ShamWOW for HB2 - An Enhance/Elemental/Resto + PVP/RaF Healbot by Bobby53

[hbaioni]

Hey Bobby, I just wanted to thank you for the best CC EVER. I'm always the top healer in LFR and Guild Runs... And it handles my mana exceptionally well. None of the other healing CCs work like this one in terms of hps and mana handling... This is godlike!!! (i wish you could code something like this for priests and paladins... hehe... just kidding!).

A quick question: Are you going to update it for MoP? (when the time comes, of course, not now)

 

[bobby53]

HonorBuddy Mode: Grind/PVP/Mixed/Quest/RaF
Shamans Location: PVP (Enhance Shaman)
What should have happened (be specific): Cast water walking and buffs ONCE then go and fight.
What did happen (be specific):Continously casting Water walking and ghost wolf over and over. Also when he sees combat hell stop, cast ghostwolf then stop, then cast ghostwolf, then target mob and then go back ghostwolf over and over. Sometimes he might run to the target and kill. Also hell run to target well atleast 40 yards away then cast spirit wolves then cast ghostwolf then shiftform again and cast something like frostshock then ghostwolf again. Would be nice if it'll run smoothly but im no coder.
Computer time of problem or log mark (not realm time): 10:30Pm View attachment 46198

tentiontwooone, Thanks for posting and providing a complete debug log. The problem you are encountering is due to having an extremely old version of ShamWOW that is no longer supported. The relevant line from your log file:

[10:09:58 PM:210] Chose ShamWOW v4.3.15 by Bobby53 as your combat class!

There have been 26 releases since then with the most recent being 4.5.21. ShamWOW 4.3.15 has unforutnately been bundled by the Buddy team with HonorBuddy, so any time you make a fresh install or you update of HonorBuddy you will need to re-install ShamWOW. Be certain to follow the instructions in the ShamWOW FAQ regarding installation so you extract all contents and not just the ShamWOW folder. Thanks for the post and good luck with your Shaman, Bobby53

 

[pkinrules]

Hi Bobby, i tried this in LFR and i noticed that whilst moving it did not cast any healing spells.I made sure Spiritwalker's Grace was used but it didnt change anything.

 

[tentiontwooone]

Thnx budd ur a champ. +1

 

[bobby53]

Hi Bobby, i tried this in LFR and i noticed that whilst moving it did not cast any healing spells.I made sure Spiritwalker's Grace was used but it didnt change anything.

pkinrules, Thank you very much for the post and complete debug log file. Currently the only support for Spiritwalker's Grace is casting for the haste buff as part of the T13 bonus. However, I had already begun adding support for allowing casting while moving if Spiritwalker's Grace is active or the Glyph of Unleashed Lightning is slotted in the next release. It will take sometime for me to complete however as it required some fairly extensive changes for this and some other improvements. Hopefully it will be worth the wait. In the meantime, should you need to cast Spiritwalker's Grace to allow casting while moving, you can manually cast spells while it is active without interruption from ShamWOW. Thanks again for the post and good luck with your Shaman, Bobby53

 

[bobby53]

Hey Bobby, I just wanted to thank you for the best CC EVER. I'm always the top healer in LFR and Guild Runs... And it handles my mana exceptionally well. None of the other healing CCs work like this one in terms of hps and mana handling... This is godlike!!! (i wish you could code something like this for priests and paladins... hehe... just kidding!).

A quick question: Are you going to update it for MoP? (when the time comes, of course, not now)

hbaioni, Thank you for sharing your ShamWOW success! +rep I am not sure what all my plans for MoP are, but I will be updating ShamWOW to reflect the changes to Shaman in that expansion as I have for past patches and expansions. Some things I will be able to mock for testing in Cata, but inevitably it will require testing and revisions cycle with MoP so there will be some delay in release after HonorBuddy becomes available. As for changes being made now, I am making some architectural changes that will be in the next release to hopefully boost healer numbers slightly and PVE DPS numbers a good bit. It's touched a large part of the code however so is taking a good bit of testing before being ready to release as BETA. Look for it in the next week or so. Bobby53

