MAD (Miraculum Apocatstasis Druidae)

[Millz]

F9 only works , and then again only if u enable wow chat output && Tree logging in Power Settings

Have those enabled, still isn't writing anything out.

 

[macVsog]

Tried running this in MSV but having no luck getting it to work. 1.0.5 worked brilliant, but this one just isn't healing (well, asside from the odd spell here and there).

The only way I can get it to run at any speed is by having Tyrael's Framelock enabled, and at 200tps. Framelock enabled is just unplayable for me. I've tried it without at 200, 100, 50, and 20 tps. I've tried RaidBot (which appears to enable framelock [or lags loads] -> unplayable) and i've tried LazyRaider without framelock again to no avail.

I've turned all my settings so that it should purely attempt to heal without any other bits, but that doesn't help either. Only time I noticed it got significantly faster was when fighting Elegon and the platform despawns, so running to the side there were only a few people to heal and the group count updates, then it spams heals as fast as it usually does.

Attached log and settings file.

*edit* Tried again disabling all plugins - didn't change. Oh, and F9/F11 doesn't appear to write anything out to the HB window anymore? Log spams a lot of no boss found, when I am fighting bosses..

This is the same issue I'm having. You stated it a lot clearer than me. Mine was also working flawless previously. If you found out the cause please post it.

 

[Variz]

This is the same issue I'm having. You stated it a lot clearer than me. Mine was also working flawless previously. If you found out the cause please post it.

I'll third this. Same problem. Using Framelock seems to help, however my computer lags a ton. Didn't have to do this in the past.

 

[Mirabis]

Have those enabled, still isn't writing anything out.

HB logging set to Diagnostic ? It'l show only if it's set to that.

 

[Mirabis]

I'll third this. Same problem. Using Framelock seems to help, however my computer lags a ton. Didn't have to do this in the past.

MAD framelock or Tyrael Framelock,

OT: Seems like multiple people have this, not sure why it works for some and not for others, investigating atm.

For me and most testers it's the fastest version of MAD till now, PvP & PVE Rotations being only 200-300ms etc...

 

[kuw84]

Really wish I could use this for PvP....any word on getting the movement working?

It just queue'd up to a random battle ground, joined AV, ran to the gate, mounted up and is loading tiles again....... i'm gonna shoot myself now.

Changed it to diagnostics mode and I get

Loading HawaiiMainLand_27_31
Updating repair cost for current equipped items. New value: [25g66s64c]
Detected change in GroupMember count, Updating Selective Heal
[BGBuddy]: Queueing up for RandomBattleground
[BGBuddy]: Accepting battleground join in 7 seconds.
Inserting Stormpike Herald [Gossip, Questgiver] into the database!
Downloaded tilemap PVPZone01
Changed tilemap to PVPZone01, Tiled: True
Context changed, switching rotation to : PvP
Changed tilemap to PVPZone01, Tiled: True
[BGBuddy]: Starting Alterac Valley
Loading PVPZone01_32_30
System.ApplicationException: Cannot run Tick before running Start first!
at Styx.TreeSharp.Composite.Tick(Object context)
at Styx.CommonBot.TreeRoot.()
Cleared POI - Reason Exception in Root.Tick()
Cleared POI
Detected change in GroupMember count, Updating Selective Heal
Path randomized
Detected change in GroupMember count, Updating Selective Heal
Changed POI to:Type: Hotspot, Loc: <-542.7599, -163.3699, 57.0109>
[BGBuddy]: Moving to IcebloodGarrison [Reason: Captain Galvangar]
Loading PVPZone01_32_33
Loading PVPZone01_33_30
Loading PVPZone01_32_31
Loading PVPZone01_33_31
Loading PVPZone01_32_32
Successfully generated path from {792.3867, -493.305, 100.4429} to {-542.7599, -163.3699, 57.0109} in 412 milliseconds
Path randomized
Mounting: Amani War Bear

then BG starts and loading tiles. No movement but it loads everything right it seems! I'm so stumped.

Log
View attachment 6832 2012-12-25 23.51.txt

 

[papaours]

I also have the same kind of problem. Does nothing without framelock, and the game freezes for like 1 sec with it.

