddy wont work good with disc priest. I dont have problems running as shadow... I will Try today couple of dungeon and post some logs.

 

[zeldrak]

Any idea why the store is showing that I purchased Oracle II twice? I have a screenshot of it, and this is even after clearing my cache and restarting my PC, then reloading the website three times. I looked at my bank account but I only see one pending charge for Oracle II.

Edit: I also posted a ticket to the BuddyStore support site, so either way it will be taken care of if something has gone wrong. Just keep in mind though that I do NOT want a refund for my original purchase. I love O2 and want to keep it. I know if I took a refund I would never be able to purchase it again. So, whatever needs to be done short of refunding my original purchase.

 

[Ruinit]

I also have a lot of problems with mine Disc Priest im not that geared, have 520ilvl gear but ppl are dying in HC Dungeon with dungeonbuddy... it wont rez dead ppl, stands in place a lot and wont move sometimes, had to leave couple of Dungeon and LFR. Dont know if its some settings wrong, or dungeonbuddy wont work good with disc priest. I dont have problems running as shadow... I will Try today couple of dungeon and post some logs.

Without seeing your setting for DB, do you have combat movement on in DB? Also O2 will not rez. Not designed to. Not saying Wulf won't add it but rezzing lazy people is not a cr priority imo.

 

[wulf]

Just an update, have made some good progress and am hoping to get the changes beta tested ASAP so i can push a release.

Lot of work on Shaman, and as a consequence some fixes that affect all classes.

Unfortunately the beta compiler on the Honorbuddy store keeps spewing errors and is affecting a lot of other developers as well.

I just wish i could get these improvements to you guys sooner. Stay tuned.

Wulf.

 

[Lazius]

hello i m new in healing work, can someone tell me, in this time is oracle good for disci priest pve, how is the stand, can i raid lfr and normal with this routine? pls excuse my english

 

[jake-]

hello i m new in healing work, can someone tell me, in this time is oracle good for disci priest pve, how is the stand, can i raid lfr and normal with this routine? pls excuse my english

Wulf needs a little time for the fine tuning. But I'm sure it will be fine for raiding in a few days

 

[bennyquest]

hello i m new in healing work, can someone tell me, in this time is oracle good for disci priest pve, how is the stand, can i raid lfr and normal with this routine? pls excuse my english

Yes you can use it for heroic as well. I currently raid Heroic content using the disc routine and do exceptionally well.

Wulf needs a little time for the fine tuning. But I'm sure it will be fine for raiding in a few days

No the Disc portion of the routine is performing extremely well. Some minor adjustments that can more than likely be done by settings.

All's well that Heals well,
Bennyquest

 

[Jggrnght]

No the Disc portion of the routine is performing extremely well. Some minor adjustments that can more than likely be done by settings.

All's well that Heals well,
Bennyquest

If this is true then something is wrong with mine kingwow is healing ALOT more than this routine for me im 550 ilvl and doing less healing than ppl with lower ilvl's

 

[bennyquest]

No the Disc portion of the routine is performing extremely well. Some minor adjustments that can more than likely be done by settings.

All's well that Heals well,
Bennyquest

If this is true then something is wrong with mine kingwow is healing ALOT more than this routine for me im 550 ilvl and doing less healing than ppl with lower ilvl's

Then you have poor settings, or have turned something really weird on. Delete your settings folder for O2 and load the defaults try that at first then upload a log so i can see what your setting are.

All's well that Heals well,
Bennyquest

 

[wulf]

Update Release 4.4.4.1

Waiting for approval by Honorbuddy Staff

*Note: This update requires you to delete your Honorbuddy\Settings\OracleII folder! - I know not again

This revision includes our paladin beta testers Selfless healer settings. 25Man_PaladinHoly_Class_SelflessHealer_560ilvl

Shaman has had a lot of love, especially with performance. Other general code tidy ups and bugs have been fixed this release. Enjoy.

• [Priest] Added "Dark Intent" to Power Word: Fortitude exclusions.
• [Priest] Added combat check to Hymn of Hope.
• [CooldownTracker] Fixed some errors that will effect most classes that were waiting on cooldowns, like healing rain for shaman.
• [All Ground Heals] Fixed a bug that would slow the speed at which Healing Rain and Wild mushrrom would be cast.
• [Shaman] Fixed Spirit Link Totem it was broken to hell.
• [Paladin] Improved Judgement for Selfless healer
• [Shaman] Speed up Healing Rain casting on largest cluster
• [Druid] Speed up Effo Mushroom on largest cluster

 

[nobelchrisi]

use this cc the corrct way too play dizi? i mean did he smite? cause thats the most heal for a dizi...

 

[fordjetta]

oracle v1 is better then V2 yesterday ive tested it on 25man HC and i put some settings like v1 in v2 but it was not the same something is missing in v2 im figgering out what