[PAID] Oracle II - Premium [All in One]

[Nephastus]

How well do these do in arenas? I trialed the druid some, and I noticed I had to fight with it in regards to movement a lot. Was I just not doing something right? Something enabled that shouldn't have been enabled?

 

[Jggrnght]

Anyone got a good disc priests saved settings i tried it on my priest and it spent most the fight casting greater heal

 

[macaw2000]

The HPS throughput for Disc Priest has been terrible with this routine. Using KingHeal I averaged 115kHPS through a SOO clear last week and using Oracle II I did a measly 52kHPS this week.

What I'm noticing is that it tries to smite/penance attack instead of prioritizing much needed heals. Prayer of Healing is badly underused and when someone is low-health, it doesn't stop the smite cast even if it means a party death.

I'd love to see this thing work better but in the meantime, I'd suggest not advertising this as supporting Disc Priest. It's actually pulling less HPS than Singular right now...

 

[macaw2000]

Anyone got a good disc priests saved settings i tried it on my priest and it spent most the fight casting greater heal

I spent about 90 minutes messing with them today and still have bad results. I am going to have to shelve this routine until they support Disc Priest.

 

[wulf]

I spent about 90 minutes messing with them today and still have bad results. I am going to have to shelve this routine until they support Disc Priest.

Sorry you are having issues because I can assure you disc is far from terrible. Two heroic disc priest testers have beta tested oracle II and have no issue using it with their HC clears.

Shoot me your Skype and I'll try and see where you have gone wrong.

It's most likely you have some old settings laying around.

Wulf

 

[D4rkx]

Same here, bought it few days ago, run it on disc. priest and had bad results too. KingWoW heals Norushen HC with 300 k HPS on my disc and oracle 2 still do 80-100 k. Can some one share settings over pm with me ?THX a lot!

 

[akaInsidious]

Same here, bought it few days ago, run it on disc. priest and had bad results too. KingWoW heals Norushen HC with 300 k HPS on my disc and oracle 2 still do 80-100 k. Can some one share settings over pm with me ?THX a lot!

I've had great results with KingWoW and oracle II. I just don't heal TONS like everyone else that bots in raids... you can tell :2

Edit: I'm disc priest.

 

[wulf]

Update Release 4.1.5.4

Is now Live!

*Note: This update requires you to delete your Honorbuddy\Settings\OracleII folder! - This is due to the default settings being changed to a few classes

• [Shaman] Added LoS check to ES.
• [Shaman] Healing stream totem can be now used in two ways. For single target (has a Health Percent setting and an enable setting) or by adding it to the Dynamic spell priority and specifying an average healthpercent of the nearby players and a count of players to use it. (all new setting added.)
• [Shaman] Addition of EarthShield on second tank. Setting renamed under class specific to "Earth Shield target"
• [All] Some Performance improvements to LoS checks.
  [*][Priest] Discipline settings Changed from Default Settings to be more in line with Disc beta testers.
• [Paladin] Addition of Lights Hammer for Ground Heal Location target. Has a setting to enable/disable in class specific (this will enable you to build Shields)
• [Paladin] Removed Enable HP Gen with HR under Beacon of light as it does not generate a HP.

Ok, I haven't been able to get hold of Oracles Discipline testers so I have changed the default Discipline settings to what I think they should be. They will give you a good base to work from.
What you have to understand is that its very hard to apply default settings that will cover all specialisations and custom builds. It has to be generic because i cover all talents.

Dont forget to delete your settings and see how you go with these ones. I will be adding the Beta testers class settings as they approve them.

Wulf.

 

[akaInsidious]

Update Release 4.1.5.4

Waiting for approval by Honorbuddy Staff

*Note: This update requires you to delete your Honorbuddy\Settings\OracleII folder! - This is due to the default settings being changed to a few classes

• [Shaman] Added LoS check to ES.
• [Shaman] Healing stream totem can be now used in two ways. For single target (has a Health Percent setting and an enable setting) or by adding it to the Dynamic spell priority and specifying an average healthpercent of the nearby players and a count of players to use it. (all new setting added.)
• [Shaman] Addition of EarthShield on second tank. Setting renamed under class specific to "Earth Shield target"
• [All] Some Performance improvements to LoS checks.
  [*][Priest] Discipline settings Changed from Default Settings to be more in line with Disc beta testers.
• [Paladin] Addition of Lights Hammer for Ground Heal Location target. Has a setting to enable/disable in class specific (this will enable you to build Shields)
• [Paladin] Removed Enable HP Gen with HR under Beacon of light as it does not generate a HP.

Ok, I haven't been able to get hold of Oracles Discipline testers so I have changed the default Discipline settings to what I think they should be. They will give you a good base to work from.
What you have to understand is that its very hard to apply default settings that will cover all specialisations and custom builds. It has to be generic because i cover all talents.

Dont forget to delete your settings and see how you go with these ones. I will be adding the Beta testers class settings as they approve them.

Wulf.