 

[BaturalNoobs]

Just a helpful note: if anyone has updated to the latest HB and is getting this error just reinstall ShamWOW:

[10:24:17 PM:104] Compiling C:\Users\Ryan\Dropbox\Software\HB\Honorbuddy\CustomClasses\Config
[10:24:17 PM:105] Compiling C:\Users\Ryan\Dropbox\Software\HB\Honorbuddy\CustomClasses\ShamWOW
[10:24:17 PM:490] Could not compile CC from C:\Users\Ryan\Dropbox\Software\HB\Honorbuddy\CustomClasses\ShamWOW!
[10:24:17 PM:491] File: ShamWOW.SpellUtility.cs Line: 100 Error: The name 'Safe_IsMoving' does not exist in the current context
File: ShamWOW.SpellUtility.cs Line: 124 Error: No overload for method 'Safe_CastSpell' takes '2' arguments
File: ShamWOW.SpellUtility.cs Line: 140 Error: The type or namespace name 'GameUnstableException' could not be found (are you missing a using directive or an assembly reference?)
File: ShamWOW.SpellUtility.cs Line: 174 Error: The name 'Safe_IsMoving' does not exist in the current context
File: ShamWOW.SpellUtility.cs Line: 196 Error: Cannot access a non-static member of outer type 'Bobby53.Shaman' via nested type 'Bobby53.Shaman.PriorityAdapter'
File: ShamWOW.SpellUtility.cs Line: 199 Error: Cannot access a non-static member of outer type 'Bobby53.Shaman' via nested type 'Bobby53.Shaman.PriorityAdapter'

Thanks to Bobby53 for the best HB CC!

 

[handnavi]

Just a helpful note: if anyone has updated to the latest HB and is getting this error just reinstall ShamWOW:
Thanks to Bobby53 for the best HB CC!

Hey Batural,
in this Case the problem is the following:
You have got 2 copies of ShamWOW in your folder. The first is in the folder ShamWOW and the second in ShamWOW! .
This causes errors. Please remove atleast one of them.

 

[-stalker-]

Just a helpful note: if anyone has updated to the latest HB and is getting this error just reinstall ShamWOW:

Thanks, that fixed it!

Hey Batural,
in this Case the problem is the following:
You have got 2 copies of ShamWOW in your folder. The first is in the folder ShamWOW and the second in ShamWOW! .
This causes errors. Please remove atleast one of them.

False, only had one ShamWOW folder and I got this error!

 

[LowKey]

Same. Had also noticed the pro-tips from Batural and Bobby.

 

[Vladdan]

love it! thanks!

 

[Rainermist]

hello bobby
ths cc works as of today no longer, I get this error message

"Bobby53.Shaman" kann nicht ?ber den geschachtelten Typ "Bobby53.Shaman.PriorityAdapter" zugegriffen werden.
Datei: ShamWOW.SpellUtility.cs Pfad: 199 Fehler: Auf einen nicht statischen Member des ?u?eren Typs "Bobby53.Shaman" kann nicht ?ber den geschachtelten Typ "Bobby53.Shaman.PriorityAdapter" zugegriffen werden.


Yesterday it works perfectly an now i cant select ur cc anymore!

pls healp

 

[bobby53]

hello bobby
ths cc works as of today no longer, I get this error message

"Bobby53.Shaman" kann nicht ?ber den geschachtelten Typ "Bobby53.Shaman.PriorityAdapter" zugegriffen werden.
Datei: ShamWOW.SpellUtility.cs Pfad: 199 Fehler: Auf einen nicht statischen Member des ?u?eren Typs "Bobby53.Shaman" kann nicht ?ber den geschachtelten Typ "Bobby53.Shaman.PriorityAdapter" zugegriffen werden.


Yesterday it works perfectly an now i cant select ur cc anymore!

pls healp

Rainermist, Thanks for the post but unfortunately there isn't enough information provided for me to diagnose your issue. Please see FAQ #1 in the ShamWOW Frequently Asked Questions [CLICK HERE] for steps on posting the information needed for any issue you need assistance with.

