[Zoinx] Sarkoth - Demon Hunter Guide

[foxxy12]

Can you maybe upload a complete order with your belga routineS?

 

[Zoinx]

The pathing is super slow now, and your DH combat routine that I'm using doesn't cast ANYTHING other than Ferrets at the start, and then just stands there. A little later it'll move to the scout spot, stand there. A little later (if it hasn't died to mobs), it'll either tp and exit, or go inside, and wait some more. Was easily making 300k/hr last night, changed to the new loot rules, and the new combat routine, and now it just casts Ferrets, no SS, nothing.

It needs to use SS to run faster and past the mobs at the beginning. It needs to not pause in certain spots for an extended period of time.

Nav server problem, not me.

 

[Rep91]

The pathing is super slow now, and your DH combat routine that I'm using doesn't cast ANYTHING other than Ferrets at the start, and then just stands there. A little later it'll move to the scout spot, stand there. A little later (if it hasn't died to mobs), it'll either tp and exit, or go inside, and wait some more. Was easily making 300k/hr last night, changed to the new loot rules, and the new combat routine, and now it just casts Ferrets, no SS, nothing.

It needs to use SS to run faster and past the mobs at the beginning. It needs to not pause in certain spots for an extended period of time.

I have the exact same problem

 

[Zoinx]

I have the exact same problem

New nav servers are out. Try it again.

Also, update the new Belphagor with my edited demonhunter.cs again as they didn't fix the changes yet.

 

[Djabber]

Somehow mine gets trapped in a vicious cycle where it resumes game and when spawns at checkpoint immediately tp's back to town and leaves game again.
Any idea why this happens? Help would greatly be appericiated!!!!!

 

[foxxy12]

I got the problem again

i put your demonhunter.cs file in my belphegor order start the bot new then i want to start the bot

not routines were loaded make sure .....


[19:22:15.236 N] Compiler Error: c:\Users\bbc\Desktop\kanackis\Neuer Ordner\Routines\Belphegor\Routines\DemonHunter.cs(54,91) : error CS1660: "lambda-Ausdruck" kann nicht in den Typ "int" konvertiert werden, da dies kein Delegattyp ist.
[19:22:15.236 N] Compiler Error: c:\Users\bbc\Desktop\kanackis\Neuer Ordner\Routines\Belphegor\Routines\DemonHunter.cs(63,33) : error CS1660: "lambda-Ausdruck" kann nicht in den Typ "int" konvertiert werden, da dies kein Delegattyp ist.
[19:22:15.236 N] Compiler Error: c:\Users\bbc\Desktop\kanackis\Neuer Ordner\Routines\Belphegor\Routines\DemonHunter.cs(67,33) : error CS1660: "lambda-Ausdruck" kann nicht in den Typ "int" konvertiert werden, da dies kein Delegattyp ist.
[19:22:15.236 N] Compiler Error: c:\Users\bbc\Desktop\kanackis\Neuer Ordner\Routines\Belphegor\Routines\DemonHunter.cs(71,33) : error CS1660: "lambda-Ausdruck" kann nicht in den Typ "int" konvertiert werden, da dies kein Delegattyp ist.
[19:22:15.236 N] Compiler Error: c:\Users\bbc\Desktop\kanackis\Neuer Ordner\Routines\Belphegor\Routines\DemonHunter.cs(78,33) : error CS1660: "lambda-Ausdruck" kann nicht in den Typ "int" konvertiert werden, da dies kein Delegattyp ist.
[19:22:15.236 N] Compiler Error: c:\Users\bbc\Desktop\kanackis\Neuer Ordner\Routines\Belphegor\Routines\DemonHunter.cs(82,33) : error CS1660: "lambda-Ausdruck" kann nicht in den Typ "int" konvertiert werden, da dies kein Delegattyp ist.
[19:22:15.236 N] Compiler Error: c:\Users\bbc\Desktop\kanackis\Neuer Ordner\Routines\Belphegor\Routines\DemonHunter.cs(86,33) : error CS1660: "lambda-Ausdruck" kann nicht in den Typ "int" konvertiert werden, da dies kein Delegattyp ist.
[19:22:15.236 N] Compiler Error: c:\Users\bbc\Desktop\kanackis\Neuer Ordner\Routines\Belphegor\Routines\DemonHunter.cs(91,29) : error CS1501: Keine ?berladung f?r die Methode "CastOnUnit" nimmt 2-Argumente an.
[19:22:15.236 N] Compiler Error: c:\Users\bbc\Desktop\kanackis\Neuer Ordner\Routines\Belphegor\Routines\DemonHunter.cs(92,29) : error CS1501: Keine ?berladung f?r die Methode "CastOnUnit" nimmt 2-Argumente an.
[19:22:15.236 N] Compiler Error: c:\Users\bbc\Desktop\kanackis\Neuer Ordner\Routines\Belphegor\Routines\DemonHunter.cs(93,29) : error CS1501: Keine ?berladung f?r die Methode "CastOnUnit" nimmt 2-Argumente an.
[19:22:15.236 N] Compiler Error: c:\Users\bbc\Desktop\kanackis\Neuer Ordner\Routines\Belphegor\Routines\DemonHunter.cs(94,29) : error CS1501: Keine ?berladung f?r die Methode "CastOnUnit" nimmt 2-Argumente an.
[19:22:15.236 N] Compiler Error: c:\Users\bbc\Desktop\kanackis\Neuer Ordner\Routines\Belphegor\Routines\DemonHunter.cs(97,29) : error CS1501: Keine ?berladung f?r die Methode "CastOnUnit" nimmt 2-Argumente an.
[19:22:15.236 N] Compiler Error: c:\Users\bbc\Desktop\kanackis\Neuer Ordner\Routines\Belphegor\Routines\DemonHunter.cs(98,29) : error CS1501: Keine ?berladung f?r die Methode "CastOnUnit" nimmt 2-Argumente an.
[19:22:15.236 N] Compiler Error: c:\Users\bbc\Desktop\kanackis\Neuer Ordner\Routines\Belphegor\Routines\DemonHunter.cs(99,29) : error CS1501: Keine ?berladung f?r die Methode "CastOnUnit" nimmt 2-Argumente an.
[19:22:15.236 N] Compiler Error: c:\Users\bbc\Desktop\kanackis\Neuer Ordner\Routines\Belphegor\Routines\DemonHunter.cs(100,29) : error CS1501: Keine ?berladung f?r die Methode "CastOnUnit" nimmt 2-Argumente an.
[19:22:15.236 N] Compiler Error: c:\Users\bbc\Desktop\kanackis\Neuer Ordner\Routines\Belphegor\Routines\DemonHunter.cs(54,136) : error CS0117: "Belphegor.Helpers.Common" enth?lt keine Definition f?r "IsElite".
[19:22:15.236 N] Compiler Error: c:\Users\bbc\Desktop\kanackis\Neuer Ordner\Routines\Belphegor\Routines\DemonHunter.cs(83,159) : error CS0117: "Belphegor.Helpers.Common" enth?lt keine Definition f?r "IsElite".
[19:22:15.236 N] Compiler Error: c:\Users\bbc\Desktop\kanackis\Neuer Ordner\Routines\Belphegor\Routines\DemonHunter.cs(87,155) : error CS0117: "Belphegor.Helpers.Common" enth?lt keine Definition f?r "IsElite".
[19:22:15.236 N] Compiler Error: c:\Users\bbc\Desktop\kanackis\Neuer Ordner\Routines\Belphegor\Routines\DemonHunter.cs(112,24) : error CS0117: "Zeta.CommonBot.GameEvents" enth?lt keine Definition f?r "OnPlayerDied".

