What's new
By:
  • Visit Rebornbuddy
  • Visit Panda Profiles
  • Visit LLamamMagic
  • Visit Resources
  • Visit Downloads
  • Visit Portal
RebornBuddy Forums

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

HB ARCHIVES: Honorbuddy Profile Pack--DO NOT DELETE!

ataran93 said:
Need some help, alliance Valsharah quests worked perfectly when coming from azsuna via the autoloader however the horde one just goes to dalaran

Goal: Picking Up Quest - Tying Up Loose Ends (Tying Up Loose Ends - Quest - World of Warcraft) : From - Archmage Khadgar (Archmage Khadgar - NPC - World of Warcraft) [Ref: "Pickup" @line 117]

there is no mob there, i even tried playing by hand for the first couple of quests and keeps doing exactly the same thing..

any chance i can somehow skip this quest within the questbot?

Thanks
Click to expand...
I don't see how this quest could have been skipped as it's required to enter Val'sharah.
What is the current Val'sharah quest that your Horde player is on?
 
snowmn313 said:
im guessing these are skinner or leatherworking quests
but my bot is going to hemet nesingwary to pick up quests ( The freedom to roam, highmountian hides )
all he does is open dialogue with hemet nesingwary then closes and reopens and it just loops over and over
Click to expand...
They are not.
There's a set of Nesignwary side-quests that are apart of the Highmountain story line.

Do you have a log for this?
 
gadsen1776 said:
I get an issue when running the bot 100-110. It is trying to do a quest where I need to use cannons to shoot down bats. I did that quest already. How do I skip this to move on? It logged me out at Icepine point

Info screen says this: Goal: UserDialog-UserDi: In Progress (no associated quest)
User Attention Required...
[Ref: "[N-Quest] Stormheim [Echo]" @line 125]

pop up screen says this: Currently the bot does not support the Mesh for the battleship

You must manually complete the quests up until after you shoot the bats down with the gun cannon.

Click Continue Profile after you're off the flying ship to continue the bot.
Click to expand...
The dialog message is improperly appearing - I believe this was fixed on the latest update earlier today.
 
Joker76 said:
Not sure if this is profile related, Singular, or quest behaviors. It seems to happen pretty often on all my toons - they run into the rez area, appear to look for a safe place and then run out of the rez area without ever rezzing. Over and over in a loop.

Code: 
We died, Clearing current POI
Clearing POI - Reason Player Died
Activity: Releasing from corpse
I died!
Moving to <2117.641, 6087.571, 99.95001> from <2074.79, 6123.83, 152.193>
Activity: Moving to corpse
Cleared POI
Moving to Type: Corpse, Loc: <2106.7, 6121.319, 156.652>, NavType: Run from <2120.239, 6122.148, 116.7613>
Latency to Buddy service: 115 ms
SafeRes timer expired!! Grabbing our corpse where we are!
Grabbing corpse
Stopped moving.
Grabbing corpse
Activity: Grabbing corpse
Clearing POI - Reason Res timer expired. Grabbed our corpse.
I don't want to move to <0, 0, 0>
Moving to <2117.641, 6087.571, 99.95001> from <2136.851, 6070.228, 152.7167>
Activity: Moving to corpse
Cleared POI
Moving to Type: Corpse, Loc: <2116.357, 6119.415, 160.3572>, NavType: Run from <2120.259, 6122.261, 116.7639>
SafeRes timer expired!! Grabbing our corpse where we are!
Grabbing corpse
Stopped moving.
Grabbing corpse
Activity: Grabbing corpse
Clearing POI - Reason Res timer expired. Grabbed our corpse.
I don't want to move to <0, 0, 0>
Moving to <2117.641, 6087.571, 99.95001> from <2148.491, 6089.578, 158.9239>
Activity: Moving to corpse
Latency to Buddy service: 113 ms
Cleared POI
Moving to Type: Corpse, Loc: <2141.706, 6086.944, 157.5055>, NavType: Run from <2120.256, 6122.243, 116.7635>
Stopped moving.
Activity: Grabbing corpse
Grabbing corpse
Clearing POI - Reason Grabbed corpse at safe spot
I don't want to move to <0, 0, 0>
Moving to <2117.641, 6087.571, 99.95001> from <2145.613, 6083.902, 157.1761>
Activity: Moving to corpse
View attachment 210956
Click to expand...
This would not be either Singular or QuestBehaviors.

There's an internal hook called "Death_Main" which handles this logic.
You would need to report this in the Honorbuddy bug thread.
 
Joker76 said:
Getting stuck on quest; Bitestone Enclave - Quest - World of Warcraft

