[PAID] [Mage] Portal - An Advanced Honorbuddy Mage Routine [PvE/PvP]

[thejourney]

Hey - Can you post a full, unedited log file please? That file is missing all of the important stuff at the beginning

For combustion, I'm swaying towards thinking the 'above average' setting is best at the moment (unless using specific set values - which is a little more advanced).

Hmm not sure how anything got cut off, let me try again - log attached. Again this is training dummies, where it really gets bad is during a raid when other people are casting (FPS drops to 10-15).

 

[Kordd]

Maybe I'm just an idiot and cant find it, but is there an option for a pause hotkey? Primarily for fights like twins or hanz & franz with interrupt abilities, but would be nice to pause at will.

 

[Kordd]

Blink hotkey would be nice too

 

[getmunch]

Maybe I'm just an idiot and cant find it, but is there an option for a pause hotkey? Primarily for fights like twins or hanz & franz with interrupt abilities, but would be nice to pause at will.

Alt+x is enyo defualt pause key.....not sure what bot base your using but i think they all have a pause key.

Also im pretty sure if your targeting the mob casting the interupt it has built in logic to make sure your not casting.

 

[Millz]

why does this not move away when solo? It literally tanks mobs... what a waste.

i guess this is for raid rotation mainly/only? Trying t o use it to farm and elites simply rape you dead lol. Surprisingly enough singular works just fine on the same mobs that kill this.

It doesn't move around/kite as more often than not it ends up pulling more mobs which guarantee's your death. Any time the bot is running around trying to kite it's not DPSing.

Hmm not sure how anything got cut off, let me try again - log attached. Again this is training dummies, where it really gets bad is during a raid when other people are casting (FPS drops to 10-15).

There's nothing too obvious wrong in that log. There's an error which I need to fix, but shouldn't affect your FPS. You could maybe try reducing your TPS from 15 down to 10. Try lowering your graphics in game too and enabling vsync.

Maybe I'm just an idiot and cant find it, but is there an option for a pause hotkey? Primarily for fights like twins or hanz & franz with interrupt abilities, but would be nice to pause at will.

Pause is done via the bot base (enyo, lazyraider, raidbot). There's code in to handle stop casting on incoming interrupt - but you need to be targeting the unit that's going to interrupt you or it to trigger.

Blink hotkey would be nice too

Instant cast ability - no need to have a hotkey for it. If you're struggling to get the cast off, then in game make a macro to do....

/stopcasting
/cast blink

 

[dilbog]

Even with a macro Millz blink, ice block and invis have always been to hard to cast esp when moving away from target.

 

[Bizzle]

Is this CR still viable for arena? For me it seems the CR just smashing buttons like "Ice Nova" etc, and when I activate burst it just stands there and launch FBs.. So what up?

 

[lve2raft]

Even with a macro Millz blink, ice block and invis have always been to hard to cast esp when moving away from target.

this is true

 

[sakone54]

How is the optimization for the rotation for end game raiding for fire/arcane?

 

[chopper]

Supernova will not be cast correctly on arcane. I have to check automatic for it to even cast. And it does it off rip and does wait for PC. Im just curious if there is a way to reset portal to default. I don't know what happen cause it was working prior to 6.1.

 

[Millz]

Even with a macro Millz blink, ice block and invis have always been to hard to cast esp when moving away from target.

Manual cast detection can help with that - hotkeys add quite a lot of overhead to the CR, so for abilities that are instant cast I'd rather avoid adding them where possible.

Is this CR still viable for arena? For me it seems the CR just smashing buttons like "Ice Nova" etc, and when I activate burst it just stands there and launch FBs.. So what up?

There's no smashing keys - but you'd need to alter the settings to suit how you want the routine to run.

Burst -> You'll need to set abilities and cooldowns in the GUI to be used on burst enabled, then once you use the burst key it'll fire those abilities. Like Frozen Orb for instance.

How is the optimization for the rotation for end game raiding for fire/arcane?

Should be working pretty good.

Supernova will not be cast correctly on arcane. I have to check automatic for it to even cast. And it does it off rip and does wait for PC. Im just curious if there is a way to reset portal to default. I don't know what happen cause it was working prior to 6.1.

A fresh HB install would reset the settings - but you're best off just changing those settings in the GUI.

 

[dilbog]

Manual cast detection can help with that - hotkeys add quite a lot of overhead to the CR, so for abilities that are instant cast I'd rather avoid adding them where possible.

I understand but it has gotten a lot harder to get instant casts off in WoD to the point where I would say it is important to have these included. I can only speak for myself but I no longer use this routine for my main only on my alt mage because of this and a few other things. Maybe have a poll and see what the other users think.

 

[chopper]

I figured as much that was the case Millz but unfortunately that has not worked. I have reinstalled HB several time and yielded the same results. Frostnova (supernova) does not get cast at all. Only gets cast and incorrectly in priority when I check Use Auto. This has worked correctly before so I know that something is wrong. Please advise.

 

[Prince_Q8]

hi

i can't make UI Big to let me change some settings coz some box small ^^

also auto Focus not work and auto sheep
and when i take friendly target bot spam to cast it's not Good :/

ty

 

[Rekt]

Hey, for some reason it stopped casting supernova. I looked the bot settings and I can't find anything to fix this. Would you need me to post a log? Thanks!

 

[Marlboro_Reds]

I want to test this before purchase is trail over? also can someone post single target dps for me pls...and ilvl

 

[Millz]

I understand but it has gotten a lot harder to get instant casts off in WoD to the point where I would say it is important to have these included. I can only speak for myself but I no longer use this routine for my main only on my alt mage because of this and a few other things. Maybe have a poll and see what the other users think.

Hmm okay. I'll have a little think about what to do with it. Manual cast detection should be enough to get the cast off though.

I figured as much that was the case Millz but unfortunately that has not worked. I have reinstalled HB several time and yielded the same results. Frostnova (supernova) does not get cast at all. Only gets cast and incorrectly in priority when I check Use Auto. This has worked correctly before so I know that something is wrong. Please advise.

Can you post a log file please? Can't test it at the moment due to tripwire.

hi

i can't make UI Big to let me change some settings coz some box small ^^

also auto Focus not work and auto sheep
and when i take friendly target bot spam to cast it's not Good :/

ty

UI resize -> Can't be done yet. The font scaling sounds like it's off though. You can adjust this under windows appearance/accessibility options. There's plenty of guides via google which will help you adjust font size / font scaling.

Auto focus -> Only works in PvP.
Auto sheep -> Need a log file to see what's going on.

Friendly target -> Sounds like you've got auto targeting disabled. If auto targeting is disabled the bot just assumes your current target is good/valid and attacks it.

Hey, for some reason it stopped casting supernova. I looked the bot settings and I can't find anything to fix this. Would you need me to post a log? Thanks!

If you've got a log that would help. Can't test at the moment due to tripwire.

I want to test this before purchase is trail over? also can someone post single target dps for me pls...and ilvl

You can trial it via the buddy store for 48 hours. Trial option appears once you login to the store website.

 

[dilbog]

Millz congratulations on getting married best wishes to you and your soon to be wife.

 

[Millz]

Millz congratulations on getting married best wishes to you and your soon to be wife.

Cheers mate, much appreciated. 2 days to go!

 

[caspersky]

i dont see the 2p/T17 bounce trick is being used at all , or am i doing something wrong