What's new
By:
  • Visit Rebornbuddy
  • Visit Panda Profiles
  • Visit LLamamMagic
  • Visit Resources
  • Visit Downloads
  • Visit Portal
RebornBuddy Forums

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

[PAID] [Mage] Portal - An Advanced Honorbuddy Mage Routine [PvE/PvP]

I stopped the bot because the CR wouldn't start. Any help? KingWoW rota starts just fine but I prefer your CR millz
 

Attachments

Last edited:
Toko said:
Congratulations and best wishes.

A few important issues Ive found in Fire rotation:
-I just got my 2T and I noticed that the rotation is saving both Inferno Blast for combustion Trick on bosses that start on ST like Darmac or Thogar and that is a huge dps loss, plus is better to cast combustion manually on these so you do it when the adds are around.
As far as i know, Combustion trick should only be used in fights like Twins, Iron Maidens or if you have chosen PC as your talent.
So, could you mind add an option to enable or disable it like "the advanced fire rotation"?

-Fire Rotation:
Use Draenic Intellect Potion as your pre-pot
Precast Pyroblast to line up with the pull start
Cast Fireball until you get a Heating Up proc --> Sometimes, When i get Heating Up proc, the routine cast Fireball again instead of using Inferno blast. This may be a GCD problem?
Cast Inferno Blast to generate a Pyroblast proc
Cast Fireball until you get another Heating Up proc --> Same as above
Cast Pyroblast
Use any remaining Pyroblast procs --> The routine is skipping this part
Click to expand...


Hey buddy - welcome back!! This post was good for some of the things the routine does seem to be struggling with. Hope you had a great trip!
 
Last edited:
either my expectations are wayyy to high due to using Vitalic's elite rogue for a pvp routine, or this bot is just bad for arenas. Can someone post how to setup the pvp or a video on how to set it up..
 
I am getting interrupted on hans and franz, it is no longer stopping cast during the disrupting shout.



Also, the DPS is really bad on hans and franz. I'm using the "combust above average" option and its 10-15k below other mages. Any idea why? Same log from above.
 
Toko said:
Congratulations and best wishes.

A few important issues Ive found in Fire rotation:
-I just got my 2T and I noticed that the rotation is saving both Inferno Blast for combustion Trick on bosses that start on ST like Darmac or Thogar and that is a huge dps loss, plus is better to cast combustion manually on these so you do it when the adds are around.
As far as i know, Combustion trick should only be used in fights like Twins, Iron Maidens or if you have chosen PC as your talent.
So, could you mind add an option to enable or disable it like "the advanced fire rotation"?

-Fire Rotation:
Use Draenic Intellect Potion as your pre-pot
Precast Pyroblast to line up with the pull start
Cast Fireball until you get a Heating Up proc --> Sometimes, When i get Heating Up proc, the routine cast Fireball again instead of using Inferno blast. This may be a GCD problem?
Cast Inferno Blast to generate a Pyroblast proc
Cast Fireball until you get another Heating Up proc --> Same as above
Cast Pyroblast
Use any remaining Pyroblast procs --> The routine is skipping this part
Click to expand...
this needs to be fixed asap...
 
I don't know if you need a log but I found a bug. I needed to cast amp magic by hand tonight and I turned it off in the settings but it didn't stop casting it until I had closed and re-opened HB.
 
Haart said:
Here is my log file. I checked frost mage guide on Method website, seems everything is ok with rotation.

View attachment 173744
Click to expand...

Try not using burst hotkey. It's not ideal for PvE - aimed more at PvP.

lokuri said:
I stopped the bot because the CR wouldn't start. Any help? KingWoW rota starts just fine but I prefer your CR millz
Click to expand...

Enable Framelock :)

Code: 
[Portal] Framelock is NOT active! Please enable within the Settings & Tools dialog.

montek916 said:
either my expectations are wayyy to high due to using Vitalic's elite rogue for a pvp routine, or this bot is just bad for arenas. Can someone post how to setup the pvp or a video on how to set it up..
Click to expand...

Vitalic's is very much 1 click -> go. Mages need a lot of hotkey control for polymorphing/crowd control etc.

thejourney said:
I am getting interrupted on hans and franz, it is no longer stopping cast during the disrupting shout.

Also, the DPS is really bad on hans and franz. I'm using the "combust above average" option and its 10-15k below other mages. Any idea why? Same log from above.
Click to expand...

You need to be targeting Franz for the cancel cast to work. It has worked a couple of times in your log. If targeting Hans it doesn't work.

Combustion is difficult to get right. I'm adding another option in the next build to use it when X units in range and above average, which means you'll be able to combust more than 1 unit at a time (great for fights like hans/franz).

Nokkiepoo said:
So yeah, the fire rotation isn't even using meteor, or combustion. It doesn't even use meteor on aoe, and I have use meteor selected. Going to upload logs shortly.View attachment 173802
Click to expand...

Can you post a full, unedited log file please? There's lots of important info missing from the start of that log.
 
Fireworrks said:
I don't know if you need a log but I found a bug. I needed to cast amp magic by hand tonight and I turned it off in the settings but it didn't stop casting it until I had closed and re-opened HB.
Click to expand...

Can you post a log file please?

Ref: How To Attach a Log

naNa47192 said:
please share with me a profile for arenas...!
Click to expand...

You need to set the routine up to work how you want it to work. What I want the routine to control for me may be completely different to what you want the routine to do. While it would be nice to be able to provide a settings file that has perfect settings - if that was the case I wouldn't need to add settings to the routine in the first place. Spend 10-15mins looking through the GUI and set it up. I know it's not very fun having to set it up, but it's going to give you the best results in the long run.
 
Can I use enyo's softlock? I used to be able to run with it. It doesn't work anymore though. Hard framelock makes WoW go at 15-20fps even when I set it at 45-60tps.I have a pretty good machine aswell
.
 
Could someone please link or share any profiles that you have made for BRF (Heroic and Mythic) Please it would be very very helpfull!

Thanks,

Aramis
 
Hello Millz! Welcome back! Can you explain a comustion trick in your CR? it work with all Combustion option enable or only with "above 90%"? TY
 
Millz - can we have a hotkey or something for t17 two piece trick on or off? On Mythic Flamebender we need to save combustion for wolves but if combustion is OFF CD then it doesn't use inferno blast at all = huge dps loss.

Also - can you check this log? Last fight in the log - held on to inferno blast two stacks for a long time and didn't do anything?
 

Attachments

Last edited:
Thanks for adding the overlay Millz, But could you make it the same size as enyo please I cant see it most of the time :)
 
You must log in or register to reply here.
Back
Top