What's new
By:
  • Visit Rebornbuddy
  • Visit Panda Profiles
  • Visit LLamamMagic
  • Visit Resources
  • Visit Downloads
  • Visit Portal

HB ARCHIVES: Honorbuddy Profile Pack--DO NOT DELETE!

Hi, great product but i have one question. after revered, why does it not continue to farm the blackfang claws?? would be awesome if it could continue to farm them after revered! :)
 
ectocooler said:
looks like it got stuck in Talador on the Shattrath City Scenario. Log below

View attachment 197026

I am re-running it to see if it reproduces the stuck.
Click to expand...
I've seen this issue come up a few times in the past, not entirely sure what 'causes' it.

But if I had to guess, the bot is (somehow) falling off the boat.
With my testers, it seems to happen fairly rarely, not every time.

Once I get some testers out to that spot, I'll work in some failsafes that will make the bot 'properly' get back on the boat if it falls.
Thanks for the report and log!
 
Clickiee said:
As far as the flying from 90-100. I believe the profiles aren't designed for flying from 90-100 and if they aren't would that be the cause of it?
Click to expand...
The profiles support both ground and flying fully and are tested regularly with both.
What issues are you having?
 
Lignos said:
Hi, great product but i have one question. after revered, why does it not continue to farm the blackfang claws?? would be awesome if it could continue to farm them after revered! :)
Click to expand...
Are you using the Tanaan Dailies profile?
If so, untick "Grind Saberstalkers" on the profile config menu.
 
EchoTiger said:
I've seen this issue come up a few times in the past, not entirely sure what 'causes' it.

But if I had to guess, the bot is (somehow) falling off the boat.
With my testers, it seems to happen fairly rarely, not every time.

Once I get some testers out to that spot, I'll work in some failsafes that will make the bot 'properly' get back on the boat if it falls.
Thanks for the report and log!
Click to expand...

When I caught it, it was standing just off where Gazlowe and Thaelin are. Probably the scenario reset prior to that point, so I don't have a lot of information to help out.
 
EchoTiger said:
Are you using the Tanaan Dailies profile?
If so, untick "Grind Saberstalkers" on the profile config menu.
Click to expand...

you sir, are a god amongst men. also i need to check things before posting! ;) thank you again for a awesome profile!
 
I am trying to load the Alliance SMV Questing profile and my Honorbuddy just says "Loading Profile..." and it doesnt continue or load :(
 
ectocooler said:
When I caught it, it was standing just off where Gazlowe and Thaelin are. Probably the scenario reset prior to that point, so I don't have a lot of information to help out.
Click to expand...
Thanks for the tip! I'll keep an eye out for these details while testing.
 
HunterDude said:
I am trying to load the Alliance SMV Questing profile and my Honorbuddy just says "Loading Profile..." and it doesnt continue or load :(
Click to expand...
How long as it said 'Loading Profile...' ?
Sometimes it will take the bot a bit of time before loading the profile and you'll have to wait a bit as the bot is checking a few things before starting.

Do you perhaps have a log of this?
 
It will say it forever as far as I know, I've let it go right now and its been 40 minutes :( The only thing it says in the log after I try and load the profile is "Changing current profile to [Fly][A - Quest] 90-92 SMV [Kick] ($Rev: 4639 $)" But it does not change or say anything else, or finish "Loading" the profile, or any profile from Kicks for that matter :(
 
HunterDude said:
It will say it forever as far as I know, I've let it go right now and its been 40 minutes :( The only thing it says in the log after I try and load the profile is "Changing current profile to [Fly][A - Quest] 90-92 SMV [Kick] ($Rev: 4639 $)" But it does not change or say anything else, or finish "Loading" the profile, or any profile from Kicks for that matter :(
Click to expand...
The log you see on Honorbuddy isn't as descriptive as the actual log that's being printed to your log folders.
So the ones in your log folders may be more informative as to what's going on.

Alternatively, you could always try a fresh install.
'Loading profile...' times have known to take some time in the past, but never longer than a minute.
 
Would the log be helpful to fixing this? Or just do a fresh install? I think I have tired that in the past.
 
HunterDude said:
Would the log be helpful to fixing this? Or just do a fresh install? I think I have tired that in the past.
Click to expand...
A log is always helpful. But if you don't want to bother with posting one - try a fresh install.
If it still occurs during the fresh install - then a log would definitely be needed.
 
HunterDude said:
View attachment 197107
Click to expand...
HunterDude said:
Is that it? :)
Click to expand...
Yup.

From the looks of the log, the bot is downloading the Mesh files. See image: http://azyul.com/l/05-15-26.jpg
Downloading of the Mesh files can take anywhere from seconds to minutes - depending on how far the bot is travelling.

Unfortunately there's no 'message' on the bot that says when the Mesh files are being downloaded, so to a user it just looks as if the bot is standing around doing nothing.
Alternatively can set your "logging" level to Diagnostic on the "Settings & Tools" menu - which that will make it show on your Log that the Mesh files are being downloaded.

Since the Mesh files are being downloaded, you may just have to wait.
If 10minutes pass and it still isn't moving, then report here again.
In that case, the issue may be a new bug that we've never encountered before - in which you'll need to post into the "Support Section" so the other moderators can help you.
 
I restarted HonorBuddy and tried it all over again after setting it to "Diagnostic". This is all it has said, I let it sit for 10 minutes and its still stuck at the last part :(

"Activity: Honorbuddy Startup Complete
Honorbuddy Startup Complete
Activity: Loading Profile...
Loading profile from store:///1-100 Questing Profile Pack/WoD/[Fly][A - Quest] 90-92 SMV [Kick].xml
Downloaded map SMVAllianceGarrisonLevel1
Downloaded map Draenor
Changed map(s) to SMVAllianceGarrisonLevel1, Draenor
Changing current profile to [Fly][A - Quest] 90-92 SMV [Kick] ($Rev: 4639 $)
BlackspotManager forcing unload of meshes - New profile loaded
[EnablePlugins-vUnknown(debug)] Database "ProfileCompatibilityInfo" has changed--re-reading.
[EnablePlugins-vUnknown(debug)] Database "ProfileCompatibilityInfo" re-read complete."
 
HunterDude said:
I restarted HonorBuddy and tried it all over again after setting it to "Diagnostic". This is all it has said, I let it sit for 10 minutes and its still stuck at the last part :(

"Activity: Honorbuddy Startup Complete
Honorbuddy Startup Complete
Activity: Loading Profile...
Loading profile from store:///1-100 Questing Profile Pack/WoD/[Fly][A - Quest] 90-92 SMV [Kick].xml
Downloaded map SMVAllianceGarrisonLevel1
Downloaded map Draenor
Changed map(s) to SMVAllianceGarrisonLevel1, Draenor
Changing current profile to [Fly][A - Quest] 90-92 SMV [Kick] ($Rev: 4639 $)
BlackspotManager forcing unload of meshes - New profile loaded
[EnablePlugins-vUnknown(debug)] Database "ProfileCompatibilityInfo" has changed--re-reading.
[EnablePlugins-vUnknown(debug)] Database "ProfileCompatibilityInfo" re-read complete."
Click to expand...
You may need to report this over to the support section then as it doesn't seem to be a profile-related issue.

Here's a link to it:
https://www.thebuddyforum.com/honorbuddy-forum/honorbuddy-support/

They'll want a full log as well.
 
You must log in or register to reply here.
Back
Top