In LFR:
[TreePerformance] Elapsed Time to traverse RotationSelector: 2704 ms (31 ms client lag)
[TreePerformance] Elapsed Time to traverse RotationSelector: 1986 ms (31 ms client lag)
[TreePerformance] Elapsed Time to traverse RotationSelector: 1631 ms (31 ms client lag)

 

[jacobfraer]

Dungeons Presets enable Low lvl rotation, because most 90's barely run dungeons, it's mostly lowbies.
Turn off Low Lvl rotation in the healing section.

Is there a way where we can edit those presets ourselves? So that everytime i choose Dungeon, its the settings i made for dungeons?

And that is actually not true, when 90's have done all their LFR's and stuff, they do many dungeons to get justice points, and valor points.


And why is it using Healing Touch, when it can use Regrowth + Glyph of regrowth? Its 100 % Crit, which means its quicker cast than HT, and it heals a bit more


EDIT:

I have the same problem, with the latest SVN, that it doesnt really heal much. MAD framelock doesnt help, and Tyrael Framelock seems to lag even worse than ever

 

[Millz]

HB logging set to Diagnostic ? It'l show only if it's set to that.

Okay, shows the rotation speed @ diagnostic logging. Better if it went back to not needing to be at diagnostic though, it prints out too much spam.

MAD framelock or Tyrael Framelock,

OT: Seems like multiple people have this, not sure why it works for some and not for others, investigating atm.

For me and most testers it's the fastest version of MAD till now, PvP & PVE Rotations being only 200-300ms etc...

Tyrael framelock is what makes the CC run at speed, but is unusable due to the severe lagging.

So for framelocking...

Tyrael OFF, MAD ON; [TreePerformance] Elapsed Time to traverse RotationSelector: 9607 ms (37 ms client lag)

Tyrael ON, MAD ON; [TreePerformance] Elapsed Time to traverse RotationSelector: 2112 ms (38 ms client lag)

Tyrael ON, MAD OFF; [TreePerformance] Elapsed Time to traverse RotationSelector: 2885 ms (37 ms client lag)

Tyrael OFF, MAD OFF; [TreePerformance] Elapsed Time to traverse RotationSelector: 25081 ms (38 ms client lag)

All of these are running @ 200 TPS with a fresh/new copy of HB. 1.0.5 used to see 500-900ms rotations with both framelocks turned off.

Spams "No Boss found, grabbing MT" - Can that not be cached to check every x number of rotations or x seconds? Or even when first entering combat... It's not picking up a boss when you're fighting it either. Continues to say no boss found.

Log attached at diagnostic level from testing the above in MSV (first 3 - LFR, with preset LFR settings).

 

[Mirabis]

Is there a way where we can edit those presets ourselves? So that everytime i choose Dungeon, its the settings i made for dungeons?

And that is actually not true, when 90's have done all their LFR's and stuff, they do many dungeons to get justice points, and valor points.


And why is it using Healing Touch, when it can use Regrowth + Glyph of regrowth? Its 100 % Crit, which means its quicker cast than HT, and it heals a bit more


EDIT:

I have the same problem, with the latest SVN, that it doesnt really heal much. MAD framelock doesnt help, and Tyrael Framelock seems to lag even worse than ever

1) Yes, Go into Routines/MAD/Settings and rename the file , and rename it back when u need those settings .
2) It shouldn't, it only uses Healing Touch + Nature's Swiftness. It will only hard cast if LOW LVL ROTATION IS TRUE.
So to not use Healing touch , turn Low lvl Rotation off and it will use Regrowth ( Up the regrowth settings though ). This is caused by the preset enabling Low lvl rotation, to be universal for all lvls.
3) Tyrael Framelock even lags me, why mad doesn't work i don't know.

Okay, shows the rotation speed @ diagnostic logging. Better if it went back to not needing to be at diagnostic though, it prints out too much spam.

Tyrael framelock is what makes the CC run at speed, but is unusable due to the severe lagging.

So for framelocking...

