What's new
By:
  • Visit Rebornbuddy
  • Visit Panda Profiles
  • Visit LLamamMagic
  • Visit Resources
  • Visit Downloads
  • Visit Portal
RebornBuddy Forums

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

[N] The Everbloom Raw Gold Farm

What are the recommended singular settings ? Eat% targeting etc, ilvl 709 DK seems to die here and there as blood with tank gear.
 
Svenstar123 said:
What are the recommended singular settings ? Eat% targeting etc, ilvl 709 DK seems to die here and there as blood with tank gear.
Click to expand...

I have not changed any settings in my singular, were and how do you die? Bad talents?
 
fandig2 said:
I have not changed any settings in my singular, were and how do you die? Bad talents?
Click to expand...

Using the default blood singular talents, i will reset my settings aswell then since that could be the issue on my end. I will report back with results in the morning, thanks for the profile already though.
 
Much better now with those talents, thanks alot. I havent even gotten below 50% so far..

edit: Died 2 times, i think its the first pack on the right side, sometimes i get kicked into another pack which results in death.
Also some mobs get killed alone without anymore getting pulled which steals alot of time.
running invasions over night to get better gear and let it run during the daytime.
 
Last edited:
I noticed running it over night that it got stuck at this certain area and bot keep running towards the stuff cliff area. Is it possible to also pull the smaller adds on the second pull on the side of the road before the big guys? Reason is that if the big guys punt my guy it tends to pull sometimes 3 of those petal mobs then dies..
 
arthur118218 said:
Numbers for last hour

Kills: 621 (641/hr)
Deaths: 0 (0/hr)
Loots: 135(138/hr)
Honor Gained: 0 (0/hr)
Gold Gained: 1961.266 (1980/hr)

EDIT: still unstable, will fix next week.

Corrected a bug :
Click to expand...
Can this be done with a ilvl700 DK? with reduce aggro range, how do you reduce the aggro range? Do you change the code from 40 to something higher?
 
Last edited:
Evilaizen said:
Can this be done with a ilvl700 DK? with reduce aggro range, how do you reduce the aggro range? Do you change the code from 40 to something higher?
Click to expand...

I don't think you can hit 1980/gph with ilvl700 DK. I have a 705 DK and maxed out at 1700/gph. I was also using a flask of greater strength. I can get them for around 10g on my server and it boosts my gph by 100+ so it makes sense for me.
 
keilos said:
I don't think you can hit 1980/gph with ilvl700 DK. I have a 705 DK and maxed out at 1700/gph. I was also using a flask of greater strength. I can get them for around 10g on my server and it boosts my gph by 100+ so it makes sense for me.
Click to expand...
1600-1700gph would still be great imo. I just wanted to see if I can alter the aggro range. I noticed Fandig's profile on beginning of the instance it clears the first three in comparison to the other one where it aggros the first three to the petal bunch. I wanted to see if I can get a balance of both with minimal to death to eat time while my health is low. Also does anyone have their set to eat food or recover at a certain health%. Thanks!
 
Evilaizen said:
1600-1700gph would still be great imo. I just wanted to see if I can alter the aggro range. I noticed Fandig's profile on beginning of the instance it clears the first three in comparison to the other one where it aggros the first three to the petal bunch. I wanted to see if I can get a balance of both with minimal to death to eat time while my health is low. Also does anyone have their set to eat food or recover at a certain health%. Thanks!
Click to expand...
You can reduce aggro range, open the profile and change the last number in the AzyulAggro like so :
PHP: 
<CustomBehavior File="RunCode" Code="await AzyulAggro(new WoWPoint(478.5121,1440.393,103.2165), 30, true)" />
Change the 30 in the end to lower range like 20. Sometimes this won't do anything because it just pulls the flower pack wich are "locked" to each other.
If the first pack is a problem you could also delete this line :
PHP: 
Line 270 : <DisableBehavior Name="Combat" />
At the begining of the run, so it will not run through the first mobs but actually stop to fight them.

