What's new
  • Visit Rebornbuddy
  • Visit Panda Profiles
  • Visit LLamamMagic
  • Visit Resources
  • Visit Downloads
  • Visit Portal

[Grandfathered] Leaves - Tree Heals Go Whoosh

Hi Mirabis,

Proving ground works pretty decent, it kinda needs luck to to be perfect but there is one thing you should maybe change or look into. As far as I can see routine doesn't use Ironbark at all, it's set to 40% on Tank but I have never seen it used and also checked in logs and there are not traces of it being used. There are situations where use of it would be more then beneficial and would help overcome some tough situations :)
 
Hi Mirabis,

Proving ground works pretty decent, it kinda needs luck to to be perfect but there is one thing you should maybe change or look into. As far as I can see routine doesn't use Ironbark at all, it's set to 40% on Tank but I have never seen it used and also checked in logs and there are not traces of it being used. There are situations where use of it would be more then beneficial and would help overcome some tough situations :)
It should, it's hard coded. E.g on the enrage of Conqueror - I need to see ur log then. The Health check is disabled in automatic mode atm so it can use it at the right wave
 
I have just checked it again till wave 25. We have Large Conqueror on every fifth wave (5, 10, 15...) and Ironbark was never used and there really was need for it (that's why he blow it on wave 25). I watched with my own eyes but log is also attached for you too look at it. Btw I found out that there is no need at all for mana save with this profile so I turned it off, I rarely ever gone to 50% of mana and as it usually very fast back on over 80%, he didn't even want to sit and eat after 10th wave so I feed him manually.
 

Attachments

With the state of Resto Druids in Arena at the moment, with an incredible update to the Resto logic for PvP there is great potential for the CR.

I know how busy developers are, but I would hope many people would agree with me on this one, Resto PvP should be close to top priority for the next update!

i concur - it falls on its face pvp wise. pve wise im loving it.

that being said, (i have to find my other post to see if i got a response regarding the arena setting xml) but im also wondering if it needs work for kargath or if im doing something incorrectly as far as configuration?

We were doing kargath last night and when I went up it continually tried to heal people down below which were out of LOS so instead of healing the people up top it needed to it continually tried to heal people below..

advise?
 
The settings file is invalid:

Code:
{
  "DiItems": [
    "Corrosive Blood",
    "Torment",
    "Toxic Torment",
    "Frostburn Formula",
    "Burning Blood",
    "Blackout",
    "Shadow Word: Bane",
    "Lingering Corruption",
    "Mark of Arrogance",
    "Aqua Bomb",
    "Stone Gaze",
    "Blazing Sunlight",
    "Venom Bolt Volley",
    "Deadly Plague",
    "Hex of Confusion",
    "Entrapped",
    "Fragile Bones",
    "Clouded Mind",
    "Dulled Synapses",
    "Impaired Eyesight",
    "Horrific Visage",
    "Closed Circuit",
    "Suppression",
    "Lightning Prison",
    "Mark of Arrogance",
    "Shadow Word: Frailty",
    "Dreadpetal Toxin",
    "Withering Flames",
    "Subjugate"
  ]
}


I'll delete it and add some validatio nfor it.

thank you very much!!
 
I have just checked it again till wave 25. We have Large Conqueror on every fifth wave (5, 10, 15...) and Ironbark was never used and there really was need for it (that's why he blow it on wave 25). I watched with my own eyes but log is also attached for you too look at it. Btw I found out that there is no need at all for mana save with this profile so I turned it off, I rarely ever gone to 50% of mana and as it usually very fast back on over 80%, he didn't even want to sit and eat after 10th wave so I feed him manually.

Im sure it's not but just to make 100% sure. Ironbark isnt switched off under spells tab is it?
 
Will look into the modifiers under automatic mode :)

Thanks, i noticed it on heroic butcher. It used genesis 70 times which counts for about 500,000 mana over the course of the fight. No wonder i was oom at 40% of boss hp.
 
[21:248]: Exception in OnButtonPress(): System.ArgumentOutOfRangeException: Value of '100.000000376832' is not valid for 'Value'. 'Value' should be between 'Minimum' and 'Maximum'.
Parameter name: Value
at System.Windows.Forms.NumericUpDown.set_Value(Decimal value)
at Leaves.GUI.NewGUI.‪‏*‏‪‬​**‬‎**​‫*‎‎*‫‫‫
‪‎*(NumericUpDown , Decimal )
at Leaves.GUI.NewGUI.LoadOnOffBoxes()
at Leaves.GUI.NewGUI..ctor()
at Leaves.Root.OnButtonPress()


Doesn't open the class settings anymore :s

Edit;

It's acting all strange.. I can load my own settings, but when I change something like 'Attack' to ON, it doesn't save it. When I recheck settings, the button is on 'ON', but the CR is not attacking.
Same with if I want to load uploaded settings and for example change the numbers on Wild Growth, it saves the numbers I entered but it works with the numbers that were in the original file?

