What's new
By:
  • Visit Rebornbuddy
  • Visit Panda Profiles
  • Visit LLamamMagic
  • Visit Resources
  • Visit Downloads
  • Visit Portal

Siege Camp Chest Runner v3.0

Bishop007

Bishop007

New Member
Joined
Aug 1, 2013
Messages
111
Reaction score
3
Siege Camp Chest Runner v3.0

Please attempt to keep this thread on topic and feedback constructive.

Requirements:
  1. Latest stable version of Trinity & QuestTools.
  2. Latest stable version of DemonBuddy.
  3. Kill Malthael quest in campaign mode.
*Older versions may work but will not be supported.

How to use:
  1. Make sure the bot is stopped and DB is closed.
  2. Copy "Chest Runner v3.0.xml" into ../Demonbuddy/Profiles/
  3. Start up the bot and change Trinity's and DB's settings using the recommendations below.
  4. Make sure you have kill Malthael quest in campaign mode.
  5. Start up the bot.

Required Trinity Settings:
  • Objects: Have all container boxes UNCHECKED* and select "Skip Destructibles Unless Stuck".

Recommended DB Settings:
  • These can revert back to defaults when you exit the program. Always check before starting the bot.
  • Set "Game Wait Time" to a lower number. I use 3-6.
  • Change game difficulty to Torment6.

Credits:
CaptainAmerica - original profile
 

Attachments

Last edited:
here are some of the recommended builds and gear along with some other info that might be helpful, if you feel this doesnt need to be here Bishop007 please let me know and ill delete it not trying to add info you dont want in your thread


Hardcore Tip:
The towers inflict Arcane damage despite it appearing as fire. Wearing the 'Countess Julia's Cameo' amulet makes this profile 100% safe.
Credit to ossoble for this valuable tip!

Class Specific Suggestions:
This will only manipulate games per hour, not the ability for this profile to function.

Witch Doctor: (Patch 2.0.5.24017)

Trinity:
Combat/Misc: Check 'Use movement spells Out of combat'

Skills/Passives
Horrify w/ Stalker
Spirit Walk w/ Jaunt
Hex w/ Angry Chicken
Passive: Tribal Rites
Passive: Spirit Vessel
Passive: Fierce Loyalty w/ Zombie Dogs Thanks Why Butter

Recommended items:
Shukranis Triumph
Thing of the Deep
Warzechian Armguards
Fire Walkers
Goldskin
Note: If using Shukranis Triumph, do not use Horrify,as it can remove the spirit walk, resulting in a loss of movement speed. Thanks steffokeffo.

Monk: (Patch 2.0.5.24017)

Trinity:
Combat/Monk: Check 'Tempest Rush: Movement Only'

Skills/Passives: By foey.
Tempest Rush w/ Tailwind
Tempest Rush w/ Northern Breeze using 'Warstaff of General Quang'
Dashing Strike w/ Quicksilver
Mystic Ally w/ Air Ally
Mantra of Healing w/ Circular Breathing
Passive: Exalted Soul
Passive: Fleet Flooted
Passive: Beacon of Ytar (for Dashing strike users)
Passive: Chant of Ressonance

Recommended items:
Warstaff of General Quang
Warzechian Armguards
Fire Walkers
Goldskin

Wizard: (Patch 2.0.5.24017)

Trinity:
Combat/Misc: Check 'Use movement spells Out of combat'

Skills/Passives: By Aazaroth.
Teleport w/ Wormhole
Diamond Skin w/ Sleek Shell
Ice Armor w/ Frozen Storm
Passive: Illusionist
Passive: Evocation

Recommended items:
Warzechian Armguards
Fire Walkers
Goldskin

Crusader: (Patch 2.0.5.24017)

Trinity:
Combat/Misc: Check 'Use movement spells Out of combat'
Combat/Crusader: Uncheck 'Use Steed Charge OOC'
Combat/Crusader: Check 'Use Akarats off CD'

Skills/Passives:
Steed Charge w/ Endurance
Laws of Hope w/ Wings of Angels
Akarat's Champion w/ Embodiement of Power
Passive: Lord Commander
Passive: Long Arm of the Law

Recommended items:
Warzechian Armguards
Fire Walkers
Goldskin
Swiftmount

Barbarian: (Patch 2.0.5.24017)

Trinity:
Combat/Misc: Check 'Use movement spells Out of combat'
Combat/Barbarian: Check 'Out of Combat Only w/ When to use Sprint'
Combat/Barbarian: Check 'Use When not on Cooldown'

Skills/Passives:
Warcry w/ Charge.
Sprint w/ Marathon.
Wrath of The Berserker
Passive: Unforgiven

Recommended items:
Warzechian Armguards
Chilanik's Chain
Fire Walkers
Goldskin

Demon Hunter: (Patch 2.0.5.24017)

Trinity:
Combat/Misc: Check 'Use movement spells Out of combat'
Combat/Demon Hunter: Check 'Spam Smoke Screen'
Combat/Demon Hunter: Check 'Preparation Out of Combat'
Combat/Demon Hunter: Check 'Anytime' w/ When to use Vault

Skills/Passives: By shuvit.
Smokescreen w/ Displacement
Vault w/ Tumble
Preparation w/ Invigoration
Companion w/ Ferret
Passive: Tactical Advantage
passive: Perfectionist

Recommended items:
Warzechian Armguards
Fire Walkers
Goldskin
 
Last edited:
Appreciate the input. BTW, the attached version of TrinityOOCToggle.cs does not support out of combat movement for monks. If anyone has any feedback on implementation it would be helpful as I do not have a monk to test with.
 
