Kick's Mega Profile Packs 1-90

[chinajade]

THREAD MARK: Honorbuddy v2.5.7684.656 was released

Notes to self:

• Profiles should now use Nav="Flying" from 1-80
• 80-90 still in rework (current focus is Hyjal and Deepholm)

Need to look for:

• Flying issues

 

[chinajade]

bot stop and dont do nothing... 50lvl..

Hi, Menand, and thanks for the log.

You log shows Honorbuddy just decided to quit executing the profile. Please try updating Honorbuddy to the latest version (.656--you're on .650), and see if that will repair your issue.

cheers,
chinajade



[size=-2]Ref: [post=1250088]Menand's original post w/log[/post][/size]

 

[chinajade]

WOTLK Quest (Sholazar basin)
Quest unknown

bot on start up keeps trying to get a quest after it has became hated with the frenzyheart doesnt go to the quest it has in its quest log

View attachment 102377

Hi, Riceballs, and thanks for the log.

It appears you are suffering from cache corruption. This article should help you resolve the issue:

[post=1067458]HelpDesk: Cache corruption problems[/post]​

cheers,
chinajade


[size=-2]Ref: [post=1250153]Riceballs' original post w/log[/post][/size]

 

[chinajade]

View attachment 102380

hey kicks im have trouble at 83-84 deep it will not use a mount it walks everywere logs ill get in a bit

Hi, Bigt11,

Alas, this log is from Demonbuddy and we'll be unable to analyze your problem.

cheers,
chinajade


[size=-2]Ref: [post=1250179]Bigt11's original post w/log[/post][/size]

 

[chinajade]

View attachment 102396

Hi, Ericbrewer05, and thanks for the log.

[07:31:43.046 D] System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> Styx.InvalidObjectPointerException: Cannot read a descriptor on an invalid object.
at Styx.WoWInternals.WoWObjects.WoWObject.
[
](UInt32 )
at Styx.WoWInternals.WoWObjects.WoWGameObject.get_Bytes1()​

Your Honorbuddy is no longer communicating with the WoWclient. Please make certain both your WoWclient and Honorbuddy are working with Windoze admin privileges.

If no joy, try rebooting your machine.

This is not a profile issue, so if you still have no joy, please follow up to the Support forum.

cheers,
chinajade


[size=-2]Ref: [post=1250316]Ericbrewer05's original post w/log[/post][/size]

 

[chinajade]

Im a fan of the profile, but i was looking through it and couldnt find anything having to deal with leveling a panda through the starter area. was i just looking over it or is it just not there at all?

Just simply start the [H - Quest] 1-12 Auto-Loader [Kick] or [A - Quest] 1-12 Auto-Loader [Kick] and It'll load up the Pandaren starting zone profile and choose the faction for you depending on which profile you pick.

Hi, Piro,

Lilsavalex is spot on with this. The other alternative is to load the profile directly:

...\Kick's Profiles\1-90 Questing Profile Pack\Classic\[A - Quest] 1-58 [Kick]\[A - Quest] 1-12 [Kick]\[A - Quest] Panda 1-12 [Kick].xml​

We'll leave it up to you to figure out where the corresponding Horde version is located.


cheers,
chinajade

 

[chinajade]

Is BC supposed to be ignoring checkpoints or not? I see in the SVN that at 2692 checkpoints are False, but they are turned True at 2699. The checkpoints were causing my toon to have the problem that I posted earlier. I changed the flag to False and it's leveling in the appropriate zones now.

It's up to you whether you want checkpoints to be turned on or not. Kick must of changed his mind on whether it should be turned on by default.

I understand that it's my choice, but as your quote says the default is False. However, in version 2692 it was set to False and then in 2699 it was set back to True. I was just curious if that was due to the bug fixes and it wasn't changed back, or if it was going to stay defaulted to True because of an issue down the road.

Just wondering why on the 68-80 Horde profile, IgnoreCheckPoints had been set to True. It doesn't seem very optimal for a 76 toon to be wanting to run back to quest in Boraen Tundra, but there must be something I'm missing here?