NB: Some deaths may still occurs because of the mobs on patrol, who can aggro you at bad timing, i'm working on a fix, but I think the profile is still pretty good.
 
arthur118218 said:
You can reduce aggro range, open the profile and change the last number in the AzyulAggro like so :
PHP: 
<CustomBehavior File="RunCode" Code="await AzyulAggro(new WoWPoint(478.5121,1440.393,103.2165), 30, true)" />
Change the 30 in the end to lower range like 20. Sometimes this won't do anything because it just pulls the flower pack wich are "locked" to each other.
If the first pack is a problem you could also delete this line :
PHP: 
Line 270 : <DisableBehavior Name="Combat" />
At the begining of the run, so it will not run through the first mobs but actually stop to fight them.

NB: Some deaths may still occurs because of the mobs on patrol, who can aggro you at bad timing, i'm working on a fix, but I think the profile is still pretty good.
Click to expand...
Giving those settings a whirl here and report back to you shortly.
 
Arthur's modified version V2.4 is out ! :)

  • Will grab any mob too far from the pack of mob you're fighting (and without random crashes now)
  • Will now use Greater Draenic Strength Flask if you have it (thanks for the suggestion)
  • Slight hotspots changes to gain time
  • Bugfixes
Runs will take from 6min30 to 8min.
GPH is now about 2300 on my 720 dk.
Had 0 deaths on a 3h run.

I will try to make something work for the Noxious Explosion.


Arthur
 

Attachments

Last edited:
arthur118218 said:
Arthur's modified version V2.4 is out ! :)

  • Will grab any mob too far from the pack of mob you're fighting (and without random crashes now)
  • Will now use Greater Draenic Strength Flask if you have it (thanks for the suggestion)
  • Slight hotspots changes to gain time
  • Bugfixes
Runs will take from 6min30 to 8min.
GPH is now about 2300 on my 720 dk.
Had 0 deaths on a 3h run.

I will try to make something work for the Noxious Explosion.


Arthur
Click to expand...

I'm testing this out and see a few things and don't know if you've noticed them yet. I have the Greater Flasks, but it keeps drinking them to keep the 2 hour buff even when it has over an hour left. In my example had 4 with 22 mins left, the first run he drank 2 and then about 30 minutes later drank another. Also, if wraith walk has to be used it seems to stop the bot? They use wraith walk and then stay there dies, will res, and then just stand there.

I'm 706, but can run this with stoneskin gargoyle on my weapon. Just need to figure out the wraith walk situation and it should be good! I appreciate both of your works on this! I'll be throwing out some donations soon after more testing!
 
keilos said:
I'm testing this out and see a few things and don't know if you've noticed them yet. I have the Greater Flasks, but it keeps drinking them to keep the 2 hour buff even when it has over an hour left. In my example had 4 with 22 mins left, the first run he drank 2 and then about 30 minutes later drank another. Also, if wraith walk has to be used it seems to stop the bot? They use wraith walk and then stay there dies, will res, and then just stand there.

I'm 706, but can run this with stoneskin gargoyle on my weapon. Just need to figure out the wraith walk situation and it should be good! I appreciate both of your works on this! I'll be throwing out some donations soon after more testing!
Click to expand...
Woops my bad the wraith walk was in fact not doing anything after casting it. I changed the file.
For the flasks, I have no problem on my end. Are you using greater draenic strength flask ?

I'm working on a new release for lower ilvl chars. Will roll out tomorow or Monday.

Arthur
 
arthur118218 said:
Woops my bad the wraith walk was in fact not doing anything after casting it. I changed the file.
For the flasks, I have no problem on my end. Are you using greater draenic strength flask ?

I'm working on a new release for lower ilvl chars. Will roll out tomorow or Monday.

Arthur
Click to expand...

Nice, I'm looking forward to seeing how it performs now. I am using greater draenic strength flask, but it was probably something on my end. I'll test without flasking first. Thanks again for that update. I'll post results soon.
 
You must log in or register to reply here.
Back
Top