What's new
By:
  • Visit Rebornbuddy
  • Visit Panda Profiles
  • Visit LLamamMagic
  • Visit Resources
  • Visit Downloads
  • Visit Portal
RebornBuddy Forums

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

HB ARCHIVES: TheBrodieman's Profile Compendium--DO NOT DELETE

Tried running Tillers dailies today and got this:

[Brodies Plugin] Profile Swapper: Load Profile: D:\[zzzzzzzzzz]\HB\Default Profiles\TBMC\Reputation\TMOPDE\[Rep] Tillers Dailies [Brodie].xmlChanging current profile to The Tillers ($Rev$)
[Brodies Plugin] Profile Swapper: Load Profile: D:\[zzzzzzzzzz]\HB\Default Profiles\TBMC\Reputation\TMOPDE\[Rep] Tillers Dailies [Brodie].xml done
[Brodies Plugin] Profile Swapper: Init Done
[Singular] info: Pull Distance set to 100 yds by Questing, Plug-in, Profile, or User
[Profile Message]: Compiling Tiller Quests...
[LoadProfile-v1085(info)] Loading profile '[Rep] Tillers PreReqs [Brodie].xml'
Changing current profile to Tillers PreReqs ($Rev$)
[Profile Message]: Compiling Tiller PreReq Quests...
Could not find quest giver NPC with ID 58721 in database.
Bot stopping! Reason: Could not create current in quest bot!
Rarekiller: Had to Blacklist 0 permanently
Click to expand...

I've done the PreReqs but it keeps trying to load them? I'm close to revered too :(
 
Gold_Goblin said:
I started WoW, launched HB, selected TBMC check box under plugins (and dialog box says it is updated), then highlighted the plugin and clicked settings. Once your UI pops up I select Dailies-->enable dailies-->pick the Serpent/Celes dailies then click start in TBMC UI. The log I posted earlier was from doing exactly that. I believe my toon ran to the Arboretum (serpent dailies hub) then hearthed back. I didn't stop it because I wanted the full log for you. A pop up box saying TBMC is done with the options to continue or stop bot then pops up. If I click continue, then the HB dialog box says "stopped bot nothing more to do". Clicking start again on HB just gives me the same message, "nothing more to do".

I'll try to get it to do more and get a log for that, I'm at work right now though.
Click to expand...

Were there any dailies available?
Have you done the pre-reqs?
 
Klikster said:
Tried running Tillers dailies today and got this:



I've done the PreReqs but it keeps trying to load them? I'm close to revered too :(
Click to expand...

Clear your cache as per the instructions on page 1 (to include WoW cache and WoW data cache)
 
Humm not sure why but im not doing spell avoidances for shaoho mobs anymore. seems it used to, or I may have used a different Shaoho rep profile
 
tyriekfv said:
Humm not sure why but im not doing spell avoidances for shaoho mobs anymore. seems it used to, or I may have used a different Shaoho rep profile
Click to expand...

Profiles don't do spell avoidance. The plugin does spell avoidance. If your plugin is not working properly (or not on) then it will not work.
 
Ok, I completely deleted all Brodieman stuff and reinstalled from a fresh zip file. After placing the extracted folder in my plugins folder, I started HB. Everything seemed fine, Brodieman plugin auto updated according to dialog box. HB told me to restart so I did. I checked the plugin box, then highlighted it and clicked on settings. The Brodieman UI popped up. I clicked "enable dailies" then clicked on Cloud Serpent box to turn it blue. Then I clicked the "start dailies" button from within Brodieman UI. Toon was stationed in Shrine, and he flew to the Arboretum (CS daily hub). After standing there for about 5-10 seconds he tried to hearth back. Then the popup box that says 1) Is Brodieman activated 2) 3) etc came up. If I clicked "continue" then HB stopped anyway and said "nothing more to do".

When I tried any other dailies, basically the same thing happens.

I attached a couple of logs to try to give you the best representation of what may be going on.


View attachment 120538
View attachment 120539
View attachment 120536
View attachment 120537

edit: format
 
Hey Brodie, I have a problem with doing dailies in general. What happens is; everything works fine. Accepting first quests, killing mobs and so on. But then, when running back to the quest giver to turn in, this happens:
- Toon runs towards quest giver, ignoring ALL mobs it pulls.... so we get a train of mobs behind me
- It reaches the quest giver, THEN realizes it's is combat and starts attacking
- Just before it starts attacking the train of mobs, it tries to complete the quest @ questgiver
- Combat starts; killing all mobs
- Toon continous to next quest hub/giver without actually handing in the quests, so it stalls afterwards (no quests, questgiver not there etc)

This happens every time, especially doing Isle of Thunder dailies. I can not use it that way; I have to stop the bot, hand them in myself, and start in again. Then all is fine, until next quest hub and the same thing happens again,
Why does the bot not check if it actually handed in the quest?
 
