What's new
  • Visit Rebornbuddy
  • Visit Panda Profiles
  • Visit LLamamMagic
  • Visit Resources
  • Visit Downloads
  • Visit Portal
RebornBuddy Forums

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

HB ARCHIVES: Kick's Old Posts Thread--DO NOT DELETE!

Status
Not open for further replies.
I have been trying it out for some time now .. first of i love the idea behind this script!

Attached a log from to day.

been sitting and watching it for a while now, because I thought it was funny how, when I was back - it hadden complete the dailies.
atm Klaxxi

sometimes, it just flies to the correct lokation, doesnt pull mobs - only if it lands directly on top of them. sits there for a few sec. mounts up and flies to the next quest location.

then suddenly changes script.

any idea, if I am doing anything wrong setting it up or ?? :)
 

Attachments

Hello! Was hoping for a little help as I can't find the settings and to also give a little feedback. So far while using this the bot has a tendency to vendor things that I wish it didn't like herbs, cloths, ores and cooking regents. I know this will be my error somewhere.

Secondly just to pop-out the fact the bot seemed to think it would be able to solo sha while on it's way to do a quest and wasn't sure if you'd want to add black-spots or avoidance routes for the areas that sha spawns?

Many thanks and apologies for nooby aggrievance :P
 
any way to skip a quest on these profiles? Im on 'In the house of the red crane' quest in Krasarang Wilds and the bot wont do it and i just cant do it after an hour and a half of trying. I just want to move past this quest but the script just keeps bringing me back. Any ideas? besides loosing a whole day of gameplay and asking a guild member when they come on to help?
 
any way to skip a quest on these profiles? Im on 'In the house of the red crane' quest in Krasarang Wilds and the bot wont do it and i just cant do it after an hour and a half of trying. I just want to move past this quest but the script just keeps bringing me back. Any ideas? besides loosing a whole day of gameplay and asking a guild member when they come on to help?

Just delete it from the profile. Do a search in the file for the specific quest and just delete the entire line of code. Just make sure you delete the <PickUp QuestName and <TurnIn QuestName lines and also any custombehaviors for the specific quest.
 
Just delete it from the profile. Do a search in the file for the specific quest and just delete the entire line of code. Just make sure you delete the <PickUp QuestName and <TurnIn QuestName lines and also any custombehaviors for the specific quest.

thanks!
 
Having a lot of problems with this profile

Just then: Doesn't click on the Stormcaller objects in 'High Chance of Rain' during Golden Lotus dailies
Before: Completed 2 quests, went to hand them in then moved to Augustus Celestials dailies. Didn't even finish all the phase 1 GL dailies

log of just then:View attachment 73951

99% of your log file is thrown errors from your plugins. Namely Azenius, and a few from Pandaria Dailies. I recommend a reinstall as described in my troubleshooting, and also reinstalling azenius (or disabling it). That should fix skipping quests too, as the #1 reason for skipped quests is an unclear cache or old install.
 
I have been trying it out for some time now .. first of i love the idea behind this script!

Attached a log from to day.

been sitting and watching it for a while now, because I thought it was funny how, when I was back - it hadden complete the dailies.
atm Klaxxi

sometimes, it just flies to the correct lokation, doesnt pull mobs - only if it lands directly on top of them. sits there for a few sec. mounts up and flies to the next quest location.

then suddenly changes script.

any idea, if I am doing anything wrong setting it up or ?? :)

In your log, Singular is throwing a lot of errors. Looks like its trying to enter combat, but the commands to do so are causing errors. Recommend a reinstall of HB, including a wipe and reinstall of singular (which is included). Don't overwrite your folder, actually delete it (you do not have to delete the Quest Behaviors or Plugins folders) and reinstall. I'm no master at Styx errors, its only a guess, but I don't see any errors coming from my profile in your log.

