[PAID] [Mage] Portal - An Advanced Honorbuddy Mage Routine [PvE/PvP]

[Millz]

View attachment 114399

Don't know why but deep freeze hasn't been working at all. And I really hate the mechanics of your burst mode. The fact that it becomes enabled is weird. When i hit the burst hot key, it should just burst at that time and that's it. Then i hit burst again when im ready. Not have a mode that's kind of weird.

Deep Freeze -> I'll check it out. Been multiple issues with casting spells recently from the bot. You tried removing the glyph and seeing if it works then?

Burst -> Could be set to activate for ~10 seconds or something then auto deactivate again? Would probably be a nicer way to handle it.

 

[maybis]

That seemed to work on the target dummy, then i respecced and talented the way i should. (I hit 90 yesterday on the mage.) Went back to the dummy and it seems to be doing the same thing again.

LOG > View attachment 6540 2013-12-20 07.16.txt

 

[Millz]

That seemed to work on the target dummy, then i respecced and talented the way i should. (I hit 90 yesterday on the mage.) Went back to the dummy and it seems to be doing the same thing again.

LOG > View attachment 114404

Thanks. Still some errors in there, so I'll get those sorted when I get home first, and go from there.

 

[maybis]

Thanks, you da man!

 

[dilbog]

View attachment 5280 2013-12-20 14.43.txt Here is the log.
No hot keys working including tyrael for some reason.

Hot keys tested burst and aoe. also tyrael c for pause

 

[Millz]

View attachment 114428 Here is the log.
No hot keys working including tyrael for some reason.

Hot keys tested burst and aoe. also tyrael c for pause

Hmm, it's showing one toggle in the log;

[14:44:13.098 D] Burst Toggle pressed.

What if you disable the manual cast code, does it work then?

Try killing off any TeamViewer processes too - it's been known to mess with hotkeys in the past.

 

[dilbog]

Hmm, it's showing one toggle in the log;

[14:44:13.098 D] Burst Toggle pressed.

What if you disable the manual cast code, does it work then?

Try killing off any TeamViewer processes too - it's been known to mess with hotkeys in the past.

Dont use team viewer and pressed the keys lots of times. one thing when holding the c key to pause the routine it stops but as soon as i let go it starts again. also no chat out put for anything.

Actualy I think it's Hb thats at fault as it does the same thing with king wow.

Tried a fresh HB install with same issue, going to log a fault with HB

 

[Millz]

Dont use team viewer and pressed the keys lots of times. one thing when holding the c key to pause the routine it stops but as soon as i let go it starts again. also no chat out put for anything.

Actualy I think it's Hb thats at fault as it does the same thing with king wow.

Tried a fresh HB install with same issue, going to log a fault with HB

Yeah if it's affecting other routines it's not Portal.

----

Updates;

[20/Dec/2013]
- [Arcane] Fixed Arcane Blast from casting when 4 charges already active.
- Fixed an exception error with Ice Ward.
- Fixed an exception error with obtaining a unit to Polymorph.
- Burst mode will now automatically disable 10 seconds after activating.

 

[Haggy223]

Hi Millz,

would it be possible to use instant casts in arena if target is <=5% (round about). Today the CR tried to cast Frostbolt when the kill target only had like 30k life left.
And got counterspell and target was healed.

Haggy

 

[Millz]

Hi Millz,

would it be possible to use instant casts in arena if target is <=5% (round about). Today the CR tried to cast Frostbolt when the kill target only had like 30k life left.
And got counterspell and target was healed.

Haggy

Just keep jumping around and moving.. it'll use instant cast spells.. fire blast / ice lance etc.

 

[dilbog]

Yeah if it's affecting other routines it's not Portal.

Maybe you can contact them aswell so they know it just is not me. bty Singular hot keys working fine but tyrael as bot base pause key wouldnt. I suggest you try it out and maybe you will see something thats wrong.

 

[Millz]

Maybe you can contact them aswell so they know it just is not me. bty Singular hot keys working fine but tyrael as bot base pause key wouldnt. I suggest you try it out and maybe you will see something thats wrong.

Hmm they seem to be working fine here, tested Portal and Demonic.

 

[dilbog]

Hmm they seem to be working fine here, tested Portal and Demonic.