At first I thought it was just an oversight that was left in from when you were testing, but there have been a few updates since then and it's not changed back.

I know that I can change it manually (and have done!), however, this causes my SVN client to then fail to update that particular file when you make updates. And with all the changes in the recent release of HB, the profiles seem to be getting a lot of changes recently.

Is there an easy way around the SVN issue?

BTW - The profiles are seeming really slick at the moment (from 71-76 anyways), and I'm barely having to intervene at all, so keep up the good work.

Hi all,

I originally thought IgnoreCheckpoints="True" were mistakes made by maintainers. However, it appears that Hawker has directed this to be the setting for now. There is still internal debate going on over the setting. A final decision should be coming in a few days.

You are always free to change the setting yourself. Those wearing Heirlooms or with guild perks will want

<IgnoreCheckpoints="False" />​

But that setting may cause you to skip critical content. Completionists, and those seeking 'as afk as possible', will want:

<IgnoreCheckpoints="True" />​

Please do not make posts to this thread expressing your opinion on this--we are well aware of the arguments for both sides. What many may not see is the serious maintenance issues caused due to phasing, quest chains, etc.


cheers,
chinajade

 

[chinajade]

Got problem with this profile , please help , logs are here. Profille is stuck searching quest giver ... please help .... have HB fresh instaled , last version and use singular as routine

Hi, Micburic11, and thanks for the log.

[09:21:23.405 D] Could not generate path from {-331.6706, 4700.806, 49.04399} to {-1010.14, 4301.38, 68.1336} (time used: 0 milliseconds) @ FindStartPoly​

Simply dismount, then start Honorbuddy again. More information here:

[post=1070048]HelpDesk: Honorbuddy can't find the quest-giving NPC[/post]​

With the latest Honorbuddy capabilities, we are working hard on the profiles to eliminate these kinds of issues.

cheers,
chinajade



[size=-2]Ref: [post=1251047]Micburic11's original post w/log[/post][/size]

 

[chinajade]

Okay heres a log where it blacklists a mob thats required for a quest and is attacking him, it just keeps selcting and deselecting the mob w/o attacking, resulting in dieing multiple timesView attachment 102507

Hi, Escequi, and thanks for the log.

The problem is your Combat Routine. It thinks it is smarter about target selection that the quest behavior. This is a fatal mistake as you've found out.

Go back to using Singular while questing.

cheers,
chinajade



[size=-2]Ref: [post=1251343]Escequi's original post w/log[/post][/size]

 

[chinajade]

I am having a few issues with this profile pack.
1st every time I start the profile it takes me to Valiance Keep in borean tundra (yes i am currently doing wotlk quests) on every zone it will do the same thing, when i was below lvl 60 it would take me to camp everstill in redridge every time i started it as well.
2nd is there any way to make it skip to zones to one that are at the correct quest lvl as atm it is very inefficient as i spend most of my time doing green quests.
3rd The profile seems to setting the kill between hotspots option on in honor buddy and is wasting massive amounts of time killing mobs that give very little exp. Is there a way to stop it from turning this on?

Hi, Dilbog,

We really need to see a log to help you with issues.

Ref: [post=378165][Guide] How to attach your log[/post]​

For your 1st issue, we're going to guess that your cache is corrupt. Information and remedy here:

[post=1067458]HelpDesk: Cache corruption problems[/post]​

For your 2nd question, please find your answer in this article:

[post=1105561]HelpDesk: Quests are 'green' or 'gray'[/post]​

For your 3rd question, please find your answer in this article:

[post=1067665]HelpDesk: Honorbuddy settings don't 'stick', or they get changed[/post]​

cheers,
chinajade

 

[chinajade]

As the title says, since the big update when a pop up appears to finish a quest, not at a questgiver, the bot stops. Jade forrest has a lot of these problems at the moment. This is happening with multiple characters on different honorbuddy folders.
Added the log

Hi, Decks, and thanks for the log!

