What's new
  • Visit Rebornbuddy
  • Visit Panda Profiles
  • Visit LLamamMagic
  • Visit Resources
  • Visit Downloads
  • Visit Portal

Kick's Mega Profile Packs 1-90

Status
Not open for further replies.
View attachment 102318

Type:Questing
Faction:Horde
Area:Classic
Zone:Ashenvale
Quest:Before You Go

Description: I left the bot on for 8 hours while I went out to eat. I come home to find out he is still level 26. The bot is just pacing back and forth it seems. In the log it says it got stuck, but I did not witness it. It's in the correct area to collect the (5) Venison Steaks, however is not attacking the mobs at all. If you need more description, please inbox me. I'd like to help and get it resolved the best that I can.

Thanks in advance Kick. Hope this is the right area to post this :o

Hi Botter9000,

This is a known HBcore bug that should be repaired in the next release.

You got lucky this time, as this problem has been encountered by several others, and as a consequence we recogonized the issue. Next time, please provide a full unedited log, or we will be unable to assist you.

cheers,
chinajade
 
There's a problem when my character gets to the quest "Glowcap Mushrooms" in Zangarmarsh at Sporeggar.
It continuously tries to pick up the quest, even though it's not there. After a bit of research I found out the quest disappears after reaching friendly with the Sporeggar reputation, which the bot did on it's own.

I've attached logs that show it trying to pick up the quest for around 8 minutes before I stopped it and levelled to 66 myself to get it to start in Nagrand. (The problems between about 04:09 to 04:17)
View attachment 102319


Hi, Shaak,

THANK you very much for this!

In v2701, we've adjusted the profile such that the PickUp for the quest is not attempted if you are friendly or better with Sporeggar!

cheers & many thanks again,
chinajade


[size=-2]Ref: Shaak's original post[/size]
 
the bot was questing in the grizzly hills, using your profiles, when all of the sudden the bot stops. so i start the bot by hitting the "start" button again and now he just keep trying to pick up quest "Vordrassil's Fall", but can't since he finished the quest earlier already. so he keep opening the dialog window with the npc and close it again.

what can i do now to make him continue questing?

Hi, Thang78,

Important information is missing from your log file. If you'd like to attach the full log, we'll give it a look.

cheers,
chinajade
 
Zone: Nagrand
Quest: [Ruthless Cunning]

What should happen: Bot plants a flag on dead targets

What happens: It tries to plant a flag on targets with flags already on them that other players have planted with.

Log can be provided if needed.



[EDITED 25-Aug-2013 by chinajade]: Thanks again, Lilsavalex.
Testbed required. Repairing this issue will require us getting a toon back out to that quest to see if there's a way to determine which mobs are eligible for the flag, and which are not.
 
Hi, Shaak,

THANK you very much for this!

In v2701, we've adjusted the profile such that the PickUp for the quest is not attempted if you are friendly or better with Sporeggar!

cheers & many thanks again,
chinajade


[size=-2]Ref: Shaak's original post[/size]

I have the updated files, I've cleared the cache, but I'm still having this same issue. I've even leveled to 66 to get past this quest, but it still goes here.

Log:View attachment 19244 2013-08-25 14.21.txt



[EDITED 30-Aug-2013 by chinajade]: Thanks for the fresh log, Kaeyn.
Sadly, we'll have to get a testbed out to this quest to determine what is going wrong. In the meantime, your only work-around is to comment out the offending PickUp. VERY sorry!
 
Found two bugs with one line:

<!--<PickUp QuestName="Help for Mudsprocket" QuestId="11211" GiverName="Nazeer Bloodpike" GiverId="4791" />-->

I had to comment it out because it was causing a hangup.

Firstly this is under a levelgate of 36 but this quest requires 39. Also, it had the incorrect giverID set. I've put in the giverID from wowhead. It should pick up from nazeer but it had the giverID of tabetha. I wasn't sure how to fix it to force it to go after 39, so I just commented it out, it seems like it wont matter because I dont think that quest is a pre-req for anything.

Commenting it out caused a problem only because there is a step to turn it in that broke as well. I had to comment out that line as well. No biggie.
 
Zone: Dragonblight
Quest: [Marked for Death: High Cultist Zangus]

What should happen: Bot enters The Pit of Narjun, finds the High Cultist Zangus and loots the head.

What happens: Bot goes to the outside of the Pit of Narjun, targets the High Cultist Zangus, stops targeting him and stays out side the pit for nothing.



[EDIT 30-Aug-2013 by chinajade]: Thanks again Lilsavalex!
Not sure why Honorbuddy is not pursing the <Objective> as shown in the log...
[07:21:14.420 D] Goal: Goal: Collect Head of High Cultist Zangus x 1
Will need to get a testbed to location to work the issue.
 

Attachments

bot (horde-DK) had the 73 level and made the quests in Dragonblight but after updating SVN back to Borean Tundra and began to make low lvl quests. WHY? please return it was!

Open up either [Fly][A - Quest] LK 68-80 [Kick] or [Fly][H - Quest] LK 68-80 [Kick] with a text editor,Ctrl+F checkpoint to find <QuestOrder IgnoreCheckPoints="true"> and set it to <QuestOrder IgnoreCheckPoints="false">.

That should take care of it!
 
After updating (both bot and Kicks) my bot has stopped using mount, Its currently running the [Fly][N - Quest] Uldum 83-85 [Kick] profile, unfortunetly I cannot atm change it to check if its the profile or a general issue. It will use a mount if I manually click on the "use mount" button under "Settings and Tools" but it will auto reset after reaching a checkpoint and stop mounting again

When you start HB, Set the settings for your mount before you start using anything. Check the box that says use mount, Uncheck the box thats automatic, and put in the 2 boxes what mount you want to use for ground/fly. Use the same name for both if it can be used for both. Then shut down and restart HB and it should save your settings and keep that way everytime.
 