Hmmm thx Millz It's weird i've installed fresh hb a few times now, oh will was gonna reinstall my os now might be a good time

 

[Millz]

Hmmm thx Millz It's weird i've installed fresh hb a few times now, oh will was gonna reinstall my os now might be a good time

When all else fails... reinstall windows \o/


[20/Dec/2013 - Update #2]
- Added auto flag return. No settings, will auto enable when required.

 

[dilbog]

When all else fails... reinstall windows \o/

Did that today still getting the same bloody issue, It seems minify is my issue from what i can see if I start HB with minify already enabled it will lock all the hotkeys and crash after a while. but if i was to load HB go into Tyrael settings and disable plugins then start everything works fine. Now here is the kicker if i was to stop HB go back into Tyrael and enable plugins again then start HB it will work fine but then if i shut down HB and load it again with minify enabled it will go back to crashing it's like there is some sort of conflict at start up.

 

[HB7690L59]

Yeap i experience the same thing.

 

[Millz]

Did that today still getting the same bloody issue, It seems minify is my issue from what i can see if I start HB with minify already enabled it will lock all the hotkeys and crash after a while. but if i was to load HB go into Tyrael settings and disable plugins then start everything works fine. Now here is the kicker if i was to stop HB go back into Tyrael and enable plugins again then start HB it will work fine but then if i shut down HB and load it again with minify enabled it will go back to crashing it's like there is some sort of conflict at start up.

You only need minify enabled once, and then it can be disabled.

It's using the same method as what I Want Movement is - it takes the current combat routine and unloads it, wraps some code around it (decorates it), and then re-loads the "new" combat routine.. So it only needs to run once to decorate the original routine. Doesn't need to be pulsed etc.

That being said, you shouldn't really need to use minify with my routines, they're fast enough as it is. Minify gives better FPS in game, but actually slows down the routine.

 

[dilbog]

You only need minify enabled once, and then it can be disabled.

It's using the same method as what I Want Movement is - it takes the current combat routine and unloads it, wraps some code around it (decorates it), and then re-loads the "new" combat routine.. So it only needs to run once to decorate the original routine. Doesn't need to be pulsed etc.

That being said, you shouldn't really need to use minify with my routines, they're fast enough as it is. Minify gives better FPS in game, but actually slows down the routine.

Hey Millz
With minify your routine works a lot better for me at least, I never had fps issue or maxed cpu issues but always had times when your routines would just get confused and minify sorted that out thats why I like to use it. Smoothing out the rotation increased the damage by a good margin. I'm have Intel 2600k [email protected],Ati hd 6990 gfx and run os/WoW/HB on a vertex 4 ssd, and 80meg fttc net connection so power to run these routines was never a prob. Only routines I dont use minify with are Taunha's but kingwow ect it helps them all.

 

[Millz]

Hey Millz
With minify your routine works a lot better for me at least, I never had fps issue or maxed cpu issues but always had times when your routines would just get confused and minify sorted that out thats why I like to use it. Smoothing out the rotation increased the damage by a good margin. I'm have Intel 2600k [email protected],Ati hd 6990 gfx and run os/WoW/HB on a vertex 4 ssd, and 80meg fttc net connection so power to run these routines was never a prob. Only routines I dont use minify with are Taunha's but kingwow ect it helps them all.

Hmm that's interesting.

Honorbuddy runs everything on Pulse, and each pulse calls a new framelock (i.e. locks the wow frame, runs all the logic, then releases the frame).

By default it looks like

-> Lock Frame
-> Call Botbase
-> Call Plugins
-> Call Combat Routine
-> Release Frame

Minify changes it, so it goes..

-> Lock Frame
-> Call Botbase
-> Call Plugins
-> Release Frame
-> Lock Frame
-> Call Combat Routine
-> Release Frame

Locking and releasing frames has an overhead, so makes it slightly slower to get to the combat routine, but makes the frames release more often, giving better in game FPS.

 

[maybis]

Hey millz, not sure whats going on today. For some reason the CC doesn't use cd's or burst mode. I have options enabled and used the hotkeys but it's not working in arena. Also it's not managing CC effeciently. It sheeps rarely and i have the Ring of Frost talent set to drop on sheeped unit, but it doesn't do that either. I try to stop the bot to manually do it but it keeps casting and taking back over. I'll attach a log.

LOG > View attachment 6712 2013-12-22 09.07.txt