TuanHA Paladin - The Ultimate Experience

[xxrazorxx]

Routine randomly stops

This log was taken from an encounter with Thok but this the routine is stopping on every encounter so far and have to use the public version instead, obviously the performance is far less than the SE.

I hope you manage to ge to the bottom of this problem Tuahna, its an incredible routine when it works properly.

I did a fresh install of HB for this encounter and using the latest Tyrael build, I use several other routines for other toons and don't get any of the above issues.

 

[mcdeman]

still I need stop cast support on the boss of Thok the Bloodthirsty - NPC - World of Warcraft, CR stops when the boss uses a spell too often, Taunaha, plz add to stop cast spell of Deafening Screech - Spell - World of Warcraft
at Milz [Demonic], CR perfectly reacts to this ability, add also you please, it is very important.

 

[Stjarne]

Thanks alot for the answer! I Will try it out! Tuanha!

 

[icheatedlol]

This log was taken from an encounter with Thok but this the routine is stopping on every encounter so far and have to use the public version instead, obviously the performance is far less than the SE.

I hope you manage to ge to the bottom of this problem Tuahna, its an incredible routine when it works properly.

I did a fresh install of HB for this encounter and using the latest Tyrael build, I use several other routines for other toons and don't get any of the above issues.

It's been doing this for quite a while, the only way to fix it is to stop honorbuddy, close it, reopen it, select routine and start it again. Manually healing in between this all loading. I'd suggest putting a HB icon on your taskbar and not playing full screen to make this quicker. It also helps to customize your UI the way you would as if you never had a bot (never hurts to assist the bot for higher numbers anyways).

still I need stop cast support on the boss of Thok the Bloodthirsty - NPC - World of Warcraft, CR stops when the boss uses a spell too often, Taunaha, plz add to stop cast spell of Deafening Screech - Spell - World of Warcraft
at Milz [Demonic], CR perfectly reacts to this ability, add also you please, it is very important.

Actually, it's not very important at all, the cr would basically have to stop casting completely between 10-20+ screech, dropping hps massively. Your raid should be chaining devos etc to avoid having to stop casting. You could even jump/move to avoid getting interrupted, however I play as SH and rarely ever get interrupted here, even when it makes it to 20+ screeches.

If this CR stops casting for anything I'll be disappointed.

PS If anyone is using this CR to blanket 1hp Eternal Flames you're failing, it's nerfed, and it is most likely the reason your heals are slacking. I'd suggest actually reading about your class.

 

[rcadams]

Hmm why doesn't this Combat Routine kill mobs anymore? I was using FULL AFK, RET Pally and it just sits there and kills nothing when my toon enters combat.

From looking at the logs does the CR think the mob is the pally's pet? I see it blacklisting

 

[Mario27]

tuanha your cc have issue agains mages sorry to say but yesterday i was playing 3 s and when we where all low he didnt casted for a few seconds anything we almost died please check the spells of the mage if he can handle that i wil send a log now i think those guys knows you cc have issue because they wil cast spells what makes your cc slow. you know i love paladins it was my main since vanilla but this makes me angry because it keeps standing and waiting for a few seconds i have the lates speciel edition update and then when we almost dead he starts healing when its to late this makes me go lvl a mage and try millz cr or a warrior it has something to do with mage they make you cr verry slow with alter time that bomb spell or something and then when we almost dead its some times to late with healing also when he uses frozen orb and alter time or what it is it make you cr laggy i hope u fix that sometimes so i dont need to lvl my mage or warrior

 

[icheatedlol]

tuanha your cc have issue agains mages sorry to say but yesterday i was playing 3 s and when we where all low he didnt casted for a few seconds anything we almost died please check the spells of the mage if he can handle that i wil send a log now i think those guys knows you cc have issue because they wil cast spells what makes your cc slow. you know i love paladins it was my main since vanilla but this makes me angry because it keeps standing and waiting for a few seconds i have the lates speciel edition update and then when we almost dead he starts healing when its to late this makes me go lvl a mage and try millz cr or a warrior it has something to do with mage they make you cr verry slow with alter time that bomb spell or something and then when we almost dead its some times to late with healing also when he uses frozen orb and alter time or what it is it make you cr laggy i hope u fix that sometimes so i dont need to lvl my mage or warrior

Man, that sentence tho!

Anyways, speaking from the common user standpoint (I am no beta tester), you start the bot out - a beta version at that - at a whopping 100 TPS. You then proceed to change Tyrael to an incredible 200 TPS, as if this would speed things up for you (maybe even double?) Your bot then proceeds try extremely hard to do everything it possibly can to cast even instant heals, which it has a hard time doing, because it's probably being overloaded, just a tad.