Tyrael OFF, MAD ON; [TreePerformance] Elapsed Time to traverse RotationSelector: 9607 ms (37 ms client lag)

Tyrael ON, MAD ON; [TreePerformance] Elapsed Time to traverse RotationSelector: 2112 ms (38 ms client lag)

Tyrael ON, MAD OFF; [TreePerformance] Elapsed Time to traverse RotationSelector: 2885 ms (37 ms client lag)

Tyrael OFF, MAD OFF; [TreePerformance] Elapsed Time to traverse RotationSelector: 25081 ms (38 ms client lag)

All of these are running @ 200 TPS with a fresh/new copy of HB. 1.0.5 used to see 500-900ms rotations with both framelocks turned off.

Spams "No Boss found, grabbing MT" - Can that not be cached to check every x number of rotations or x seconds? Or even when first entering combat... It's not picking up a boss when you're fighting it either. Continues to say no boss found.

Log attached at diagnostic level from testing the above in MSV (first 3 - LFR, with preset LFR settings).

1) Interesting results, even though I should note: U can't compare the numbers from previous updates to the new ones, we calculate performance with another method now.
2) I will remove that Boss found stuff, it's not working, useless and slows the cc a tiny bit.


To All: I will rebuild the cc on latest stable release, test on fresh copy if it works there's not much I can do as I don't know why it works for me and not for u

By any chance​ , are u guys using a non-english wow client ?.

 

[papaours]

AcquireTargets takes 500 ms in a 25man raid, it's slow, but manageable.

However HealRotationComp can take like 20s without Tyrael frame lock.

 

[Swizzie]

This does nothing with frame lock unchecked and I think it casted a lifebloom or 2 in lfr with it checked

 

[Mirabis]

AcquireTargets takes 500 ms in a 25man raid, it's slow, but manageable.
However HealRotationComp can take like 20s without Tyrael frame lock.

Hold on, i'll upload a debug .zip that should work in 15minutes.

This does nothing with frame lock unchecked and I think it casted a lifebloom or 2 in lfr with it checked

Hold on, i'll upload a debug .zip that should work in 15minutes.

Also: If it doesn't heal, make sure the "SelfHeal" hotkey is disabled | If it's enabled it doesn't scan for people.

 

[jacobfraer]

1) Yes, Go into Routines/MAD/Settings and rename the file , and rename it back when u need those settings .

There is a file named "MADSettings_MYCHAR" (my char = my character, obviously ), and if i rename that one, i still dont understand how i can EDIT the presets? Is it by choosing a preset, edit the settings and then push SAVE?

QUESTION 2:
How do i disable a spell in MAD? I tried to set Tranquility to 0, but it still would cast it

 

[Mirabis]

There is a file named "MADSettings_MYCHAR" (my char = my character, obviously ), and if i rename that one, i still dont understand how i can EDIT the presets? Is it by choosing a preset, edit the settings and then push SAVE?

QUESTION 2:
How do i disable a spell in MAD? I tried to set Tranquility to 0, but it still would cast it

1) Enable Manual CD
2) Set Health to 1% and Units to 55 or something
3) U can't edit presets , but u can rename ur settings file to MAdsettings_Charname.config.PvP or .PvE and rename it back when u need it.

 

[timnor]

ya only works for me with framelock /w tyreals too really laggy still heals really well though xD just super laggy

 

[jacobfraer]

1) Enable Manual CD
2) Set Health to 1% and Units to 55 or something
3) U can't edit presets , but u can rename ur settings file to MAdsettings_Charname.config.PvP or .PvE and rename it back when u need it.

1) What is this?
2) Got it
3) Okay great. A nice feature in the future would be so people could make their own presets Could be fun - I have never understood why you love those shrooms

 

[Mirabis]

ya only works for me with framelock /w tyreals too really laggy still heals really well though xD just super laggy

1) What is this?
2) Got it
3) Okay great. A nice feature in the future would be so people could make their own presets Could be fun - I have never understood why you love those shrooms

[AsyncKey] RotationSelector takes 338 ms and 15 ms client lag
[AsyncKey] RotationSelector takes 121 ms and 15 ms client lag

a few more minutes and i'll post a new version

 

[Swizzie]

So is Tyrael better then Lazyraider for this CC? or does it matter

 

[jacobfraer]

So is Tyrael better then Lazyraider for this CC? or does it matter

Yes.