What's new
  • Visit Rebornbuddy
  • Visit Panda Profiles
  • Visit LLamamMagic
  • Visit Resources
  • Visit Downloads
  • Visit Portal
RebornBuddy Forums

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

ShamWOW for HB2 - An Enhance/Elemental/Resto + PVP/RaF Healbot by Bobby53

Status
Not open for further replies.
Shitbagwasted, Thanks for the well written post using the template and steps from the FAQ. Either the wrong log file was attached, or ShamWOW was installed incorrectly as the only directory that HonorBuddy found in your CustomClasses folder to search for custom classes to compile was Singular:

Code:
[19:03:26:828] Compiling C:\Users\Kungpow\HB\CustomClasses\Singular
Please repeat the installation of ShamWOW extracting the entire .ZIP to the CustomClasses folder and you should not encounter any further issues.

If ShamWOW was installed correctly, the following messages would have appeared also:

Code:
[19:03:26:828] Compiling C:\Users\Kungpow\HB\CustomClasses\Config
[19:03:26:828] Compiling C:\Users\Kungpow\HB\CustomClasses\ShamWOW
In the event it was the wrong log file, the symptom you described is also related to an incomplete installation. Many new users extract only the ShamWOW folder from the .ZIP and miss the Config folder entirely. As mentioned above, extract the entire .ZIP to the CustomClasses folder. After that completes, you can verify your installation by comparing the list of files and their folder locations given in the FAQ.

Thanks and good luck with your Shaman, Bobby53

Thanks for the help! Reinstalled HB and extracted the files over again and now it's working but I got a new problem... After running the bot for awhile, it freezes my WoW completely.
 
Thanks for the help! Reinstalled HB and extracted the files over again and now it's working but I got a new problem... After running the bot for awhile, it freezes my WoW completely.
Shitbagwasted, If you encounter a problem you'll want to post an issue in the same fashion you did before using the steps from the FAQ. If you have had a lot of start and stop botting activity (which is common when first learning to use HonorBuddy and getting it set up) you will at some point need to Shutdown/Restart Windows to clear out memory. HonorBuddy has issues interacting with WOW after encountering certain problems (like freezes.) Thanks for the post and good luck with your Shaman, Bobby53
 
Last edited:
Mr.Bobby.

HonorBuddy Mode: Quest with Honorbuddy_2.0.0.5494
Shamans Location: Deepolm (Kick?s profile)
What did happen (be specific):The char not face the target with ShamWOW v4.5.09...
Computer time of problem (local time, not realm time): 17.00
It was working verry well with ShamWOW v4.5.08.

log too large, 8 mb... :(

Rgds.
 

Attachments

Last edited:
Mr.Bobby.

HonorBuddy Mode: Quest with Honorbuddy_2.0.0.5494
Shamans Location: Deepolm (Kick?s profile)
What did happen (be specific):The char not face the target with ShamWOW v4.5.09...
Computer time of problem (local time, not realm time): 17.00
It was working verry well with ShamWOW v4.5.08.

log too large, 8 mb... :(

Rgds.
IvanRJ, Thanks for the details. You are using LazyRaider, which means the user handles movement and targeting leaving spell casting to the bot. Facing is a movement function and should be disabled. I am not at my computer but when I return will see if there was a change in that area that I missed including in the Change History. Also, you mentioned this occurring at 17:00 but the log file begins at 17:51. If you intended to attach a different log file just add that one to your post and I'll take a look at it. Will follow up on this later, Bobby53
 
Mr.Bobby.

New logfile, only doing Quest with Honorbuddy_2.0.0.5494,Deepolm (Kick?s profile) with Disable CC Movement, ans still not facing the target when iit is atacking behind you..

Rgds.
 

Attachments

Last edited:
Been using this new build with lazyraider for raids and heroics for a few hours now, and all I can say is SHAMWOW!!!!

faster and smoother then ever! Thanks a lot bobby! don't know what I would do without this damn thing.
 
