What's new
By:
  • Visit Rebornbuddy
  • Visit Panda Profiles
  • Visit LLamamMagic
  • Visit Resources
  • Visit Downloads
  • Visit Portal
RebornBuddy Forums

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

HB ARCHIVES: Singular--DO NOT DELETE

dna9418 said:
Sorry!must have forgot,anyway here is log and the example should be in the log during questing trying to do "the fall of Shai Hu" it attacked him once then after Shai Hu casted a spell that pushed me upwards bot stopped attacking,this also happened with another quest where i got feared then it stopped attacking.Now after being killed 3 times bot just stands there doing nothing.View attachment 97616
Click to expand...
dna9418, Thanks for the log! I recommend running with the Class Config setting Debug Logging as true while you are encountering issues. This will enable additional diagnostics logging that will provide additional detail in the file you provide that should allow researching most issues. Unfortunately this log was created with that setting as false. The behavior you described and the messages contained however appear to correspond to an issue in HB where aggroed targets were not appearing in the TargetList. Additionally targets which were not aggroed would appear once combat began. Update to the latest Beta and this particular issue should be fixed. -Bobby53
 
Jimgnarkill said:
When on a frost mage singular faces the wrong direction and attempts to spam spells, works fine if i spin him around or if the target isnt melee

View attachment 97624
Click to expand...
Jimgnarkil, Thanks for the log file. Your Frost Mage was not facing because you were running with the following setting:
Code: 
[22:20:10.404 V] [Singular]   AllowMovement: None
Facing is considered movement, so if you turn movement off it will not face. Thanks again for the post and good luck with your Mage, Bobby53
 
solo1420 said:
Using Questing bot hasn't worked for around a week. Tried the last three Singular revisions with no luck.
Toon will initiate attack on mob(s) and stand there and die. Log attached.
Not sure if it is a botbase issue or singular.
Thanks for all your hard work bobby.
Click to expand...
solo1420, Thanks for the post with log file. To be certain you would have to run with the following Class Config settings:
Debug Logging = true
Debug Trace = true
Click to expand...
The occurrences I have seen are due to Singular not being called for Pull or Combat because of an issue in HonorBuddy TargetList filtering which is causing quest mobs in certain states to not be added to the TargetList (mobs in combat with other npc's is an example.) The result is the character will stand in place doing nothing and the Combat Routine not being called. Some combat routines not written to work specifically with questing will target anything nearby and may still work. However Singular works from the TargetList so HonorBuddy, Questing, and Quest Behaviors have full control over what is targeted and when allowing the ability to carry out complex strategies. Keep an eye out as this should be fixed in HonorBuddy soon. Additionally the next release of Singular will include logic so when Debug is enabled it will warn when Singular is not being called -Bobby53
 
SkiCycleFun said:
View attachment 97676After recent update my druid gatherer uses gryphon mount instead of flight form...never had a problem with this before????
Click to expand...
Mounting and mount selection is handled by HonorBuddy. If you continue to have an issue you'll want to post in the HonorBuddy Support Issues thread. Singular is a Combat Routine and only handles what occurs when fighting or healing. Thanks and good luck with your Druid, Bobby53
 
Phelon said:
Bobby, please make move behind target optional. It really hoses things up with dungeonbuddy. Thanks!
Click to expand...
Phelon, Thanks for the suggestion, but in working with Highvoltz there were only certain bosses where moving behind the mob was an issue. A list is maintained by Singular of specific mobs that it should not move behind and that feature is automatically disabled. If you are encountering a problem with moving behind a mob, please post a log and provide the logmark / time that the problematic movement occurred. If you are saying its a general issue and not related to a specific mob / encounter, please provide that info and elaborate on the problem occurring. Thanks for the post, Bobby53
 
Phelon said:
Essentially what happens is that it gets "stuck" and stutter steps while trying to move around the target. It seems to happen with any botbase with movement enabled. I apologize but I do not have a log mark, although I did get you a snippet. The log I provided is riddled with the stuck problem.

http://www.thebuddyforum.com/honorb...ues-when-not-stuck-dungeonbuddy-singular.html
Click to expand...
Hmmm... I haven't seen that one. Thanks for passing along and will look into this further after getting current changes pushed. -Bobby53
 
*NEW* Singular 3.0.0.2661 available for download!

Change History for this release appears below. Complete Change History as always is included in the .ZIP

See the Reporting Bugs [CLICK HERE] post for details on how to request assistance, post about a problem, or ask questions about the behavior of your botting session with Singular.

Still receiving too many bug/question posts regarding behavior users watched that don't contain a complete log file and point of reference to when a single event happened. So, no multi-color bright lights this time. Just a simple request to provide the detail.

Don't forget to use the LOGMARK! button. It is located on the Class Config window and will place a mark in the log file making it easy for you to indicate when something happened that you have a question about or problem with. This button provides the same behavior as the LOGMARK plugin. Having a problem while running Singular that you want to report? Click the LOGMARK button immediately when you notice. A line will be added to the log file at that time and now you have a very accurate way to let me know when the problem occurred.