System.NullReferenceException: Object reference not set to an instance of an object.
at Singular.Helpers.Unit.UnfriendlyUnitsNearTarget(Single distance) in d:\Games\HB\Routines\Singular\Helpers\Unit.cs:line 147
at Singular.ClassSpecific.Shaman.Elemental.<CreateShamanElementalNormalCombat>b__17(Object ret) in d:\Games\HB\Routines\Singular\ClassSpecific\Shaman\Elemental.cs:line 158
at Styx.TreeSharp.Decorator.CanRun(Object context)
at Styx.TreeSharp.Decorator..()
at Styx.TreeSharp.Composite.Tick(Object context)
at Styx.TreeSharp.PrioritySelector..()
at Styx.TreeSharp.Composite.Tick(Object context)
at Styx.TreeSharp.Decorator..()
at Styx.TreeSharp.Composite.Tick(Object context)
at Styx.TreeSharp.PrioritySelector..()
at Styx.TreeSharp.Composite.Tick(Object context)
at Styx.TreeSharp.PrioritySelector..()
at Styx.TreeSharp.Composite.Tick(Object context)
at Styx.TreeSharp.PrioritySelector..()
at Styx.TreeSharp.Composite.Tick(Object context)
at Singular.SingularRoutine.LockSelector.Tick(Object context) in d:\Games\HB\Routines\Singular\SingularRoutine.Behaviors.cs:line 170
at Styx.TreeSharp.PrioritySelector..()
at Styx.TreeSharp.Composite.Tick(Object context)
at Styx.TreeSharp.Decorator..()
at Styx.TreeSharp.Composite.Tick(Object context)
at Styx.TreeSharp.PrioritySelector..()
at Styx.TreeSharp.Composite.Tick(Object context)
at Styx.TreeSharp.PrioritySelector..()
at Styx.TreeSharp.Composite.Tick(Object context)
at Styx.TreeSharp.PrioritySelector..()
at Styx.TreeSharp.Composite.Tick(Object context)
at Styx.CommonBot.TreeRoot.()

Thats what your log is spamming. On top of that, when it finally stopped spamming it, it seems your bot is only casting Lightning Bolt. Thats on Klaxxi.

When it flies to Golden Lotus, a few exceptions get thrown from your Quest Behaviors folder (namely LoadProfile.cs) then it lands, picks up nothing, and flies on. This is PROBABLY because your bot is telling it that you have already completed all the Golden Lotus Dailies that are available to you. Again, I recommend a reinstall, as this is most likely due to an unclean cache folder, or an old install.
 
Anyway i can prevent the bot from vendoring greens? id like to use them to lvl my enchantings as i go along!
 
Not sure what changed since yesterday, but im 3/4 the way thru revered with The golden lotus. I did my clean install of Hb this morning and copied both plugins and quest behaviors over. And for some reason its sending me to the prereq quests for golden lotus and it just stands there trying to pick up a quest it has already completed. thoughts? I also tried to just clear the cache from an Hb install. it did 4 quests or so from phase 1 then it just stops and doesnt complete those quests or look for phase 2 kickers
 
Last edited:
Not sure what changed since yesterday, but im 3/4 the way thru revered with The golden lotus. I did my clean install of Hb this morning and copied both plugins and quest behaviors over. And for some reason its sending me to the prereq quests for golden lotus and it just stands there trying to pick up a quest it has already completed. thoughts? I also tried to just clear the cache from an Hb install. it did 4 quests or so from phase 1 then it just stops and doesnt complete those quests or look for phase 2 kickers

Most likely the bot is looking for an optional quest that disappears if you start on the prerequisite quests halfway through. I had anticipated it, and now I'm going have to deal with. I'll take care of it tonight.

If your bot is stopping halfway through an area and then moving onward, 99 percent chance is that it has an issue with your install. A log file would help me diagnose.
 
View attachment 74007
hey just wanna let you know its an ace profile!
character got stuck on a klaaxi quest and just stood there and did nothing.
log attached!

That's wierd. Bot is actually "just sitting there". I'll have to look into that quest (a little brain work was the last one it called) and it just stopped sending instructions.

How new is your install? Do you overwrite or install fresh?
 
no i use it daily
last week I reinstalled HB fresh and since then I keep deleting the cache and meshes..(as i read here that that's suppose to make the bot run better??)
keep running SVN udates before I start the profiles/CC tho..
 
no i use it daily
last week I reinstalled HB fresh and since then I keep deleting the cache and meshes..(as i read here that that's suppose to make the bot run better??)
keep running SVN udates before I start the profiles/CC tho..

You never have to delete the meshes, you just have to re-download them anyway. They keep up-to-date automatically. You do however, need to delete the cache folder, and most times actually have to reinstall the bot on a daily basis. I have to reinstall every day, most of my quests seem to break regardless of the deleting the cache folder.
 