Never had this before.
 
Last edited:
Does Leaves support healing through Dream of Cenarius automatically? I tried just changing Attack to "On", but that doesn't seem to do it and I don't see a Wrath "on" button in the spells pane.
 
Does Leaves support healing through Dream of Cenarius automatically? I tried just changing Attack to "On", but that doesn't seem to do it and I don't see a Wrath "on" button in the spells pane.
It should, can u upload a log? Somehow it randomly breaks at times -.- not sure if HB or not.
 
Noticed that it likes to dispel the fire debuff on Ko'grah. That doesn't need to happen unless it performs a range check before doing so.
 
It should, can u upload a log? Somehow it randomly breaks at times -.- not sure if HB or not.

I have the same problem. The weird thing is, if I load settings that have attack ON, it attacks, if I have settings that have attack OFF, but I turn it ON, it doesn't attack. So maybe it doesn't get saved somehow?
Like I posted in an earlier post, it doesn't seem to save anything for some reason. It saves the numbers, but it doesn't seem to apply them.

For Example

Wild Growth:

90
90
100

If I change this too:

55
55
55

The numbers get saved, but it still applies WG according to the numbers that were there earlier, so 90 90 100.
 
I have just checked it again till wave 25. We have Large Conqueror on every fifth wave (5, 10, 15...) and Ironbark was never used and there really was need for it (that's why he blow it on wave 25). I watched with my own eyes but log is also attached for you too look at it. Btw I found out that there is no need at all for mana save with this profile so I turned it off, I rarely ever gone to 50% of mana and as it usually very fast back on over 80%, he didn't even want to sit and eat after 10th wave so I feed him manually.
Does brackenspore work now?
i concur - it falls on its face pvp wise. pve wise im loving it.

that being said, (i have to find my other post to see if i got a response regarding the arena setting xml) but im also wondering if it needs work for kargath or if im doing something incorrectly as far as configuration?

We were doing kargath last night and when I went up it continually tried to heal people down below which were out of LOS so instead of healing the people up top it needed to it continually tried to heal people below..

advise?

This is odd, but not much I can do. It Checks LoS - and if HB returns true ... I'm afraid the routine will think it's true.

Thanks, i noticed it on heroic butcher. It used genesis 70 times which counts for about 500,000 mana over the course of the fight. No wonder i was oom at 40% of boss hp.
Yeh, i'll toy around with the mods this weekend.

[21:248]: Exception in OnButtonPress(): System.ArgumentOutOfRangeException: Value of '100.000000376832' is not valid for 'Value'. 'Value' should be between 'Minimum' and 'Maximum'.
Parameter name: Value
at System.Windows.Forms.NumericUpDown.set_Value(Decimal value)
at Leaves.GUI.NewGUI.‪‏*‏‪‬​**‬‎**​‫*‎‎*‫‫‫
‪‎*(NumericUpDown , Decimal )
at Leaves.GUI.NewGUI.LoadOnOffBoxes()
at Leaves.GUI.NewGUI..ctor()
at Leaves.Root.OnButtonPress()


Doesn't open the class settings anymore :s

Edit;

It's acting all strange.. I can load my own settings, but when I change something like 'Attack' to ON, it doesn't save it. When I recheck settings, the button is on 'ON', but the CR is not attacking.
Same with if I want to load uploaded settings and for example change the numbers on Wild Growth, it saves the numbers I entered but it works with the numbers that were in the original file?

Never had this before.

Thanks for the edited insight, will look into the saving issue.
 
Noticed that it likes to dispel the fire debuff on Ko'grah. That doesn't need to happen unless it performs a range check before doing so.

Blacklisted for normal dispel, added for Rangecheck dispell.
I have the same problem. The weird thing is, if I load settings that have attack ON, it attacks, if I have settings that have attack OFF, but I turn it ON, it doesn't attack. So maybe it doesn't get saved somehow?
Like I posted in an earlier post, it doesn't seem to save anything for some reason. It saves the numbers, but it doesn't seem to apply them.

For Example

Wild Growth:

90
90
100

If I change this too:

55
55
55

The numbers get saved, but it still applies WG according to the numbers that were there earlier, so 90 90 100.

This was tested in Manual Mode?
 
Does Leaves support healing through Dream of Cenarius automatically? I tried just changing Attack to "On", but that doesn't seem to do it and I don't see a Wrath "on" button in the spells pane.
Any chance Selective Healing is turned on ?
 
Yes, settings were Raid & Manual.

Did u happen to have the GUI open by chance, I'm pretty sure the gui numbers change but if u don't close the GUi the SaveToFile never (or delayed) gets called.
 
Did u happen to have the GUI open by chance, I'm pretty sure the gui numbers change but if u don't close the GUi the SaveToFile never (or delayed) gets called.

I am aware of this and the GUI was closed also tried stopping and restarting the bot, but nothing. I will try again today and see if I can post a log of it.
 
Back
Top