Playing on a Crusader, and it could use Steed Charge more than twice per run (maybe even 4-5 times because of CDR). Anyway you can add this?

It also doesn't - as the guy above stated for monks - support using Steed Charge OOC. It will leave game immidiately if toggled.

The bot also pauses for 1 second in front of each chest instead of just opening and running off like the original CaptainAmerica profile.

A small thing: I don't think 3000 ms wait time is needed when entering waypoint. 500 is fine (like old profile).

Good work updating it, hope you can use this feedback, looking forward for improvements.
 
Last edited:
krislicoque said:
Playing on a Crusader, and it could use Steed Charge more than twice per run (maybe even 4-5 times because of CDR). Anyway you can add this?

The bot also pauses for 1 second in front of each chest instead of just opening and running off like the original CaptainAmerica profile.

Good work updating it, looking forward for improvements.
Click to expand...

As far as Steed Charge is concerned, if it is active when you get to a chest this causes issues with the interaction process. I can run some additional tests and see if I can get at least one more application in. The pause that you see is part of the "MoveToActor" function that has replaced the now depricated "TrinityInteract" function. I'm not sure that there is anything I can do as far as that delay is concerned, but I will look into it.
 
I have been running it for a few and seems there is a 2-3 sec delay before opening chest, and some times starts to run before loot drops and has to backtrack, can anyone else confirm i might be lagging. The pause at chest is decreasing gph by about 5-6 went from 53 to 48 so if theres a fix for it awesome anyhow thanks for picking up the profile.
Barb is working fine for me.
 
Last edited:
I'm sure the backtracking is intended, as there is no need to wait for the chest to open as is MOST CASES there won't be a legendary, and you're better off backtracking a few times instead of waiting for a few seconds at every chest.

I changed the 3000 delay to 500 after entering the waypoint and it's working great and much faster.
 
Bishop007 said:
As far as Steed Charge is concerned, if it is active when you get to a chest this causes issues with the interaction process. I can run some additional tests and see if I can get at least one more application in. The pause that you see is part of the "MoveToActor" function that has replaced the now depricated "TrinityInteract" function. I'm not sure that there is anything I can do as far as that delay is concerned, but I will look into it.
Click to expand...
Alright. As for Steed Charge, I think there is room for one more (if you have the CDR) after the 2nd chest running up the stairs. Not sure it will work, if you don't have enough (50%+ CDR).
 
xxxmalicexxx said:
I have been running it for a few and seems there is a 2-3 sec delay before opening chest, and some times starts to run before loot drops and has to backtrack, can anyone else confirm i might be lagging. The pause at chest is decreasing gph by about 5-6 went from 53 to 48 so if theres a fix for it awesome anyhow thanks for picking up the profile.
Barb is working fine for me.
Click to expand...

Would you mind checking your Object settings for me and let me know what your "wait delay after opening container" setting is at? Set it to "0" if it is not already there and let me know if that has an effect.
 
krislicoque said:
I'm sure the backtracking is intended, as there is no need to wait for the chest to open as is MOST CASES there won't be a legendary, and you're better off backtracking a few times instead of waiting for a few seconds at every chest.

I changed the 3000 delay to 500 after entering the waypoint and it's working great and much faster.
Click to expand...
where do you change the delay at.
 
Change your code in the profile to look like this:

Code: 
<!-- The Survivors' Enclave -->
    <If condition="Me.IsInTown==True">
      <TrinityOOCToggle SetTrue="false" />
	    <UseWaypoint waypointNumber="8" questId="1"/>
	    <WaitTimer questId="1" stepId="1" waitTime="500" />
    </If>
 
Bishop007 said:
Would you mind checking your Object settings for me and let me know what your "wait delay after opening container" setting is at? Set it to "0" if it is not already there and let me know if that has an effect.
Click to expand...
it was at 500 i set it to 0 but there is still the delay before opening the chest 2 sec delay basicly
 
xxxmalicexxx said:
it was at 500 i set it to 0 but there is still the delay before opening the chest 2 sec delay basicly
Click to expand...

Okay, then it is not profile related. There must be a delay associated with the "MoveToActor" function and chest interactions. rrix would be in a better position to clarify if this is indeed the case.
 
Bishop007 said:
Okay, then it is not profile related. There must be a delay associated with the "MoveToActor" function and chest interactions. rrix would be in a better position to clarify if this is indeed the case.
Click to expand...
its probably somthing with the change from trinity 1.97 to 1.98 because i have the most success atm with .97, with using the new DB and new trinity i get the delay.
 
Does the profile seem to run okay with Trinity 1.97? I'm sitting at 45-50 gph after running today for almost 8 hours with Trinity 1.98 and I haven't had any issues to speak of.
 
i tried runnin this profile with 1.97 and it doesnt work it stalls 1.98 it runs fine i get about 45-48 gph its a little down from the games i was getting 52-56 but im sure its just the pause at the chests. that is with a barb
 
i‘ve uncheck all open container option，and it does not open ground container
if i should check that option？
 
SEV3N said:
i‘ve uncheck all open container option，and it does not open ground container
if i should check that option？
Click to expand...

If you want it to open ground containers, then yes check off just that option. Leave the chests unchecked.
 
This has to do with Trinity 1.98. I have posted this profile in an effort to simplify it's use going forward. Feel free to use whatever works for you :)
 
You must log in or register to reply here.
Back
Top