Try running a stable version. Try using the settings the CR is built for. Try using settings your computer can actually handle. Being a "beta tester" doesn't mean fuck shit up and then blame developers for having a faulty product, it simply means you have downloaded a beta version and used it. Now stop being a retard about it and think for a second, or an hour or 2 if you need to.

Sorry for the sarcasm, but your posts here amaze me sometimes.

Also, your usage of major glyphs for arena gave me a good laugh, specifically the Divine Shield one. It also appears you're using the auto-beacon setting without glyphing it.

 

[Mario27]

Man, that sentence tho!

Anyways, speaking from the common user standpoint (I am no beta tester), you start the bot out - a beta version at that - at a whopping 100 TPS. You then proceed to change Tyrael to an incredible 200 TPS, as if this would speed things up for you (maybe even double?) Your bot then proceeds try extremely hard to do everything it possibly can to cast even instant heals, which it has a hard time doing, because it's probably being overloaded, just a tad.

Try running a stable version. Try using the settings the CR is built for. Try using settings your computer can actually handle. Being a "beta tester" doesn't mean fuck shit up and then blame developers for having a faulty product, it simply means you have downloaded a beta version and used it. Now stop being a retard about it and think for a second, or an hour or 2 if you need to.

Sorry for the sarcasm, but your posts here amaze me sometimes.

Also, your usage of major glyphs for arena gave me a good laugh, specifically the Divine Shield one. It also appears you're using the auto-beacon setting without glyphing it.

my pc can handle alot i have a fast pc its the code that stops healing some time and for one thing i know for sure its the code. and im not blaming on tuanha but he should fix the slownes im not the only one who has those issue i know alot of people who have the same issue with the monk and others. and maybe my english sentence isnt great did u seen my location my english speaking isnt that great and since alot of people have the slownes downside when getting pressure and you not maybe you just denying it but alot of people have issue and why are you laughing at my english post if i could use my own language it would be mutch better i know eternal flame is on 3 blanket better but its just tuanha code that is slacking sometimes

 

[mcdeman]

It's been doing this for quite a while, the only way to fix it is to stop honorbuddy, close it, reopen it, select routine and start it again. Manually healing in between this all loading. I'd suggest putting a HB icon on your taskbar and not playing full screen to make this quicker. It also helps to customize your UI the way you would as if you never had a bot (never hurts to assist the bot for higher numbers anyways).



Actually, it's not very important at all, the cr would basically have to stop casting completely between 10-20+ screech, dropping hps massively. Your raid should be chaining devos etc to avoid having to stop casting. You could even jump/move to avoid getting interrupted, however I play as SH and rarely ever get interrupted here, even when it makes it to 20+ screeches.

If this CR stops casting for anything I'll be disappointed.

PS If anyone is using this CR to blanket 1hp Eternal Flames you're failing, it's nerfed, and it is most likely the reason your heals are slacking. I'd suggest actually reading about your class.

I would know English in an ideal, I would tell you who here the father, dude. I read your nonsense, and I understand that you in the paladin full dniwwe..

 

[icheatedlol]

my pc can handle alot i have a fast pc its the code that stops healing some time and for one thing i know for sure its the code. and im not blaming on tuanha but he should fix the slownes im not the only one who has those issue i know alot of people who have the same issue with the monk and others. and maybe my english sentence isnt great did u seen my location my english speaking isnt that great and since alot of people have the slownes downside when getting pressure and you not maybe you just denying it but alot of people have issue and why are you laughing at my english post if i could use my own language it would be mutch better i know eternal flame is on 3 blanket better but its just tuanha code that is slacking sometimes

I think it's safe to say most of us here play on fast pcs. Do you average 200 FPS in the middle of an arena match? I highly doubt it, therefore you shouldn't be running the bot at 200 TPS. I play at 30 tps whether my fps is 100 or not in game. I'm currently between 2100-2400cr in every arena and rbgs, 11/14H in SoO, and have one of the highest world rankings in proving grounds - using the same CR you're using.

I would know English in an ideal, I would tell you who here the father, dude. I read your nonsense, and I understand that you in the paladin full dniwwe..

 

[Insanityy]

I think it's safe to say most of us here play on fast pcs. Do you average 200 FPS in the middle of an arena match? I highly doubt it, therefore you shouldn't be running the bot at 200 TPS. I play at 30 tps whether my fps is 100 or not in game. I'm currently between 2100-2400cr in every arena and rbgs, 11/14H in SoO, and have one of the highest world rankings in proving grounds - using the same CR you're using.

^this i only ever set it to max 30 TPS..
unless im drunk XD

 

[icheatedlol]

After some excruciating research, I came across this on Page 1.

