What's new
By:
  • Visit Rebornbuddy
  • Visit Panda Profiles
  • Visit LLamamMagic
  • Visit Resources
  • Visit Downloads
  • Visit Portal

[LegCraftCompFarm] EoTS (Captain set) + SoEP (Aughild set) + IWD (Asheara set)

This doesn't load up. an Error message in red is given when attempting to load the profiles
 
System.Exception: Element DungeonExpFoundObjOrFullyExped is not supported. Please check your XML and try again. (<DungeonExpFoundObjOrFullyExped questId="1" stepId="1" until="ObjectFound" actorId="80447" objectDistance="40" boxTolerance="0.38" boxSize="14" ignoreMarkers="False" forceResetMax="0">
<IgnoreScenes>
<!-- Ignoring dead end for SoEP event -->
<IgnoreScene sceneId="31026" />
<!-- Ignoring waypoints -->
<IgnoreScene sceneId="31035" />
<IgnoreScene sceneId="31027" />
<!-- Ignoring unwanted dead ends and exits -->
<IgnoreScene sceneId="31036" />
<IgnoreScene sceneId="31008" />
<IgnoreScene sceneId="174054" />
<IgnoreScene sceneId="174055" />
<IgnoreScene sceneId="174056" />
<IgnoreScene sceneId="174057" />
</IgnoreScenes>
</DungeonExpFoundObjOrFullyExped>) Line 29
в ..(PropertyInfo , XElement , Object )
в Zeta.XmlEngine.XmlEngine.Load(Object obj, XElement element)
в ..(XElement , Type )
в ...(XElement )
в System.Linq.Enumerable.WhereSelectEnumerableIterator`2.MoveNext()
в System.Collections.Generic.List`1..ctor(IEnumerable`1 collection)
в System.Linq.Enumerable.ToList[TSource](IEnumerable`1 source)
в ..(XElement , PropertyInfo )
в ..(PropertyInfo , XElement , Object )
в Zeta.XmlEngine.XmlEngine.Load(Object obj, XElement element)
в Zeta.Bot.Profile.Profile.Load(XElement element, String path)
в Zeta.Bot.Profile.Profile.Load(String path)
в Zeta.Bot.ProfileManager.Load(String profilePath, Boolean rememberPath)
 
joka666 said:
for everyone having issues then they need to read this post (I have attached the updated copy of the working profile for newer DB+Trin re-coded by gorm)

View attachment 130274
Click to expand...

Thanks for uploading this, couldn't figure out git. Not having problems getting it to load but it doesn't ever go back to town and remake game, it just keeps re-exploring sewers over and over in the same game. Anyone else have this problem?
 
Last edited:
Guys, this was the BEST profile for farming SoEP and EoTS, is this working even with the latest versions of DB / Trinity ?
As i change things within the Trinity package, DB does nt load Trinity plugin anymore. Are there new instructions to make it work?
 
I want to only farm SoEP (Aughild set) + IWD (Asheara set), But not the other one, Which would i run? The different packs are kind of confusing.. Should i just run the main one that farms both?

Which should i pick? :P Thanks.
 
Would love to see this working again, I know geeklien above me said thanks, and apparently got it working, But i have no idea where i would put any of those files, Can someone post a Pack of the finished/working profiles/plugins? <3
 
Nirvana9832 said:
Would love to see this working again, I know geeklien above me said thanks, and apparently got it working, But i have no idea where i would put any of those files, Can someone post a Pack of the finished/working profiles/plugins? <3
Click to expand...

>member since 2012, doesn't know QuestTools goes in Plugins and the profile goes in profile folder
 
koolplay said:
gorm already posted a fix for this, find his post get his profile, then make the necessary changes to this file in quest tools

https://www.assembla.com/code/gorm-...mmit/6fcbf4ed0f3bbcc99afd70b12881255b99872870
Click to expand...

Edit: thanks geeklien, I have now gotten it to work (i think, will watch it to see pathing) with those files. I am worried about ezupdater and updating quest tools though, how can I make it work? I tried copying only the quest tool files that werent already in my db quest tools folder and it did not work, had to replace all of them.
 
Last edited:
Guys, I am running Demonbuddy v1.1.1898.362.
I put your QuestTools in the usual place \Plugins.
I loaded the profile.
All that I see is the bot opening and closing the game, repeatedly, without doing enything.
Just a question, which version o Trinity should I run? Should I put the Trinity plugin linked at the beginning of the post? (Because if i do so, my DB does not see my Trinity anymore).
 