Ok, now that's out of the way:

- Download the latest version of Singular.ZIP from Post #1 in this thread

- .ZIP in Singular thread will always be the current version

- HonorBuddy will contain an older version until a new release of HB posts

Any post must include a debug log file (a file created with Debug Logging set to true.) To do this, click Class Config and set the Debug Logging option to 'true' then run until you create the issue again. The resulting log file will contain more info than a standard log file which will be essential in understanding the decisions being made by Singular which you weren't expecting.

As always, the prior version is still available for download. If you encounter a problem due to the new release of Singular you can always downgrade as needed.

--- Release 3.0.0.2661 ---

General

*new* - Singular will now warn how long since it has been called by the BotBase when you press Stop if more than 5 seconds and character not mounted, flying, etc.

*new* - When Debug Logging is true, Singular will now warn periodically if BotBase has not called Singular in 20 seconds. This helps in identifying when nothing happens whether it is a Combat Routine issue or something occurring elsewhere.

fixed - Interrupt All: was targeting mobs nearby mobs which were casting spells but were not in combat with you

fixed - when resting while in water, will no longer issue a message about having no food/water.

fixed - targeting of aggroed mobs changed to work from TargetList rather than any nearby mob

fixed - Pending GetPendingCursorSpell api fixed and now returns correct value

change- Singular previously used framelocks wrapping each behavior. It now defaults to using no behavior-wide framelocks and leaves this primarily for the botbase to determine when it should be used/avoided.

*new* - Use FrameLock setting in Class Config which allows you to force prior Singular behavior. Defaults to false


Priest

fixed - Discipline - was switching targets for Atonement Healing when Disable Targeting was on

fixed - Shadow - was not waiting for channelled casts to complete, so would recast Mind Flay after GCD when a Mind Flay was already in progress


Rogue

fixed - All Specs - lock picking fixed by virtue of GetPendingSpellCursor now working
Click to expand...

Worth mentioning one more time due to the large number of posts without log files that are received, but you must attach a complete debug log with any post. Please see the link at the top of this post for details.
 
Last edited:
hey bobby53 when wil u create an option for rogue to be always out of stealth while lvling because im lvling a rogue as combat and sometimes when he is in stealth he makes weird strafe moves to left right
 
it still just stands ther eand do auto atack and i did get the new sing

i use this version of HB Honorbuddy 2.5.7284.634

i only add kicks quest and the new singular

i tryede to get new singular and its the same i turned on debug so here is the log file

View attachment 97777
 
Spawn1975 said:
it still just stands ther eand do auto atack and i did get the new sing

i use this version of HB Honorbuddy 2.5.7284.634

i only add kicks quest and the new singular

i tryede to get new singular and its the same i turned on debug so here is the log file

View attachment 97777
Click to expand...
Spawn1975, Thanks for the post with log file. The issue as described sounds like the known HB issue. To be certain you would have to run with the following Class Config settings:
Debug Logging = true
Debug Trace = true
Click to expand...
The occurrences I have seen are due to Singular not being called for Pull or Combat because of an issue in HonorBuddy TargetList filtering which is causing quest mobs in certain states to not be added to the TargetList (mobs in combat with other npc's is an example.) The result is the character will stand in place doing nothing and the Combat Routine not being called. Some combat routines not written to work specifically with questing will target anything nearby and may still work. However Singular works from the TargetList so HonorBuddy, Questing, and Quest Behaviors have full control over what is targeted and when allowing the ability to carry out complex strategies. Keep an eye out as this should be fixed in HonorBuddy soon. Additionally the next release of Singular will include logic so when Debug is enabled it will warn when Singular is not being called.

Don't forget to specify WHEN the problem occurred. See Post #4 on Reporting Bugs for a description on how to provide the time something happeened or more simply a LogMark. -Bobby53
 
Some bug with Singular...

Last stable version of honorbuddy as from today

Warlock Destruction is not using Chaos Bolt, only uses Immolation and Rain of Fire as damage spells.

Can someone help me?
 
Got Problems with my WL and using Quest Bot. In this Quest he has NPCs as Pets, but my WL trys all the time to summon his own Pet, but its not possible to do this.
So the Profile cant go on and get stuck here. Just let it run last Night and i got 20 Logs like this after starting the Profile he gets an exception with Singular.

maybe its possible to implement something like, if Toon cant summon Pet for 5-10 times blacklist this for 10-15Minutes. In this time most of this kind of Quests are done and he summon his own Pet again after he is finish?!
 

Attachments

  • 15628 2013-06-30 08.56.zip
    15628 2013-06-30 08.56.zip
    23.9 KB · Views: 18
  • FTNS001-Honorbuddy-CAVADefault ProfilesCavaCava_Starter_Profiles.webp
    FTNS001-Honorbuddy-CAVADefault ProfilesCavaCava_Starter_Profiles.webp
    154.8 KB · Views: 35
I upgraded to the stable release and holy pally still isn't healing self in battle. Do I need to upload a new log or is the first one still fine?
 
Hello

I level a hunter with Kicks profile. I have one problem. If he have many mops he always go to a save area. So he not fight and is dead always. Can i change it , because he cant solve a quest with many mops, so i must do it always manual.

Sorry for my bad english.

Regarts Spider
 
You must log in or register to reply here.
Back
Top