I'll be testing the update ASAP

 

[bennyquest]

Anyone got a good disc priests saved settings i tried it on my priest and it spent most the fight casting greater heal

The HPS throughput for Disc Priest has been terrible with this routine. Using KingHeal I averaged 115kHPS through a SOO clear last week and using Oracle II I did a measly 52kHPS this week.

What I'm noticing is that it tries to smite/penance attack instead of prioritizing much needed heals. Prayer of Healing is badly underused and when someone is low-health, it doesn't stop the smite cast even if it means a party death.

I'd love to see this thing work better but in the meantime, I'd suggest not advertising this as supporting Disc Priest. It's actually pulling less HPS than Singular right now...

I spent about 90 minutes messing with them today and still have bad results. I am going to have to shelve this routine until they support Disc Priest.

I've had great results with KingWoW and oracle II. I just don't heal TONS like everyone else that bots in raids... you can tell :2

Edit: I'm disc priest.

I just tested the new default setting wulf put in for Disc priest...I believe I changed two things and will get them to him....i ranked top 20 in almost every LFR fight i did from beginning of SoO to end. No, you will not be able to check and find me I have it hidden. But I can assure you this Heals remarkably well on Disc.

All's well that Heals well,
Bennyquest

 

[bata]

Sorry noob question here but is there meant to be custom settings for all classes?

I'm playing a holy priest PVE but dont see any settings for it only DISC am i just meant to use Default_General?

Also whats the difference between the custom settings of General and Class profiles?

Sorry if its been noted down before i could not find anything.

 

[wulf]

Sorry noob question here but is there meant to be custom settings for all classes?

I'm playing a holy priest PVE but dont see any settings for it only DISC am i just meant to use Default_General?

Also whats the difference between the custom settings of General and Class profiles?

Sorry if its been noted down before i could not find anything.

Hi at this stage no one should be using custom settings as they may break the routine. We are in the process of adding class and context specific settings.

Oracle has two types of settings, General Settings (in the General tab) which contain routine specific settings and ClassSpecific settings (in the ClassSpecific tab) which contains settings relating to your current class.

When you import or export you are given the choice of which settings you want to work with.

 

[grims]

Is there any guide how to setup pvp priest in arena with oracle 2? i'm new to this routine and dont know much so help would be much appreciated

 

[bennyquest]

Is there any guide how to setup pvp priest in arena with oracle 2? i'm new to this routine and dont know much so help would be much appreciated

As the routine has only been open to public for about 3 weeks now, We are still trying to get a lot of bugs we did not forsee knocked out of the routine. We have testers working on PVP stuff as well as us getting more PVP functionality in the routine. In the next week or so we should definitely have some default settings for PvP available with the routine.

 

[lckwjl]

Priest Talent:
Mindbender not being cast on cd most times.
Have talent, have no mana, and target is above hp threshold to use pet for mana, but no cast/really late cast.

 

[wulf]

Priest Talent:
Mindbender not being cast on cd most times.
Have talent, have no mana, and target is above hp threshold to use pet for mana, but no cast/really late cast.

Hi, could be many reasons for this but does the tank have a target? do you have an enemy on focus? are you targeting an enemy? If one of these things are correct then it should be cast on cooldown. Thanks for the ticket,we will look into it.

 

[wulf]

Is there any guide how to setup pvp priest in arena with oracle 2? i'm new to this routine and dont know much so help would be much appreciated

Hi, I was testing with the settings attached to this post, now i'm not a PvP Guru but these settings should give you something to work with.

To import the "PvP_PriestHoly_Class" file, Click "Class Config" > "Import Settings" > "Class Settings" and locate the file (make sure you Unzipped it first!). Click "Save & Close"

To import the "PvP_PriestHoly_General", Click "Class Config" > "Import Settings" > "General Settings" and locate the file (make sure you Unzipped it first!). Click "Save & Close"

 

[wulf]

Hi All,

Our heroic Paladin Tester has submitted these Selfless Healer settings for your approval.

To import them, Click "Class Config" > "Import Settings" > "Class Settings" and locate the file (make sure you Unzipped it first!). Click "Save & Close"

Let me know how it goes!

Wulf.

 

[zeldrak]

Hi All,

Our heroic Paladin Tester has submitted these Selfless Healer settings for your approval.

To import them, Click "Class Config" > "Import Settings" > "Class Settings" and locate the file (make sure you Unzipped it first!). Click "Save & Close"

Let me know how it goes!

Wulf.

This isn't working because it's a text file and not an XML file. I can see it's unzipped to the folder I chose, but the routine can't see it when I try to import settings. All I can choose are XML files, but the files are of a .txt file type.

 

[wulf]

This isn't working because it's a text file and not an XML file. I can see it's unzipped to the folder I chose, but the routine can't see it when I try to import settings. All I can choose are XML files, but the files are of a .txt file type.

Apologies, was in a rush this morning, change the file extension to .xml so it will be mysettings.xml