If you just installed or updated HonorBuddy to the latest version, remember you need to reinstall ShamWOW. Also, reinstalling ShamWOW means extracting all .ZIP contents and not just the ShamWOW folder. For details see the FAQ previously linked. Good luck with your Shaman, Bobby53

 

[bloodline79]

Bobby im on my third shamwow shaman different servers 2 complet 1 horde 1 alli 3rd horde again sham wow is just frickin awesome. on a side note maybe not everyone knows who that is in ur profile pic but if thats you you are my idol IRL you rock

 

[fish221171]

Bobby im on my third shamwow shaman different servers 2 complet 1 horde 1 alli 3rd horde again sham wow is just frickin awesome. on a side note maybe not everyone knows who that is in ur profile pic but if thats you you are my idol IRL you rock

Yeah I was wondering the same thing. As another side side note , I hope you create a Monk CC bobby as shamwow is just excellent.

 

[Mariuz]

I have a problem with this cc. Whenever i try to start the bot while shamWOW is loaded my wow totally lags. It lags so much and just stands there doing some weird jumps while trying to heal, This makes healing impossible for it in dungeons.
HonorBuddy Mode: Dungeonbuddy
Shamans Location:Blackfathom deeps
What should have happened (be specific):It should have healed the group!
What did happen (be specific):Wow lagged out and the bot could not move because of the lag
Computer time of problem or log mark (not realm time):No idea.
Note: This problem started when i began using dungeonbuddy

 

[amputations]

I have a problem with this cc. Whenever i try to start the bot while shamWOW is loaded my wow totally lags. It lags so much and just stands there doing some weird jumps while trying to heal, This makes healing impossible for it in dungeons.

Hi Mariuz, for Bobby to be able to help you sort out your problem, you need to post a full logfile of the event.

 

[Kloppe]

I try this with Dungeonbuddy Beta, I got 2 shamans, same level/plugins/settings/bot config/class config. One will work flawlessly and follow the leader/tank in the dungeon. The other will only move if in combat, after combat it till just stand still looking.

I have compared the log-file side-by-side and the only different is:
"[talent] Ancestral Swiftness: must stop to cast Ghost Wolf " - Not moving shaman

Both Elemental specced. What is wrong?

View attachment log file of not moving shaman.txt
View attachment moving shaman.txt

Edit:
If I try to move my character it will cancel any movement every ~third second

 

[bobby53]

I try this with Dungeonbuddy Beta, I got 2 shamans, same level/plugins/settings/bot config/class config. One will work flawlessly and follow the leader/tank in the dungeon. The other will only move if in combat, after combat it till just stand still looking.

I have compared the log-file side-by-side and the only different is:
"[talent] Ancestral Swiftness: must stop to cast Ghost Wolf " - Not moving shaman

Both Elemental specced. What is wrong?

View attachment 47308
View attachment 47309

Edit:
If I try to move my character it will cancel any movement every ~third second

Kloppe, Thanks for the post and my apologies for any issues encountered. I looked at the log file named "log file of not moving shaman.txt" need your help with a couple things:

1. It is a partial log file. For me to look into issues I need a complete debug log file.

2. I need the local system time that you observe it not moving or a logmark reference. In other words, a specific moment in time where you are certain it should be moving and its not.

You'll want to visit the ShamWOW Frequently Asked Questions [CLICK HERE] for steps on providing the details in your post that I will need to be able to assist you. I'll keep my eye out for your follow up, Bobby53

 

[Kloppe]

Kloppe, Thanks for the post and my apologies for any issues encountered. I looked at the log file named "log file of not moving shaman.txt" need your help with a couple things:

1. It is a partial log file. For me to look into issues I need a complete debug log file.

2. I need the local system time that you observe it not moving or a logmark reference. In other words, a specific moment in time where you are certain it should be moving and its not.

You'll want to visit the ShamWOW Frequently Asked Questions [CLICK HERE] for steps on providing the details in your post that I will need to be able to assist you. I'll keep my eye out for your follow up, Bobby53

Now I think this is Dungeonbuddy-related. Did some more testing.