What's new
  • Visit Rebornbuddy
  • Visit Panda Profiles
  • Visit LLamamMagic
  • Visit Resources
  • Visit Downloads
  • Visit Portal
RebornBuddy Forums

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

HB ARCHIVES: Kick's Old Posts Thread--DO NOT DELETE!

Status
Not open for further replies.
Hello again!
I seemed to have stumbled on another problem.
Quest "Shizz Work"-> bot kills the boars and moves on to the next one. Its not looting the poo from the ground after the Fel guard hound has eaten em, so theres no chance to get the key.
Also the bot likes to just float in front of deranged helboars instead of attacking em when doing this quest.
Log attached.

Cheers!

Hi, Joba, and thank you very much for the report and the log!

I believe both problems (not dismounting, and not searching poo) have been repaired in v2419.

thanks again!
chinajade


[size=-2]Ref: [post=1175207]Joba's original post w/log[/post][/size]
 
I'm having an issue on more than 1 Alliance toons. Both are a mage and warlock. I haven't tested any other classes, but any how here is my issue. Both in the 20's questing in Redridge they are just standing in the same spot. They don't move even after restarting HB, wow and a complete reinstall of HB.
View attachment 94115

Hi, Klb2948, and thanks for the log.

Turns out not to be a profile issue...

[19:56:57.958 D] [SupTar] EXCEPTION: System.NullReferenceException: Object reference not set to an instance of an object.
at SupremeTargets.SupremeTargets.Pulse() in c:\Users\Kevin\Desktop\Honorbuddy 2.5.7094.573\Plugins\supremetargets\SupremeTargets\SupremeTargets.cs:line 88
[19:56:58.007 N] Moving to Type: QuestPickUp
[19:56:58.157 D] [SupTar] EXCEPTION: System.NullReferenceException: Object reference not set to an instance of an object.

...<rest of log filled with this>...

Your SupremeTargets plugin has gone nuts and preventing Honorbuddy from executing the profile. Please delete the plugin out of your Honorbuddy/Plugins/ folder, restart Honorbuddy, and you should be off and away again.

cheers,
chinajade



[size=-2]Ref: [post=1175335]Klb2948's original post w/log[/post][/size]
 
Kick, your DK profile is not doing very well, Doing the quest "If Chaos Drives, Let Suffering Hold The Reins" (not even at lvl 56) it is constantly dying. It is because there's an elite - "Stable Master Kitrik" - which roams that area, and kills it. I'm thinking you need something in there to avoid that mob.

EDIT: After finally getting passed that bit it seems ok.

EDIT2: Also seems to start dying again at the boat where you have to kill 100 mobs with the cannon... I'm not sure how, but I had to stop the bot and do that quest manually, I've attached the log up until after I finished that quest and hit start again (which is where it's spamming to repair in the log). Log Attached.View attachment 94180

Hi, Lautaro, and thanks for the log.

As to your first problem...
We're aware of that problem. It has to do with the way the mobs are distributed in that area. Unfortunately, we can't blackspot the area, because its needed for other quests. The problem only happens occasionally, and indeed it is an inconvenience, but we've not ready solution at the moment.


The second problem also happens occasionally and it is out of the profile's control...
[08:31:00.071 D] Could not generate path from {2206.219, -6154.167, 39.79193} to {2343.04, -5721.99, 154.045} (time used: 0 milliseconds) @ FindStartPoly
[08:31:00.471 N] Moving to Type: Repair, Name: Hargus the Gimp

The profile is suspended when Honorbuddy decides it wants to repair. You were in an area, the profile needs to explicitly tell Honorbuddy how to get back to civilization when its done with the quest. Yet, Honorbuddy suspended the profile to go repair. This is a catch-22 situation, and does happen occasionally. Alas, there is absolutely nothing the profile can do about it, since it is not running when this situation occurs.

cheers,
chinajade



[size=-2]Ref: [post=1175887]Lautaro's original post w/log[/post][/size]
 
Hi, Lautaro, and thanks for the log.

As to your first problem...
We're aware of that problem. It has to do with the way the mobs are distributed in that area. Unfortunately, we can't blackspot the area, because its needed for other quests. The problem only happens occasionally, and indeed it is an inconvenience, but we've not ready solution at the moment.


The second problem also happens occasionally and it is out of the profile's control...
[08:31:00.071 D] Could not generate path from {2206.219, -6154.167, 39.79193} to {2343.04, -5721.99, 154.045} (time used: 0 milliseconds) @ FindStartPoly
[08:31:00.471 N] Moving to Type: Repair, Name: Hargus the Gimp

The profile is suspended when Honorbuddy decides it wants to repair. You were in an area, the profile needs to explicitly tell Honorbuddy how to get back to civilization when its done with the quest. Yet, Honorbuddy suspended the profile to go repair. This is a catch-22 situation, and does happen occasionally. Alas, there is absolutely nothing the profile can do about it, since it is not running when this situation occurs.

cheers,
chinajade



[size=-2]Ref: [post=1175887]Lautaro's original post w/log[/post][/size]

Chinajade,

Please re-read what my problem was, repair was not the issue, it only tried to do that after I restarted the bot after I manually did the quest i'm talking about.. I stopped the bot at 08:29:15. I restarted the bot at 08:30:58 after I killed the 100 mobs with the cannon and was flying away on the skeletal gryphon or whatever it is, which is why it cannot get the route to repair. I am pretty sure the problem starts at 08:26:59.

ORIG POST: "EDIT2: Also seems to start dying again at the boat where you have to kill 100 mobs with the cannon... I'm not sure how, but I had to stop the bot and do that quest manually, I've attached the log up until after I finished that quest and hit start again (which is where it's spamming to repair in the log)."
 