There was a problem with one of the recent Honorbuddy drops and the CompleteLogQuest behavior. Please update your Honorbuddy, and this problem should be repaired.

cheers,
chinajade



[size=-2]Ref: [post=1251846]Decks' original post w/log[/post][/size]

 

[chinajade]

not sure if this have happend to you but, whenever my char is going attack some mob, he first mounts and then dismounts and then start attacking. Kinda annoying but, any fix for this? or you need a log ?

Im doing rogue from 85 to 90 and im in the first part of mop alliance. The bot seems to be working ok exept that every action it takes it pauses for like 5 seconds after so it looks extremely suspicious..for example when it runs it run for like 10 meters and stops for 3-5 sec and the repeats..is it supposed to be like that? same with combat it seems really clumsy.

At the moment I am in Deepholm and the bot keeps using the ground mount to run from the middle of the stonecore to the outside a very short distance where it then mounts a flying mount.It does this in alot of places.Or it runs for miles,just wish it would get on the damn bird to begin with.But hey thanks for a fantastic set of profiles they are amazing.

Having the same problems with Deepholm. Often doesn't even mount. Just runs itself into mountains constantly thinking its on its flying mount etc. Other than that it's been pretty good up until Deepholm.

Hi, all,

There is no way to help you with issues like this, unless you let us see what is going on by attaching your full log that captures the problem.

Ref: [post=378165][Guide] How to attach your log[/post]​

Just FYI, the Deepholm profile is being reworked to take advantage of important Honorbuddy features in the latest drop.

cheers,
chinajade

 

[chinajade]

My bot keep setting use mount to off, like i open settings & tools, tick the mount checkbox, save & close then the bot mounts and then it untick the checkbox often

Hi, Escequi,

You may find this article helpful:

[post=1067665]HelpDesk: Honorbuddy settings don't 'stick', or they get changed[/post]​

If you need further assistance, we will need to see the full log that captures the issue.

Ref: [post=378165][Guide] How to attach your log[/post]​

cheers,
chinajade

 

[chinajade]

Shatari reputation gives this after completing the first 2 quests:
Could not find quest giver NPC with ID 32523 in database.

Hi, Zorno,

Please find your answer in this article:

[post=1070048]HelpDesk: Honorbuddy can't find the quest-giving NPC[/post]​

You got lucky this time--next time, please attach your full log.

Ref: [post=378165][Guide] How to attach your log[/post]​

cheers,
chinajade

 

[chinajade]

View attachment 102689
I try to run [Fly][H - Quest] BC 58-70 [Kick] and i keep getting this error. What is the problem?

Hi, Carrottopa,

Please find your answer in this article:

[post=1150713]HelpDesk: "Can not find profile fitting the character"[/post]​

You got lucky this time--next time, please attach your full log that captures the issue.

Ref: [post=378165][Guide] How to attach your log[/post]​

cheers,
chinajade

 

[chinajade]

Keeps failing at picking up "Picking Up Quest - The Consortium Needs You! : QuestID - 9913"

Hi Ruinit,and thanks for the log.

[23:27:00.100 D] Changed POI to: Type: QuestPickUp
[23:27:00.792 D] InteractDebug:919462628
[23:27:00.798 D] Interact Done:919462628
[23:27:02.944 D] InteractDebug:919462628
[23:27:02.949 D] Interact Done:919462628
[23:27:05.717 D] InteractDebug:919462628​

I assume you've tried clearing the cache.

[post=1067458]HelpDesk: Cache corruption problems[/post]​

If no joy, please make a post to the Support forum. This issue is not a problem with Kick's profile pack.

cheers,
chinajade



[size=-2]Ref: [post=1253617]Ruinit's original post w/log[/post][/size]

 

[panYama]

note to chinajade: LK profile had checkpoint set to True, it wants to do all quests instead of quicker zone swaps.

 

[Zuppa]

Where is the dawload pls link me

 

[Verminard]

Profile name chaging

When the char reaches are certain lvl the profile is not switching. I've clear caches and fresh installs

 

[Recyclops]

I keep getting quest behavior errors. I have fully updated through svn. Any help would be great thanks