Code: 
[23:03:28.390 D] Interacting with Manaspine Basilisk (Unit Id: 98653)
[23:03:31.415 D] Looting window did not open after interaction
[23:03:31.651 D] Interacting with Manaspine Basilisk (Unit Id: 98653)
[23:03:34.654 D] Looting window did not open after interaction
[23:03:34.886 D] Interacting with Manaspine Basilisk (Unit Id: 98653)
[23:03:37.909 D] Looting window did not open after interaction
[23:03:38.111 D] Interacting with Manaspine Basilisk (Unit Id: 98653)
[23:03:41.146 D] Looting window did not open after interaction
[23:03:41.344 D] Interacting with Manaspine Basilisk (Unit Id: 98653)
[23:03:44.409 D] Looting window did not open after interaction
[23:03:44.609 D] Interacting with Manaspine Basilisk (Unit Id: 98653)
[23:03:47.629 D] Looting window did not open after interaction
[23:03:47.824 D] Interacting with Manaspine Basilisk (Unit Id: 98653)
[23:03:50.885 D] Looting window did not open after interaction
[23:03:51.085 D] Interacting with Manaspine Basilisk (Unit Id: 98653)
[23:03:54.114 D] Looting window did not open after interaction
[23:03:54.313 D] Interacting with Manaspine Basilisk (Unit Id: 98653)
[23:03:57.342 D] Looting window did not open after interaction
[23:03:57.540 D] Interacting with Manaspine Basilisk (Unit Id: 98653)
[23:04:00.575 D] Looting window did not open after interaction
[23:04:00.776 D] Interacting with Manaspine Basilisk (Unit Id: 98653)
[23:04:03.819 D] Looting window did not open after interaction
[23:04:04.018 D] Interacting with Manaspine Basilisk (Unit Id: 98653)
View attachment 210957
Click to expand...
This seems to be an issue regarding the combat logic.
Make sure you're using Singular when running these profiles as other combat routines tend to not work correctly.

If the issue still persists, I'll need a fresh log to see what Singular's diagnostics say about it.
 
notorious879 said:
Guys, I would like the bot to Mount up between hotspot while leveling 100-110..? How can i make this possible..? Cause he's wasting some times cause he's not riding between mob.
Click to expand...
The bot should do this by default - if it's not, then this is an issue with the bot.
Try reporting this as a bug in the support section.
 
pixelsbot said:
Came here to say that these profiles took my new DH to 108 and how impressed I was with how fluent it went even though it's so early. It got stuck a few times but mostly just ran great. Awesome to hear you're working on adding 108-110 too EchoTiger. Care to share what that will involve? Just random quests not touched or something else? Keep up the great work!
Click to expand...
Thanks for the feedback. :3

These profiles were developed very early in the Legion beta.
During this time, a lot of the side quests were not included in the game.

So what will help go from 108 to 110 is all the missing side quests.
I've already added a chain in Stormheim which got my tester to 109 alone, and I'm currently adding two or three chains in Highmountain - then there's the other zones to check as well.

Also, I plan on adding Class Hall quest support where it will micro-manage doing missions between transitioning through the questing zones.

Once the artifact profiles are fully tested and AFKable - after the bot completes 100% of the quests and most of the class hall stuff - it will do all the artifact weapon quest lines for your class as well.
By then your player should be well over 110.
 
EchoTiger said:
I don't see how this quest could have been skipped as it's required to enter Val'sharah.
What is the current Val'sharah quest that your Horde player is on?
Click to expand...

I just had the same problem with my ret paladin. the bot apparently didnt take the scouting mission from my class hall board. did that manually and off we go again
 
Error:
PHP: 
[Profile Message]: Gossip with the injured Rainspeaker

PHP: 
Goal: RunLua-RunLua: In Progress (no associated quest)
    [Ref: "[Fly][H - Quest] 68-80 [Kick] ($Rev: 3932 $)" @line 11158]
 

Attachments

I'm having a problem with starting the Val'sharah profile. I already accepted the quests which bring me to the different druid guys in the zone itself... but now I can't select the quest from my scout map anymore.
The bot is waiting for Kadghar on the flight place in dalaran, but will not continue on...

I guess there's no log needed, since it wouldn't say anything, except waiting for npc to spawn.

Any idea how to fix this?
Thanks!
 
EchoTiger said:
The dialog message is improperly appearing - I believe this was fixed on the latest update earlier today.
Click to expand...

Still having an issue. Here is the Goal from the info tab

Goal: KillUntilComplete-KillUn: In Progress (no associated quest)
[Ref: "[N-Quest] Stormheim [Echo]" @line 812]

If Im in Dalaran, Bot just stares at the known flight paths. If I'm in SW, he mounts and begins flying to the middle of no where. I looked up the NPC Kill'UN and they are in Talador. Not sure why I would be heading there.

Edit: looked at the Cords, and I should be picking up a quest called "Assault the Drekirjar". Code not working maybe? Quest pick up cords Matches the cords where bot wants to go. My mount flew me to hillsbrad foothills before I stopped him.
 
Last edited:
Stuck doing nothing Guild hall for mages . the bot keeps saying it wants to interact with 98000 or Scouting Map. i did all the quests and it keeps going back to the guild hall just standing there.
 

Attachments

EchoTiger said:
Currently the "Objective" logic is broken due to Blizzard.
All Objective based quests are being converted to QuestBehaviors instead.
Click to expand...
Any ETA when this will be done?
It's not blizzard fault that your profiles not working as they should. It's been over a month when 7.0.3 dropped and "ruined" your objective logic. I know that your priority is 100-110 now but there is plenty of quests in BC and LK with this logic where bot running few hours for no reason
 
EchoTiger said:
I don't see how this quest could have been skipped as it's required to enter Val'sharah.
What is the current Val'sharah quest that your Horde player is on?
Click to expand...

I curently got A Village in Peril, Archdruid of the claw, Archdruid of the vale, Death to the Witchmother, Solid as a rock in valsharah.
 
Bot stuck on turning quest, trying to mount in place where its forbidden, after restart works fine, more like HB navigation problem
PHP: 
Goal: Turning in Quest - Into the Maw! (http://wowhead.com/quest=25617) : To - Jordan Olafson : ID - 40834 [Ref: "Turnin" @line 1426]
 

Attachments

You must log in or register to reply here.
Back
Top