Having problems as well. Bot tries to pick up a quest from an NPC that doesn't have a quest.

Clear your World of Warcraft and Honorbuddy Cache. If not, take a look at my signature and attach a full log.
 
in deepholm it seems the bot always gets stuck because it doesnt mount so it doesnt start moving. i have to manually mount to get it to move... i dont know what part of the bot this issue is with. i assume it isnt the profile but i really dont know. any help appreciated
Settings & tools > Mount
 
Bot tries to pick up this quest Glowcap Mushrooms - Quest - World of Warcraft
But the char is already friendly with the Sporregar. So the quest is not available anymore.

Needs a rep check or something.

greetz

Weischbier

Hi, Shaak,

THANK you very much for this!

In v2701, we've adjusted the profile such that the PickUp for the quest is not attempted if you are friendly or better with Sporeggar!

cheers & many thanks again,
chinajade


[size=-2]Ref: Shaak's original post[/size]

Update your SVN as this issue has already been reported and addressed.
 
Zone: Hyjal
Quest: [Disassembly]

What should happen: Bot uses Thisalee's Shiv to break a shield that makes it possible to attack and kill 3 Twilight Juggernaut.

What happens: Bot attacks twilight juggernauts continuosly without using Thisalee's Shiv.

Log can be provided upon being asked.

File was too large to upload
 
Zone: Deepholm
Quest: [Elemental Energy]

What should happen: Find 8 Energied Geode, put down a depleted tome and kill the Energied Geode.

What happens: It randomly puts down a depleted tome, even around other mobs that aren't Energied Geode. Sometimes it puts down a tome, grabs agro but doesn't attack the Energied Geode because it isn't hostile.

Log can be provided upon being asked.

File was too large to upload
 
Hello All

I am having a few issues with this profile pack.
1st every time I start the profile it takes me to Valiance Keep in borean tundra (yes i am currently doing wotlk quests) on every zone it will do the same thing, when i was below lvl 60 it would take me to camp everstill in redridge every time i started it as well.
2nd is there any way to make it skip to zones to one that are at the correct quest lvl as atm it is very inefficient as i spend most of my time doing green quests.
3rd The profile seems to setting the kill between hotspots option on in honor buddy and is wasting massive amounts of time killing mobs that give very little exp. Is there a way to stop it from turning this on?

Thanks

Open up either [Fly][A - Quest] LK 68-80 [Kick] or [Fly][H - Quest] LK 68-80 [Kick] with a text editor,Ctrl+F checkpoint to find <QuestOrder IgnoreCheckPoints="true"> and set it to <QuestOrder IgnoreCheckPoints="false">.

That should take care of it!
 
Zone: Uldum

Quest: [Venomblood Antidote]

What should happen: Kill 8 Venomblood Scorpions and fill 8 Anti dote vials with poison.

What happens: Goes next to Venomblood Scorpions but doesn't attack and stands there getting attacked, as if it expects the scorpions to already be dead.

Log can be provided upon being asked.

File was too large to upload
 
On the horde profile, quest Challenge to the Black Flight the bot moves to far in the entrance of onyxia's lair to use the quest item.
 
Firstly, profiles are working really nice of late. 71-80 pretty much all AFK. Even the times I did have to intervene were just a couple of unstucks. Very good work!

80+ seems a little less polished.

Little issue with quest "Diplomacy First" in Deepholm.

Code:
<PickUp QuestName="Diplomacy First" GiverName="Maruut Stonebinder" QuestId="26247" GiverId="43065" />
			<!-- Boat Quests -->
			<If Condition="(HasQuest(26247))" >
				<While Condition="(!Me.IsOnTransport)" >
				 <If Condition="(Me.Z &lt; -20)" >
					<CustomBehavior File="UserSettings" PullDistance="5" UseMount="False" LootMobs="False" />
					<DisableRepair />
					<CustomBehavior File="ForceSetVendor" DoSell="True" DoRepair="True" DoMail="True" />
					<RunTo X="911.9376" Y="504.2825" Z="-49.21472" />
					<CustomBehavior File="FlyTo" X="782.0975" Y="479.5255" Z="-17.09823" />
				 </If>
				 <If Condition="(Me.Z &lt; 355)" >
					<CustomBehavior File="MyCTM" X="1060.557" Y="28.51021" Z="353.1239" />
				 </If>
				 <If Condition="(!Me.IsOnTransport)" >
				  <If Condition="(Me.Y &gt; -100)" >
					<CustomBehavior File="MyCTM" X="1178.397" Y="-40.36254" Z="488.6027" />
				  </If>
					<CustomBehavior File="MyCTM" X="1183.528" Y="-111.3545" Z="482.9987" />
				 </If>

Just results in bot going and standing at around 782.0975" Y="479.5255" Z="-17.09823 on the ground.

I guess it's supposed to fly up to the boat, but on the previous line it's disabled mount usage.

I stopped and stared and cleared cache a number of times before looking at the profile - it just repeats the same thing.

When I manually re-enabled the mount it's off again and flys up to the boat.



[EDITED 30-Aug-2013 by chinajade]: Wullie, thank you for this!
The Deepholm profile is in the process of being recast in terms of the latest Honorbuddy features. This should eliminate a lot of the Deepholm problems.
 
Status
Not open for further replies.
Back
Top