MultiZone - The Ultimate Mining/Herb Profile

[nate8282]

I think i'll just make 2 serparate profiles, having a true/false for that would be very complicated.

 

[nate8282]

Love the profile! Had to add just a couple of blacklisted nodes as every time it kept going to one in the middle of a pack of 8 - 10 mobs and got stuck in a death cycle.

Other than that, the mega-route is the profile, best I've used so far. Over 5 hours the average comes out at 140 nodes per hour (herb only) on a med / high pop server.

Also recommend getting Mist-Piercing Goggles to increase the output.

Thanks, if you give me the blackspots i can add them to the official megaroute for Pandaria.

 

[Starskream]

Thanks, if you give me the blackspots i can add them to the official megaroute for Pandaria.

This one is the death-cycle one (for me atleast, may not be for others)

<Blackspot Z="299.6958" Y="2588.999" X="1091.915" Radius="60"/>

This one it does blacklist after 20 secs, however it does keep trying to go back to it on every trip round.

[Gatherbuddy2]: Approaching "Fool's Cap" at X="648.8177" Y="4175.53" Z="208.7872"

Will update with more if / when i find any.

 

[Joen]

Im having some problems in Pandaria.
I used this bot to level up my mining 1-600 (Btw worked awesome, ty) but directly after reaching level 600 it stopped.
Is it supposed to do this ?
And is it possible to use the bot even after reaching 600?

 

[nate8282]

This is a profile, when you say this bot are you referring to Professionbuddy? If you used the leveling profile that comes with PB then yes, it stops after you hit 600. Make sure you select my profile Multizone and then set it up using the instructions on the first post.

 

[nate8282]

This one is the death-cycle one (for me atleast, may not be for others)


This one it does blacklist after 20 secs, however it does keep trying to go back to it on every trip round.



Will update with more if / when i find any.

Thanks i need to go through that route for several more hours and test it for blackspots, i've only done it for about an hour. Blackspots updated.

 

[nate8282]

The last update with the blackspots was 3kb smaller than it should be, so i re-uploaded, must have grabbed the wrong copy.

I need to figure out how to setup an SVN.

 

[Starskream]

Found another potential death-cycle location

<Blackspot Z="312.0491" Y="2412.675" X="804.4236" Radius="60"/>

Make sure to check them out yourself though, may just be for me but this herb was in the middle a pack of 8 mobs.

Again, as and when i find blackspots i will keep you updated, ive ran this profile for 60+ hours now and so far these are the only ones i have come across.

 

[nate8282]

Found another potential death-cycle location



Make sure to check them out yourself though, may just be for me but this herb was in the middle a pack of 8 mobs.

Again, as and when i find blackspots i will keep you updated, ive ran this profile for 60+ hours now and so far these are the only ones i have come across.

Thanks again for the help. This profile was made for the community, i don't even use it myself, so it doesn't have as many blackspots as my previous profiles simply because i haven't used it for countless hours.

 

[Joen]

I meant that i was using you profile inside proffesionbuddy when i was leveling my mining.
But i cant manage to get the bot to start mining, he just uses the portal to Pandaria and runs around ignoring the ores ?!

 

[nate8282]

I meant that i was using you profile inside proffesionbuddy when i was leveling my mining.
But i cant manage to get the bot to start mining, he just uses the portal to Pandaria and runs around ignoring the ores ?!

Make sure you have Pandaria flying and the highest flying learned, I've had some have it not fly if they didn't have the fastest speed.

 

[Starskream]

Will keep you updated. Thanks again for the profile! Best herb one out there i have used.

<Blackspot X="910.1858" Y="2613.267" Z="287.7605" Radius = "60" />

 

[Crown]

since 1.8 its flawless for me running profiles : Northend, Outland, Classic, Pandaria, Uldum one stuck space in pandaria above those cave in the valley of the four winds.. but i cant seem to find where i can add blackspots.. i m just to stupid for it >.<

 

[Starskream]

since 1.8 its flawless for me running profiles : Northend, Outland, Classic, Pandaria, Uldum one stuck space in pandaria above those cave in the valley of the four winds.. but i cant seem to find where i can add blackspots.. i m just to stupid for it >.<

easiest way to do it would be to open the profile .xml, in there you will see a line of string like this

-<Blackspots>
<Blackspot Z="287.7605" Y="2613.267" X="910.1858" Radius="60"/>

Simply just copy and paste the co-ordinates from your honorbuddy window, for example:

[Gatherbuddy2]: Approaching "Silkweed" at X="245.474" Y="179.2379" Z="165.3857"

Then take the part "X=X-co-ord" Y="Y-co-ord" Z="Z-co-ord"
and make it into the line above it so it becomes

<Blackspot X="X-co-ord" Y="Y-co-ord" Z="Z-co-ord" Radius="60"/>

copy that anywhere between the code marked -<blackstpots> </Blackspots> and save the profile and you are all set to go.

 

[nate8282]

since 1.8 its flawless for me running profiles : Northend, Outland, Classic, Pandaria, Uldum one stuck space in pandaria above those cave in the valley of the four winds.. but i cant seem to find where i can add blackspots.. i m just to stupid for it >.<

if you would be easier for you, go to the spot where he gets stuck, check enhanced mode on the bot, click on developer tools on the bot, then doubleclick generate blackspot, it will paste a blackspot to your main bot window, copy that and give it to me and i'll add it to the profile.

 

[Crown]

if you would be easier for you, go to the spot where he gets stuck, check enhanced mode on the bot, click on developer tools on the bot, then doubleclick generate blackspot, it will paste a blackspot to your main bot window, copy that and give it to me and i'll add it to the profile.

yaaay

that is what i was looking for!

just couldn?t remember where those fucking blackspot button was


@ starskream

THX also !!

 

[Joen]

Working fantastic now! Thank you for the quick answers

 

[Arious13]

My bot keeps running to the bottom of krasarang wilds off the shore and dieing in fatigue. I even replaced all of the profiles that came with this and it still does it. Any idea?

 

[nate8282]

My bot keeps running to the bottom of krasarang wilds off the shore and dieing in fatigue. I even replaced all of the profiles that came with this and it still does it. Any idea?

make sure the bot is in Verbose mode instead of normal (tells you more what's going on), then let me know what it says. I haven't had that happen, the profile doesn't even have any coordinates in Krasarang, so it has no reason to go there. Do you have an old computer? it could be so slow that it still thinks its in org after it uses the portal.

 

[saltychip]

does this profile just run around the whole zone of pandaria or stick to the specific zone you are in. My iLevel sucks and dread wastes is owning me past 2+mobs.