Last edited:
Hey Orc, I've had a Similar issue in the past. Run your LazyRaider with the setting "Run without Tank" and turn Framelock off and give it another shot. If it keeps doing it test another CC first.

I had pretty good results with Superbad, a few issues with Guardian (evo). As far as technical support goes I cant be of much help but from previous experience with a Feral hopefully that'll help!
 
Chinajade,

Please re-read what my problem was, repair was not the issue, it only tried to do that after I restarted the bot after I manually did the quest i'm talking about.. I stopped the bot at 08:29:15. I restarted the bot at 08:30:58 after I killed the 100 mobs with the cannon and was flying away on the skeletal gryphon or whatever it is, which is why it cannot get the route to repair. I am pretty sure the problem starts at 08:26:59.

ORIG POST: "EDIT2: Also seems to start dying again at the boat where you have to kill 100 mobs with the cannon... I'm not sure how, but I had to stop the bot and do that quest manually, I've attached the log up until after I finished that quest and hit start again (which is where it's spamming to repair in the log)."

Hi, Lautaro, and thanks for following up.

I'm sorry I didn't understand the problem you were trying to relay. I've run this profile about two dozen times within the last two months, and have never encountered a situation like you did:

[08:27:08.734 D] Activity: Spanking Scarlet Fleet Defender that has targeted us.
...
[08:28:11.580 D] Activity: Spanking Scarlet Fleet Defender that has targeted us.

Apparently, you had a glitched mob 'locked on to you'. And, when Honorbuddy was free to do so after the ride in the mining cart, it decided to deal with him. It looks like this would've repeated as long as Honorbuddy was running.

Although it looks like a WoWclient glitch, I altered the profile in v2421 to prevent the toon from attacking at that point. It should now walk to the cannon and start using it--WoWclient glitch or not.

cheers,
chinajade
 
Okey so everytime i try to load a profile i get honorbuddy error? and in the honorbuddy i get a loooong text in red. But i attached my log.
MOST of my profiles doesnt work only a few,
Please can someone tell me how to fix this so i can use my bot again?
 

Attachments

Okey so everytime i try to load a profile i get honorbuddy error? and in the honorbuddy i get a loooong text in red. But i attached my log.
MOST of my profiles doesnt work only a few,
Please can someone tell me how to fix this so i can use my bot again?

Hi, Suzix, and thanks for the log.

Your problem really belongs in the Support forum.

But to get you going...
your Honorbuddy installation is damaged, and you need to do a 'clean install'. You can find the instructions for succeeding at it, here:
[post=1120664]HelpDesk: "Clean installing" Honorbuddy[/post]

If you continue to have problems after this, please follow up to the Support forum with a fresh log.

cheers,
chinajade


[size=-2]Ref: [post=1176111]Suzix's original post w/log[/post][/size]
 
Hey my bot wont move to the next questing area (stuck in Ashenvale and i'm lvl 30) how do i get my bot to move on? Just wanna be able to skip ahead since i use full heirlooms.

Edit: Have stop/start and cleared cache still nothing.
 
Last edited:
Hi its not a error but i hope you can help me.. My bot is not remembering the mount i have selected it is going onto random mount and not mounting it. So i type in a mount that i have and it uses it (mekgineer's chopper) but once i close the bot/restart the bot it completely forgets that i want to use chopper and starts going to random and not mounting again.
 
The following profile doesn't work any more: (kicks-scripts\Kick's Profiles\1-90 Questing Profile Pack\BC) [Fly][H - Quest] BC 58-70 [Kick].

Error message: Attribute name appears twice

screenshotf2u8b.png
 
Just to be clear. The bot moved to a location where there was no quest giver. If i manually moved him away, he would return to the location where there was no quest. While I did not spend time yet finding out if the quest was out of order, in a different location, or completely removed from the game?the bot was moving back to a specific location. Not sure if you knew that from the logs or not. Thanks!

I logged back in 24 hours later and the quest giver was there. I don't recall there being a countdown or wait timer for a quest to finish or any NPCs speaking. In any case the quest giver was there when I logged in the next day.
 
View attachment 8092 2013-05-31 03.41.txt

Running " [H - Quest] 12-58 K-EK [Kick] " I ran this last night for 4 hours and my guy just sits there. I thought to wait till the morning to try it out again, did a fresh install of HB and Kicks Profiles. Then ran it again like 5 min ago, still standing there. If you can help out that will be nice, I want to level this guy to 60 or maybe higher before I leave to Basic Training on the 11th. Also what plugins are best for leveling?

*Update*
Did a fresh install AGAIN same with the profiles.
This time i ran to ratchet with the bot on to see if it will move me somewhere. While on my way to ratchet the bot moved me back to the same place where i was standing around the last time.

View attachment 9012 2013-05-31 10.13.txt
 
Last edited:
The following profile doesn't work any more: (kicks-scripts\Kick's Profiles\1-90 Questing Profile Pack\BC) [Fly][H - Quest] BC 58-70 [Kick].

Error message: Attribute name appears twice

screenshotf2u8b.png

I get the exact same thing, works as alliance but not horde!
 
Yep, seems to be a bug..
also happens to me with a fresh install.
idk whats wrong with hb, hb in general was way better in the past now it just gets crappier and crappier...
 
Hi,

I only need one or two tips to configure my questing a little more better. When I use Kicks Profiles, must I hook on Flight Pathes and Find Vendors?
Could it be when I hook on Herbalism and Mining while questing, the bot get stuck therefore?

Thanks in Advance
 
Yep, seems to be a bug..
also happens to me with a fresh install.
idk whats wrong with hb, hb in general was way better in the past now it just gets crappier and crappier...

It's the profile not HB. If you go to the line referenced in the error and delete the 2nd MobId then the profile runs fine.
 
Status
Not open for further replies.
Back
Top