Soeski said:
Hey Brodie, I have a problem with doing dailies in general. What happens is; everything works fine. Accepting first quests, killing mobs and so on. But then, when running back to the quest giver to turn in, this happens:
- Toon runs towards quest giver, ignoring ALL mobs it pulls.... so we get a train of mobs behind me
- It reaches the quest giver, THEN realizes it's is combat and starts attacking
- Just before it starts attacking the train of mobs, it tries to complete the quest @ questgiver
- Combat starts; killing all mobs
- Toon continous to next quest hub/giver without actually handing in the quests, so it stalls afterwards (no quests, questgiver not there etc)

This happens every time, especially doing Isle of Thunder dailies. I can not use it that way; I have to stop the bot, hand them in myself, and start in again. Then all is fine, until next quest hub and the same thing happens again,
Why does the bot not check if it actually handed in the quest?
Click to expand...

TurnIn not recognizing that a quest was/was not properly turned in sounds like an HB issue moreso than a profile issue.

I've reworded the Disable/Enable to expand around the turnins instead of just the travel and wait. That should keep it from running out after things, but I don't know about the TurnIn bit for sure.
 
thebrodieman said:
TurnIn not recognizing that a quest was/was not properly turned in sounds like an HB issue moreso than a profile issue.

I've reworded the Disable/Enable to expand around the turnins instead of just the travel and wait. That should keep it from running out after things, but I don't know about the TurnIn bit for sure.
Click to expand...
Thanks, will try it out when servers+HB are back up!
 
with HB .725 it looks that my toon dont fight back when they do the trillers plants. seeding the songbells but as soon there is a bird or other mob, my toon doesnt fight back. with .724 of HB it worked perfect.
 
tumbum said:
with HB .725 it looks that my toon dont fight back when they do the trillers plants. seeding the songbells but as soon there is a bird or other mob, my toon doesnt fight back. with .724 of HB it worked perfect.
Click to expand...

HB is attempting to, at almost all interaction commands, interact with a nonexistant pet. This bug comes around every here and there, but is, unfortunately, not profile related. I would recommend a fresh install.
 
With the new HB from today I get an error from your Plugin. Did i something wrong ? Fresh folder and files. Still "Loaded TheBrodieMan's Compendium Plugin v1.4.0
Please Wait While [Brodies Plugin] Checks For Updates, This MAY Take Several Minutes"
"Unable to run [Brodies Plugin] update process
Unable to run [Brodies QB Updater] update process
Unable to run [Brodies Profile Updater] update process"

Edit: If i use HB 2.5.9652.723 and use the updeted files from this Version. Iam able to start your Profile even with the new version of HB :confused:
 
thebrodieman said:
HB is attempting to, at almost all interaction commands, interact with a nonexistant pet. This bug comes around every here and there, but is, unfortunately, not profile related. I would recommend a fresh install.
Click to expand...

as is told, it was a fresh installation. and after the first installation i did another one, and still the same problem. never got this problem before .725
 
tumbum said:
as is told, it was a fresh installation. and after the first installation i did another one, and still the same problem. never got this problem before .725
Click to expand...

No changes have been made to the target ids or interaction mob ids or anything in the past few months. I don't see anything in the patch notes of 725 to note major changes in how InteractWith or Singular are working either. I do not know why HB is ignoring the profile's command to interact with "A" and instead interact with "B", where B is always "Level (your level) (your class) pet".
 
Ryuujisama said:
With the new HB from today I get an error from your Plugin. Did i something wrong ? Fresh folder and files. Still "Loaded TheBrodieMan's Compendium Plugin v1.4.0
Please Wait While [Brodies Plugin] Checks For Updates, This MAY Take Several Minutes"
"Unable to run [Brodies Plugin] update process
Unable to run [Brodies QB Updater] update process
Unable to run [Brodies Profile Updater] update process"

Edit: If i use HB 2.5.9652.723 and use the updeted files from this Version. Iam able to start your Profile even with the new version of HB :confused:
Click to expand...

Always send log files.
HB Output tells me nothing on why.
And do not drag and drop my plugin from old installs, it leaves behind key files.
 
thebrodieman said:
No changes have been made to the target ids or interaction mob ids or anything in the past few months. I don't see anything in the patch notes of 725 to note major changes in how InteractWith or Singular are working either. I do not know why HB is ignoring the profile's command to interact with "A" and instead interact with "B", where B is always "Level (your level) (your class) pet".
Click to expand...

Also having this issue, may be worth looking into. It is constantly re-targetting the occupied soil or alluring plants, ignoring the mobs hitting you. This is the first time having this issue, and only after the new patch. Doing this on all of my chars, ones with -and- without pets. All other Brodie functions are working properly but tillers. Fresh install does nothing. Logs show nothing but "Moving to harvest" and I have a army of mobs following me.
 
You must log in or register to reply here.
Back
Top