INElutTabile said:
Guys, I am running Demonbuddy v1.1.1898.362.
I put your QuestTools in the usual place \Plugins.
I loaded the profile.
All that I see is the bot opening and closing the game, repeatedly, without doing enything.
Just a question, which version o Trinity should I run? Should I put the Trinity plugin linked at the beginning of the post? (Because if i do so, my DB does not see my Trinity anymore).
Click to expand...

Ok, this is really AWKWARD. I just forgot to set the correct quest. Act II, Q5.1.
Looks like it is working now.
 
geeklien said:
del Quest tools
copy this one
del CompiledAssemblies Dir

reopen DB
Click to expand...
Working for me. thanks a lot. :)

Is it correct that he is only doing the Sewer of Caldeum? Can he actually find both mats there?
 
Chawy said:
System.Exception: Element DungeonExpFoundObjOrFullyExped is not supported. Please check your XML and try again. (<DungeonExpFoundObjOrFullyExped questId="1" stepId="1" until="ObjectFound" actorId="80447" objectDistance="40" boxTolerance="0.38" boxSize="14" ignoreMarkers="False" forceResetMax="0">
<IgnoreScenes>
<!-- Ignoring dead end for SoEP event -->
<IgnoreScene sceneId="31026" />
<!-- Ignoring waypoints -->
<IgnoreScene sceneId="31035" />
<IgnoreScene sceneId="31027" />
<!-- Ignoring unwanted dead ends and exits -->
<IgnoreScene sceneId="31036" />
<IgnoreScene sceneId="31008" />
<IgnoreScene sceneId="174054" />
<IgnoreScene sceneId="174055" />
<IgnoreScene sceneId="174056" />
<IgnoreScene sceneId="174057" />
</IgnoreScenes>
</DungeonExpFoundObjOrFullyExped>) Line 29
в ..(PropertyInfo , XElement , Object )
в Zeta.XmlEngine.XmlEngine.Load(Object obj, XElement element)
в ..(XElement , Type )
в ...(XElement )
в System.Linq.Enumerable.WhereSelectEnumerableIterator`2.MoveNext()
в System.Collections.Generic.List`1..ctor(IEnumerable`1 collection)
в System.Linq.Enumerable.ToList[TSource](IEnumerable`1 source)
в ..(XElement , PropertyInfo )
в ..(PropertyInfo , XElement , Object )
в Zeta.XmlEngine.XmlEngine.Load(Object obj, XElement element)
в Zeta.Bot.Profile.Profile.Load(XElement element, String path)
в Zeta.Bot.Profile.Profile.Load(String path)
в Zeta.Bot.ProfileManager.Load(String profilePath, Boolean rememberPath)
Click to expand...

Getting this error with latest beta for db + qt (2.0.82) + trinity (1.9.8)
 
tried a fresh install just to confirm the issue and now it can't even find the file. Grrr.. It's there just waiting in the location it's searching for..

Code: 
Logging in...
Attached to Diablo III with pid: 6100
Flashing window
Compiler Error: c:\Users\kron\Downloads\Demonbuddy\Demonbuddy - Shard Runs (beta)\Plugins\Trinity\Movement\TmxkMiniMapMarker.cs(19,49) : error CS0246: The type or namespace name 'MiniMapMarker' could not be found (are you missing a using directive or an assembly reference?)
Compiler Error: c:\Users\kron\Downloads\Demonbuddy\Demonbuddy - Shard Runs (beta)\Plugins\Trinity\Movement\TmxkMiniMapMarker.cs(28,30) : error CS0246: The type or namespace name 'MiniMapMarker' could not be found (are you missing a using directive or an assembly reference?)
Compiler Error: c:\Users\kron\Downloads\Demonbuddy\Demonbuddy - Shard Runs (beta)\Plugins\Trinity\Movement\TmxkMiniMapMarker.cs(73,25) : error CS0246: The type or namespace name 'MiniMapMarker' could not be found (are you missing a using directive or an assembly reference?)
Compiler Error: c:\Users\kron\Downloads\Demonbuddy\Demonbuddy - Shard Runs (beta)\Plugins\Trinity\Movement\TmxkMiniMapMarker.cs(178,28) : error CS0246: The type or namespace name 'MiniMapMarker' could not be found (are you missing a using directive or an assembly reference?)
 
You must log in or register to reply here.
Back
Top