View attachment log2.txt

hmm also the quest for golden lotus. where you have to loot the stunned carps. it just seems to swim to the ground and stay there...dunno why.
re-install all of HB daily? sounds like effort lol
 
View attachment 74020

hmm also the quest for golden lotus. where you have to loot the stunned carps. it just seems to swim to the ground and stay there...dunno why.
re-install all of HB daily? sounds like effort lol

Looked at your log. I see the issue. Pathing in water is....well almost impossible under normal RunTo/FlyTo rules. It requires a Nav="CTM" clause within the InteractWith command. I probably forgot to put it in, and I know I haven't had that quest yet since I programmed it. I'll post a hotfix tonight for it.

Yes it is effort, but it also makes for a full AFK bot experience ;)
 
Last edited:
Is he going to make it so you can use gorund mounts at dread wastes? seams kinda dumb to have to be level 90 to quest in the zone.
 
In your log, Singular is throwing a lot of errors. Looks like its trying to enter combat, but the commands to do so are causing errors. Recommend a reinstall of HB, including a wipe and reinstall of singular (which is included). Don't overwrite your folder, actually delete it (you do not have to delete the Quest Behaviors or Plugins folders) and reinstall. I'm no master at Styx errors, its only a guess, but I don't see any errors coming from my profile in your log.

System.NullReferenceException: Object reference not set to an instance of an object.
at Singular.Helpers.Unit.UnfriendlyUnitsNearTarget(Single distance) in d:\Games\HB\Routines\Singular\Helpers\Unit.cs:line 147
at Singular.ClassSpecific.Shaman.Elemental.<CreateShamanElementalNormalCombat>b__17(Object ret) in d:\Games\HB\Routines\Singular\ClassSpecific\Shaman\Elemental.cs:line 158
at Styx.TreeSharp.Decorator.CanRun(Object context)
at Styx.TreeSharp.Decorator..()
at Styx.TreeSharp.Composite.Tick(Object context)
at Styx.TreeSharp.PrioritySelector..()
at Styx.TreeSharp.Composite.Tick(Object context)
at Styx.TreeSharp.Decorator..()
at Styx.TreeSharp.Composite.Tick(Object context)
at Styx.TreeSharp.PrioritySelector..()
at Styx.TreeSharp.Composite.Tick(Object context)
at Styx.TreeSharp.PrioritySelector..()
at Styx.TreeSharp.Composite.Tick(Object context)
at Styx.TreeSharp.PrioritySelector..()
at Styx.TreeSharp.Composite.Tick(Object context)
at Singular.SingularRoutine.LockSelector.Tick(Object context) in d:\Games\HB\Routines\Singular\SingularRoutine.Behaviors.cs:line 170
at Styx.TreeSharp.PrioritySelector..()
at Styx.TreeSharp.Composite.Tick(Object context)
at Styx.TreeSharp.Decorator..()
at Styx.TreeSharp.Composite.Tick(Object context)
at Styx.TreeSharp.PrioritySelector..()
at Styx.TreeSharp.Composite.Tick(Object context)
at Styx.TreeSharp.PrioritySelector..()
at Styx.TreeSharp.Composite.Tick(Object context)
at Styx.TreeSharp.PrioritySelector..()
at Styx.TreeSharp.Composite.Tick(Object context)
at Styx.CommonBot.TreeRoot.()

Thats what your log is spamming. On top of that, when it finally stopped spamming it, it seems your bot is only casting Lightning Bolt. Thats on Klaxxi.

When it flies to Golden Lotus, a few exceptions get thrown from your Quest Behaviors folder (namely LoadProfile.cs) then it lands, picks up nothing, and flies on. This is PROBABLY because your bot is telling it that you have already completed all the Golden Lotus Dailies that are available to you. Again, I recommend a reinstall, as this is most likely due to an unclean cache folder, or an old install.

It seems to be working now to a certain degree.

did what you said, I delete my hb folder with all content, downloaded a new version and started that.
It still flies to the target area, and tries to target mobs - but it failes:
MoveToTarget: Could not generate path to target: Mistblade Ripper, blacklisting!MoveToTarget: Could not generate path to target: Mistblade Ripper, blacklisting!

here for Mistblade Destruction,
it did that same thing with the turtles for Kunchong Treats

Even when I placed them right in front of the mistblade mobs
 

Attachments

Last edited:
Status
Not open for further replies.
Back
Top