QUESTIONS AND ANSWERS​

Tyrael with the following settings

...and then, I found this.

What should I do with the Ticks per Second?
Ticks per Second should be about equal or less of which your FrameRate (CTRL+R to view in WoW) is. If your PC can handle it, the higher the TPS the better your Routine will work. It's just very minor difference above 30 though.

So if your WoW never goes below 60 FPS, set Tyrael to 60 TPS. If your WoW never goes under 45, set it to 45. Test it in a heavy raid environment, cause flying around your FPS is probaly ALOT higher then in raids during bossfights.

What should I do with the LockSelector?
It should be enabled, as it improves the performance of your CR. If it drops the framerate too much, the combat routine you use probaly does not support a framelock. Disable it then. Prime examples of LockSelector supported routines are listed here.

 

[tuanha]

Guy, please do not set FPS above 30 at least in PvP

CR already too fast and if you set it too high, there's a chance that CR dispel something BEFORE you event see it...

I'm working on a delayed (slow down) CR on dispelling but in the mean time 30 FPS is already VERY good...

 

[Mario27]

I think it's safe to say most of us here play on fast pcs. Do you average 200 FPS in the middle of an arena match? I highly doubt it, therefore you shouldn't be running the bot at 200 TPS. I play at 30 tps whether my fps is 100 or not in game. I'm currently between 2100-2400cr in every arena and rbgs, 11/14H in SoO, and have one of the highest world rankings in proving grounds - using the same CR you're using.

so you never have issue when you play agains mages when you all kinda low he starts healing within a few seconds later when its to late?

 

[Mario27]

Guy, please do not set FPS above 30 at least in PvP

CR already too fast and if you set it too high, there's a chance that CR dispel something BEFORE you event see it...

I'm working on a delayed (slow down) CR on dispelling but in the mean time 30 FPS is already VERY good...

afther tomorow patch i wil try 30 then i have alot of people on outland ally eu that wanna play with me but i get annoyed with the slownes sometimes disdpelling is ok you should check the healing code where it heals agains mages where it sometimes slow down

 

[icheatedlol]

so you never have issue when you play agains mages when you all kinda low he starts healing within a few seconds later when its to late?

Never. I really believe a lot of your issues are coming from your personal settings specifically...I have a computer with literally "top of the line" everything, and I use 30 tps. I also don't put my full trust in the CR during arena, I often find myself manually healing along with the CR just to ensure things are going ok. You were running auto beacon, and you didnt have it glyphed, right? I can see this because it would otherwise not beacon you at all in the opener. Here's yet another one of your problems with the CR bugging. aka "the slowness."

Your mage problems probably consist of you using 200 tps and not glyphing beacon of light while running auto beacon. It's trying to switch beacons to your damaged teammate, (while it's actually globaled itself in this process and cannot do this, because it's not glyphed, adding seconds of doing nothing.) It's processing at 200 tps so it tries to holy shock 15 times without success, bogging it down, it's also processing dispels at the same time at 200 tps, all of this making your logs an overall shit show.

Yes, I still see an issue with the CR hitting bugs and then not healing, casting random ass heals, or saving mana when I'm sitting at 100% mana, etc. This has been happening a lot less to me recently though. I believe this is also an issue with the CR getting ahead of itself, because it's already fast as hell (faster than an human could ever be) at 30 tps. This was not the issue with your logs however.

I also have an issue with it using both Hand of Sacrifices at once while Clemency talent is active in arena, eliminating the purpose of using this talent. It also does something impossible with Light's Hammer and Binding Shot, placing it 6 foot high in the air while player is moving.

 

[Mario27]

afther the new patch on eu i wil put it on 30 tps and see how it goes then if i want a fast interupt from tuanha cc do i need to make it 1500ms?

 

[icheatedlol]

afther the new patch on eu i wil put it on 30 tps and see how it goes then if i want a fast interupt from tuanha cc do i need to make it 1500ms?

I leave mine at 500ms, but if u want to be an obvious botter in arena then yes, 1500ms.

 

[Mario27]

I leave mine at 500ms, but if u want to be an obvious botter in arena then yes, 1500ms.

ye i want it to be fast so i wil do 1500 because on outland eu ally where i play evryone does the interupt bot so i wil make it fast to why is 1000 standard slow and 1500 ms quicker?

 

[icheatedlol]

ye i want it to be fast so i wil do 1500 because on outland eu ally where i play evryone does the interupt bot so i wil make it fast to why is 1000 standard slow and 1500 ms quicker?

1000ms means it will interrupt with 1 second left in the cast. If the cast is a 1 second cast it will automatically interrupt them. So, 1500ms will instantly interrupt anything less than a 1.5 sec cast.

In your case I'd make it 10,000ms.