HB ARCHIVES: Kick's Old Posts Thread--DO NOT DELETE!

[Over]

My bot just runs with the flying mount.. it just wont fly.. any solutions?

thanks

 

[btaddict]

have hb fly more (assuming you have plugin/lifetime, of course) whenever it mounts up, whether between hotspots, between mobs, etc..
There's really no reason to be seen running around...on your flying mount...from ironforge to stormwind...or if you're gonna run, at least swap mounts to ground...maybe you can fool someone into thinking you're lower level or something...when i see an 84/85 toon following the road riding on a flying mount...that's just not right. It would be faster to fly....and at the very least if you are on the ground, you would be doing straight lines, and not following the winding road.

 

[candleman2005]

I'm new to hb so I was just wondering screw things before I try this profile. Does it automatically use talent points and equip bette gear ? And what happens with heirloom gear ?
Thanks

 

[bytepoet]

I would like proper updated documentation for everything from botbases to api's.

 

[HB2464V52]

A question -

I've searched the forums and all the settings and I cannot find a solution... I'm a lvl 46 Human Paladin using this profile and whenever I need to repair or sell anything, the bot chooses to go to Brother Sammuel who is at the starting zone. I can see the other vendors in the profile but the bot insists on going to Brother Sammuel. I have turned off training, is it trying to kill two birds with one stone by repairing/training all in one? Not sure if this is a profile issue or just an HB issue or what but seeing as round-trip (not including adds) is around 15 minutes, it's very frustration.

Thanks Kick (or whoever answers this).

PS - I'm not sure if a log is necessary as it's likely not a profile problem but I've attached one anyways for good measure.

 

[Jvidia]

Having a slight issue at Wyrmest Temple when the bot tries to go to the top or the bottom of the tower he wont ask the dude! He cancels it and tries to run up.

[BasicInteractWith(warning) @line 3205]: Attribute 'NumOfTimes' is not recognized by this behavior--ignoring it.

[ForcedDismount(info) @line 3206]: Dismounting

[RunMacro(info) @line 3207]: Running macro 1 times



I think thats the Issue line from HB!

 

[HB5158B71]

Currently selection of Heal Targets is the responsibility of the CC. HonorBuddy doesn't have built in support for communicating Bot selection of Heal Targets in the way it does for DPS Targets.

I use your Shaman CC for healing so, in a later release, would it be possible to implement this logic?

 

[vickydudexxx]

I would love some improvement in InstanceBuddy movement. While i babysit , i watch it ... and tbh my char should be known as Obvious Joe . Pretty "bot"-ish movement . Regards , Victor.

 

[P8ntman]

I got stuck at howling fjord trying to turn in We can rebuild it without all the parts

First log was the origonal stuck log 2nd was me restarting HB and making sure I install your Quest behaviors still stuck

I dropped the quest and let it redo it I think it forgot the dark iron ingot not to sure should have checked before abandoning it

 

[realkiller2]

[MountVehOnly(warning)]: Found attribute via its alias name 'NpcMountId'.
Please update the profile to use its primary name 'VehicleMountId', instead.

im getting this error and it walks to a tree and stops there. Not sure whats wrong help plz
this is for mt.hyj 80-82

 

[gward]

awesome package, most comprehensive one i've used so far. an error on the one named [A] BC 56-68 [Kick] Left, when it goes back to try to sell and repair in nagrand it continually tries to run through garadar (even though i added it as a blackspot), which is a pretty good way to get a ban. i added this vendor:

<Vendor Name="Paulsta'ats" Entry="23007" Type="Repair" X="-2054.747" Y="8609.072" Z="22.16262" />

seems to have fixed it.

 

[Klaasvaak]

I got problems with the "Zen'Kiki, the druid"quest in WPL.
It does get the quests, complete all the others there. But then heads off to STV and flies back then starts grinding without Zen'Kiki around. So he does not get the 20 kills he needs for the quest.

Hope this helps ^^

 

[Kickazz006]

A question -

I've searched the forums and all the settings and I cannot find a solution... I'm a lvl 46 Human Paladin using this profile and whenever I need to repair or sell anything, the bot chooses to go to Brother Sammuel who is at the starting zone. I can see the other vendors in the profile but the bot insists on going to Brother Sammuel. I have turned off training, is it trying to kill two birds with one stone by repairing/training all in one? Not sure if this is a profile issue or just an HB issue or what but seeing as round-trip (not including adds) is around 15 minutes, it's very frustration.

Thanks Kick (or whoever answers this).

PS - I'm not sure if a log is necessary as it's likely not a profile problem but I've attached one anyways for good measure.

user error. he's going to train, but i've moved the starting trainers back in their respective areas, so it should go to IF if you have training set to true (if you're in WPL / EPL)

 

[Kickazz006]

I got problems with the "Zen'Kiki, the druid"quest in WPL.
It does get the quests, complete all the others there. But then heads off to STV and flies back then starts grinding without Zen'Kiki around. So he does not get the 20 kills he needs for the quest.

Hope this helps ^^

not 1 bit. as stated in the first 3 posts, i need a log

 

[HB2464V52]

user error. he's going to train, but i've moved the starting trainers back in their respective areas, so it should go to IF if you have training set to true (if you're in WPL / EPL)

Even with Training set to True.. still goes to Brother Sammuel. Plus he goes there to Sell stuff when my bags are full.

 

[Kickazz006]

Even with Training set to True.. still goes to Brother Sammuel. Plus he goes there to Sell stuff when my bags are full.

re svn

 

[HB2464V52]

Thanks Kick. I've got another bot running but I'll update shortly.

 

[Evildenny]

I keep on getting error

Could not create current in quest bot!

This is after it Completed the quests on Coldarra.

See today's log that is after just starting it up

Any ideas?

Thanks

I also added the previous log as well

 

[Kickazz006]

Having a slight issue at Wyrmest Temple when the bot tries to go to the top or the bottom of the tower he wont ask the dude! He cancels it and tries to run up.

[BasicInteractWith(warning) @line 3205]: Attribute 'NumOfTimes' is not recognized by this behavior--ignoring it.

[ForcedDismount(info) @line 3206]: Dismounting

[RunMacro(info) @line 3207]: Running macro 1 times



I think thats the Issue line from HB!

yeah, i need to change that to flyto

 

[Kickazz006]

I keep on getting error

Could not create current in quest bot!

This is after it Completed the quests on Coldarra.

See today's log that is after just starting it up

Any ideas?

Thanks

I also added the previous log as well

if you dc, you must use the items in your bags before starting