ShaneMag85's Large Dinosaur Bone Grind

[P_dey]

add a vendor pls...

Allance vendor:
<Vendor Name="Agrant Scharfschuss" Entry="70030" Type="Food" X="6062.477" Y="1370.852" Z="88.56878" />
<Vendor Name="Agrant Scharfschuss" Entry="70030" Type="Vendor" X="6062.477" Y="1370.852" Z="88.56878" />
<Vendor Name="Agrant Scharfschuss" Entry="70030" Type="Repair" X="6062.477" Y="1370.852" Z="88.56878" />

tryed myselfe to create a profile but it will pull the BIG ones.. and will die ^^

 

[P_dey]

verry often sprining around in circles
Human DK

otherwise good profile .. no big pulls

BUT
pls remove the waiting time on every spot and the spinning in circles
that looks FU**ING botlike...

 

[khuong]

just fyi, looking "botlike" is mainly due to the fact.. that you're using a bot.

 

[mYru]

I'm running this profile as Windwalker monk and it works great for me, i managed to get around 300-400bones/h in the middle of night with 1.5. I just have 1 problem -> My bot tries to use flying mount all the time and i can see "you can't use that here" communicate on my screen. I've tried all the setting (auto, random mod, typing name of ground mount in flying mount area, also ground mount farming mode doesn't wark). 1.7 is stuck at 2 trees btw, you gotta check that

Thumbs up for that profile anyway!
Edit: 1.6 is also getting stuck at 1 tree

 

[ShaneMag85]

I'm running this profile as Windwalker monk and it works great for me, i managed to get around 300-400bones/h in the middle of night with 1.5. I just have 1 problem -> My bot tries to use flying mount all the time and i can see "you can't use that here" communicate on my screen. I've tried all the setting (auto, random mod, typing name of ground mount in flying mount area, also ground mount farming mode doesn't wark). 1.7 is stuck at 2 trees btw, you gotta check that

Thumbs up for that profile anyway!
Edit: 1.6 is also getting stuck at 1 tree

Yes ive no idea why it will only mount flying mounts, i believe something to do with the bot thinking your in kunlai and not realising flying mounts cant be used, but these areas are fairly new so im sure this issue will be fixed in a later HB release. I just use a mount that looks like something a non botter would use, so im using the flying disc mount. as for those with spinning issues, i get that too, again not something that's written into the profile and possibly due to the bad mesh on the island as there are other mesh issues on the island, and not something i can prevent in the profile, hopefully newer HB releases will solve this. As for the tree stuck bits, i think i know where you mean and i will address this issue with the next release, just use a working one for now. My bot usually runs around the trees by itself. With it being the weekend too many people are camping the island and i cant really make many changes. so a new release might not appear til Monday. Will try Sunday night, might quiet down a bit then.

 

[ShaneMag85]

verry often sprining around in circles
Human DK

otherwise good profile .. no big pulls

BUT
pls remove the waiting time on every spot and the spinning in circles
that looks FU**ING botlike...

all the wait times are removed, this happens because the bot goes to hotspot, then clears any current targets, then selects your new target, then uses a ranged ability. and this IS written into the profile. The reason for this is simple. with no waits the bot most of the time runs straight past mobs no matter how big the pull distance is and you end up going the next hotspot and then pulling a second, sometimes even a third dino all at once. This was written into the profile to prevent this from happening so lower gears chars can use this profile. This is why you should only use this profile during quieter hours hope this helps.

 

[jazo]

this is a good profile but its trying to mount flying mount while in the bot setting i checked ground mount farming mo

 

[Jimbo]

The reason for this is simple. with no waits the bot most of the time runs straight past mobs no matter how big the pull distance is and you end up going the next hotspot and then pulling a second, sometimes even a third dino all at once.

Sadly 1.7 beta seems to be doing -exactly- this

 

[ShaneMag85]

this is a good profile but its trying to mount flying mount while in the bot setting i checked ground mount farming mo

Unfortunately this is something i cannot prevent in the profile, this is a HB issue. Hopefully it will be fixed in a later release. there are some flying mounts which can be used such as gryphons, flying discs.

Sadly 1.7 beta seems to be doing -exactly- this

Thanks for the report, will take a look. just use the 1.6 for now, Ive only put 1.7 up as beta because i haven't had time to test it myself so at this point 1.6 will probably work better

 

[Bhikkus]

Nice one, works fine for my Blood dk(ilvl 478). He is able to fight against 2 at once. Somehow Unholy-Dk dies all time against only one dino :X

 

[Filfa]

Been running 1.5 w/Timers for a few hours here and there bit slow for my liking, could be Oondasta groups killing me... sigh

About to test out 1.7

Regarding mount, I could not get it to default mount a ground only mount, although I was able to force it to mount Ebon Gryphon (ID 32239), I also assume this will work with most hybrid ground/flying mounts basically other than drakes; through the HB settings:
Use mount ticked

Ground - 32239
Flying - 32239
Random, Automatic and native flying unticked.

By default it tries to mount Albino Drake

There's a whole island of these hatchlings, is there a better place than on the beach?

Edit: Started up 1.7 and it goes a lot further c: ty

 

[timglide]

Please have a look at my new plugin that can wait for Triple Puncture to fall off when out of combat.
[thread=112789]WaitForDebuff[/thread]

 

[HCorbear]

Works great until it goes to repair. It will mount, start running to Kun-Lai, and die because of fatigue from the water. Maybe it'll be better if you could use the FP whenever the bot needs to go repair. There's one that goes from Isle to White Tiger Temple, and there's a repair not too far away from that.

Other than dying from fatigue, this profile is amazing! Thanks a lot!

 

[pajay]

Great profile, thanks!

 

[ShaneMag85]

Works great until it goes to repair. It will mount, start running to Kun-Lai, and die because of fatigue from the water. Maybe it'll be better if you could use the FP whenever the bot needs to go repair. There's one that goes from Isle to White Tiger Temple, and there's a repair not too far away from that.

Other than dying from fatigue, this profile is amazing! Thanks a lot!

Hmmm have you got use flight points checked in settings? my bot flys to kunlai to repair using fp.

 

[yousef]

hi Thanks a lot for this file its wondrous i use 1.7 on my Drude Guardian its doing very good Thanks again

 

[maxeldon1]

Nice profile - but is there a way to not abandon the target if some other player joins in on the kill? If i start killing, and someone else targets my NPC - the char just runs off and looks really bottish..

 

[HCorbear]

Hmmm have you got use flight points checked in settings? my bot flys to kunlai to repair using fp.

Awesome! It works 100% now.. It took FP when I needed to repair and flew right back to start getting bones. Have about 7k bones right now after 2 days of use. I will be getting the mount soon! Thanks again!

 

[Showtyro]

Great profile, it does the job but ive noticed some issues with it.
I have been using 1.7 beta and then switched to 1.6 (no timers) on DK and Hunter both with full malevolent gear.
First problem ive encountered is that when someone else is trying to help, the bot will stop fighting the mob and move to his next spot.
Second problem is that in the area with the blue dinos, it will try to walk through the big bones getting stuck for 20 seconds, it dismounts then goes around.
Third problem and most serious is that the bot has a very odd way of moving around both on foot and on mount. Basically it runs straight and while running it stops on a spot for a second, but its legs keep moving in the air, then continues and stops again and so on. You cannot see this issue on the bot screen, but if you log on another account and follow it, you will see this weird thing. Draws a lot of attention and probably gets you reported also.

 

[Snewzen]

I've tried to use this, but my bot just wants to go in Flight Form, and runs right into the big dinos. Any idea on what to do? Do I have to start it at some specific place?