 

[TC9869]

Any idea why it's not using Smokescreen to help move with the current version non vault?

Edit: I did a fresh install of the newest Nav Test 3 and copied over your new routine into Belphegor like you said

 

[flexkres]

+50000 rep i LOVE YOU!!!

im getting 570k gph on my dh now I LOVE YOU

 

[Zoinx]

Any idea why it's not using Smokescreen to help move with the current version non vault?

Edit: I did a fresh install of the newest Nav Test 3 and copied over your new routine into Belphegor like you said

I am making a SS version right now check back in about 30 minutes

 

[zygmunt]

Zoinx I agree with you to the point, that having more Gold Find percentage naturally increases the gph. However, I cannot spent 40mil on equip since I do not have that much gold ... the reason why I am botting in the first place.

So I spend around 200k to get items with goldfind on them, which I could affort. My current gf is plus around 200%.

Assuming i have to gold, you much would you send at most for 1% additional gf?

 

[Blindguard]

Tried multiple times now... whenever I start the bot it says "No routines were loaded. Please ensure there is a routine for your class before starting the bot. It works if I don't change the DemonHunter.cs or delete that profile and download another, using the original DemonHunter.cs works...

 

[Blindguard]

http://www.thebuddyforum.com/demonb...cond-nav-test-lot-combat-other-bug-fixes.html

How are we supposed to download that? It says I don't have permission
Edit: Never mind...

 

[Aegyo]

Open up the .cs file copy all and paste it in the .cs that works, profit.

 

[Blindguard]

Okay, I got it working with the new navtest, but everytime the profile vault, it walks back a few steps, lol.

 

[Zoinx]

Can anyone help me out with this:

Sarkoth Smoke Screen Farming

Trying to get it so say If portal is there cast Smoke Screen, followed by Preperation. The MoveTo from of Portal. Can't cast Smoke Screen right away cause it's on CD so calling UsePower right after MoveTo displays "Skill Not Ready". If I MoveTo a spot 2 seconds away to recast Smoke Screen before MoveTo from of portal is stops for split second to get to that MoveTo, then casts Smoke Screen then continues to Portal.

Trying to make it seamless, but can't get it to work. Any items?

<If condition="ActorExistsAt(176007, 2059.629, 2478.667, 27.02374, 15)">            
            <!-- Cast Smoke Screen followed by Preperation -->
            <UsePower questId="1" powerId="130695" />
            <UsePower questId="1" powerId="129212" />
        
            <!-- MoveTo followed by Smoke Screen -->
            <MoveTo questId="1" x="2067.329" y="2517.266" z="27.1" pathPrecision="5" />
            <UsePower questId="1" powerId="130695" />
            
            <!-- MoveTo front of Portal-->
            <MoveTo questId="1" x="2067.5" y="2480" z="27.10001" pathPrecision="5" />

 

[Rayli89]

can someone help me the non vault demon hunter routine does not work for me!
everytime i open demon buddy i see a huge load of errors on the log and it says i have no routine loaded

 

[Fereh]

DemonHunter.cs(99,29) : error CS1501: No overload for method 'CastOnUnit' takes 2 arguments

Keep getting this error, tried to update with the nav3 version, still ended up getting it.
I've changed the Belphegor , demon hunter.cs thrice no with no luck

 

[osgamingmmo]

[15:32:23.492 N] Current Gold per Hour: 603517

With 288% Gold Find, 298 with Ferrets. No Movement Speed, No Radius.

 

[DroidFanBoyJP]

[15:32:23.492 N] Current Gold per Hour: 603517

With 288% Gold Find, 298 with Ferrets. No Movement Speed, No Radius.

And you said better gear wouldn't make that big of a difference =).

 

[DroidFanBoyJP]

Just started running it again, running smoother with no build, but still not casting SS for speed boost, or anything other than Ferrets, unless it gets hit.