Hey I was wondering if it is possible you add two features.
Pause Healing button & Stop healing if I eat or drink
 
Yea these are two superb ideas but I do not think the pause one is going to be put in. I think I read that it would involve to much work to do it or something like that, I could be wrong though. But the idea about eating is awesome. I can't remember the number of times I thought it was safe to pop food only for it to stand back up a split second later for it to refresh water shield or top off a char that just buffed stamina. I am not sure if you could throw in a check to see if a player is eatting or drinking to halt all actions until it is standing again or not, but that would be awesome, especially in those times where you are constantly moving and just wanna get a quick burst of mana while others are moving to next pull.
 
Please give us the oportunity to manually set target for Earth Shield. Shamwow is perfect in most any other way, but now earth shields seem to be a bit random, and I see in several raids and 5 mans that it is refreshed after running out. This is lost healing.
 
Hi Bobby53, I just wanted to take a sec and give you much thanks and appreciation for the excellent work you do for this bot, especially this CC for Shaman lovers like myself.
 
Mr.Bobby.

New logfile, only doing Quest with Honorbuddy_2.0.0.5494,Deepolm (Kick?s profile) with Disable CC Movement, ans still not facing the target when iit is atacking behind you..

Rgds.
IvanRJ, As mentioned before Facing is a movement function. Movement is disabled either when you select that setting as you described in Class Options, or automatically when using LazyRaider. When movement is disabled it applies to all automatic movement during combat. Since the choosing these setups turns off movement (thus turning off Facing), it appears that it is behaving correctly based upon the logs and description given.

I also checked the changes in in ShamWOW 4.5.09 and none were made in this area, so you should obtain the same results if you use the same settings in ShamWOW 4.5.08.

Thanks for the posts and good luck with your Shaman, Bobby53
 
Been using this new build with lazyraider for raids and heroics for a few hours now, and all I can say is SHAMWOW!!!!

faster and smoother then ever! Thanks a lot bobby! don't know what I would do without this damn thing.
shovelhead, Glad it is working well for you! Thanks for the post and good luck with your Shaman, Bobby53
 
Hey I was wondering if it is possible you add two features.
Pause Healing button & Stop healing if I eat or drink
Yea these are two superb ideas but I do not think the pause one is going to be put in. I think I read that it would involve to much work to do it or something like that, I could be wrong though. But the idea about eating is awesome. I can't remember the number of times I thought it was safe to pop food only for it to stand back up a split second later for it to refresh water shield or top off a char that just buffed stamina. I am not sure if you could throw in a check to see if a player is eatting or drinking to halt all actions until it is standing again or not, but that would be awesome, especially in those times where you are constantly moving and just wanna get a quick burst of mana while others are moving to next pull.
@rcadams, I definitely consider all user comments and feedback for provoking change in the behavior of ShamWOW. However, there are two key awareness items all users should know regarding requests for change:

1) The design objective for ShamWOW is to assess the current combat scenario (Shamans spec, operating environment, key stats, buffs, talents, glyphs, enemy stats, enemy count, friendly count, etc. etc. etc.) and automatically provide the best in class response. In other words, it should figure out what should be done and do it without the user having to say to.

2) Any change request needs to have details describing the combat situation it is trying to provide an improved response for. In other words, just asking for a Pause Healing button isn't sufficient. An explanation of the issue resolved by the Pause Healing button is needed. With that information, I may see a way for ShamWOW to automatically detect and respond to that situation without requiring a button that would later have to be unchecked, re-clicked, etc. There are already too many options in ShamWOW and I would rather remove existing ones than add more.

So in response to these two requests:

Pause Healing button - please describe the combat situation (spec, environment, etc.) and what is happening that would make it advantageous to have this button

Stop healing if I eat or drink - please provide details of what situation you don't want to heal when resting. I'm assuming this refers to a Resto, but other than that don't know if you mean PVP, Raids, etc. That type of detail is needed because turning off healing in that situation in all circumstances would not be desirable.


Thanks for the post and I look forward to your additional thoughts on this helping to continue improving ShamWOW, Bobby53

@shovelhead: The Pause button is not too much work or too difficult to do. Effort just needs to result in an improvement. Based upon the minimal info provided, its unclear how a Pause Healing button for a Resto used with LazyRaider differs from the HonorBuddy Stop/Start button. That is why details about the combat scenario are needed. I appreciate your thoughts on these and other changes as well, Bobby53
 
Last edited:
Please give us the oportunity to manually set target for Earth Shield. Shamwow is perfect in most any other way, but now earth shields seem to be a bit random, and I see in several raids and 5 mans that it is refreshed after running out. This is lost healing.
Heffalompen, Thank you for the post and my apologies for your issue. However more detail is required (battlegrounds, arena, dungeons, raids? it is handled differently in each.) In general, the symptoms described for Earth Shield do not match the results of my testing. Be sure to use the template and steps provided on the ShamWOW Frequently Asked Questions [CLICK HERE] for any question, issue, or constructive criticism you would like me to research and respond to. Note, there is an option to disable ShamWOW from applying any shields putting that responsibility in your hands if you prefer. See Class Options -> General -> Disable Shields. That option was added more for Arena play so the user could quickly move Earth Shield around as they prefer, but feel free to use this in any environment where you want to be responsible for manually applying and reapplying all Shields. Thanks and good luck with your Shaman, Bobby53
 
Hi Bobby53, I just wanted to take a sec and give you much thanks and appreciation for the excellent work you do for this bot, especially this CC for Shaman lovers like myself.
ordy, You are very welcome! Thanks for sharing your ShamWOW success +rep and continued luck with your Shaman, Bobby53
 
bet I thanked you before, but here by my thanks again for granting me the ability to get my LFR Tier set complete, got a fully geared shaman alt which I can use whenever I want with this CC in Lazyraider mode. Keep up the work! +rep again
 
hm in .09 is elementry mastery not working for me. anyone with the same problem?
 
HonorBuddy Mode: Grind/PVP/Mixed/Quest/RaF : Lazyraider
Shamans Location: dragon soul
What should have happened (be specific): Decent dps (I'm assuming?) Casts correctly, full rotation
What did happen (be specific):I'm not sure if i've configured it wrong, but the rotation was going slow (at first, it was even trying to heal people as elemental). it'd use flame shock, then a lava burst, rarely using lighting bolt(Also chain lighting single target), waiting 3-5 seconds inbetween casts, for a while it would just spam nothing but lava burst, waiting for it to come off cd if it had to.
Computer time of problem (local time, not realm time): 9-10 PM EST 12/10/11

am i configuring wrong? what should the settings be under?View attachment 12-10-2011_10_11 PM 2912 Log.txt
 
Last edited:
On the most part I find ShamWOW needs very little manual attention. But with the new instances specially the Deathwing fight, I find there is situations where it should be casting healing rain, I've tired to change the settings to get the bot to spam healing rain when available. But it just doesn't no matter how I change the settings. THe reason why I was thinking it might be nice to have a pause cc feature is so that you can do things like use buff food, when the raid has just wiped, or when to raid leader calls to stop healing and let everyone die. I have been clicking stop HB, but it crashes both the wow client and HB sometimes which is even worse.

With the food buff, I usually use fortune cookie.. And while they are easy enough to get, the CC doesn't care if your eating, and if someone buffs, it will start healing, even if the raid hasn't engaged the boss.etc sometimes I've used as many as 3 cookies to get my damn buff.. Raid people ask me whats going on, I just tell them I'm after the 5000g.. ROFL

Hmm.
 
Last edited:
Did anyone experienced weird thing in EoTS. My char moving to hotspot but then he sees somone low on health and trying to heal him, so he cast for 0.5 sec then stops and run to hotspot again. And this repeats over and over. Looks extremely suspicious tbh. I`ll post a log when i come home.
 
Status
Not open for further replies.
Back
Top