HB ARCHIVES: Honorbuddy Profile Pack--DO NOT DELETE!

[chinajade]

I followed the steps you outlined in the wiki precisely. It then had to download about 6GB worth of data from Blizzard (some warning that was going to happen would have been appreciated). However, it hasn't changed anything, and I'm having the same exact issue. I attached the log here. Thank you.

Hi again, Peteyboy23, and thanks for the fresh log.

Alas, if its not a simple cache corruption problem, your quest state is seriously damaged. This will require some manual effort to get back in a usable state, if its at all possible. This article will walk you through the process:

[post=1356864]HelpDesk: Quest giver is not offering expected quest[/post]​

cheers,
chinajade



[size=-2]Ref: [post=1607863]Peteyboy23's original post w/log[/post][/size]

 

[azidtrip]

I keep getting a loop of repairing and visiting mailbox. The profile keeps running from burning steppes to pick up a repair associated to quest or something in the area, then progressing to redrigde mountains mailbox (Lakeshire) where it stops up with open mailbox and wait for taxi or waiting for flightmaster to respawn. I have cleared cache/meshes in both honorbuddy and wow, even disabled any new plugins and addons. Only plugins and addons running now is what I always used before and NEVER had this issue. I wont wait for a fix, but will progress manually or use brodieman or cava to get past this. But I hope you can look at it and fix any problems (if any) and/or give me advise aboout whats wrong. Added the 3 last logs for detailed information. I am certain this is a profile issue exclusively as it tries to wait for flightmaster to respawn while standing next to mailbox. Pretty weird. And NO, I will not reinstall the bot. I have settings for at least 20 chars if not more and np on other characters. Rather tell me how to fix it please.

 

[chinajade]

I then flipped to the 90 profile, since the 85-86 wasn't working, and he just stands around periodically. He'll kill a mob, maybe loot them, and then stop. If I stop and start the bot, he'll kill a mob, loot, maybe mine a node, then stop again. Log included.

Hi again, Peteyboy23,

I've studied both your logs for quite a while, and cannot figure out what is happening. Honorbuddy appears to just quit executing the profile directives.

It is possible that Singular's new "Pull More" feature is interfering with questing. Could you please disable this feature, and see if the problem persists?

If that yields no joy, the next step is a 'clean install'.

Honorbuddy:HelpDesk:"Clean installing" Honorbuddy​

cheers,
chinajade


[size=-2]Ref: [post=1607938]Peteyboy23's original post w/log[/post][/size]

 

[chinajade]

Started the file for leveling 80 - 82 and suddenly i've got this questbehavior error

Hi, Syphke, and thanks for the log.

The questing part of your Honorbuddy installation is damaged. You will need to do a 'clean install' to correct he problem:

Honorbuddy:HelpDesk:"Clean installing" Honorbuddy​

cheers,
chinajade


[size=-2]Ref: [post=1608483]Syphke's original post w/log[/post][/size]

 

[chinajade]

Game client: v5.4.8.18414
Honorbuddy: v2.5.11389.746
Profile: [Fly][A - Quest] BC 58-70 [Kick]($Rev: 3450 $)
Issue: Profile stops ~ Level 68, Line 6574 due to Distance parameter.

[Fly][A - Quest] BC 58-70 [Kick] revision 3450
Lines 6574 and 6581 had a Distance of 100, which doesn't appear to be valid with this version of HonorBuddy.
I had to change the distance setting to continue. I chose 30. The specific error is:
[18:28:59.075 N] [FlyTo-v1622(error)]: The 'Distance' attribute's value (saw '100') is not on the closed interval [1.5..30]

---

My changes:

---

Logs:

Hi, Wifi,

Thanks for the contribution, but the problem has already been corrected in v3461.

cheers,
chinajade

 

[chinajade]

not sure this is the place to put it but hey What the heck i'm using the 1-525 (Q) Skinning profile thats in the pack an its not training it goes to her but don't get the new training log attached

Hi, Madcatz,

Thanks or the report, but we are unable to take corrective actions based on log file fragments.

cheers,
chinajade

 

[chinajade]

So basically, no more updates on the SVN, since all goes trough buddystore?
I rly liked the possibility to set Ignorecheckpoints=true, so the char does all the quests in the profile.
I guess this is no longer possible. OR?

Hi, Kmica,

With the introduction of Buddy Store, there is currently no way to alter these settings. We've had feature request HB-38 ("Add Profile Settings window to gui") open for a very long time. We've also opened bug report HB-1075 ("Inability to tune profile's mail/sell settings & IgnoreCheckpoints when streamed from BuddyStore") against this issue. With the introduction of the Buddy Store, the scope needed to be broadened, and it is now a 'bug' rather than 'feature'. No ETA on either.

cheers,
chinajade

 

[chinajade]

I'm having trouble running [Fly][H - Quest] BC 58-70 [Kick] profile I go to load the profile and my honorbuddy just keeps scrolling through errors and doesn't respond after that I have re installed twice already.

Hi, Rebel307, and thanks for the log.

You may have installed Honorbuddy a couple of times, but to repair the problem you must do a 'clean install'. This article will guide you through the process:

Honorbuddy:HelpDesk:"Clean installing" Honorbuddy - The Buddy Wiki​

Do not copy anything from a previous Honorbuddy installation, or you will be right back in the same boat.

cheers,
chinajade


[size=-2]Ref: [post=1611884]Rebel307's original post w/log[/post][/size]

 

[chinajade]

I am using the "[Fly][A - Quest] BC 58-70 [Kick]" profile and it has been working fine until my character gets stuck at one edge on Shatter Point and stays there without doing anything. If I stop the bot and start it again, the character mounts a flying mount, goes to Honor Hold and then takes a flight to Shatter Point again, mounts a ground mount and then goes to the same exact location, and stays there.

Here's the log: View attachment 139751

Hi, Remeblek, and many thanks for the log.

This problem is HB-1053 ("Honorbuddy confused about quest giver presence"), and has been repaired for the next (post-.747) Honorbuddy drop.

As a work-around, please do Forge Camp: Mageddon, turn it in, and start Honorbuddy again.

cheers,
chinajade


[size=-2]Ref: [post=1613122]Rameblek's problem report w/log[/post][/size]

 

[chinajade]

Twilight Highlands

[09:41:06.954 D] Goal: KitchenSink-vUnknown: "Everything But the Kitchen Sink" (http://wowhead.com/quest=28589)

This Quest use a QB. But this QB doesnt work with Framlock. I have to turn it off to do the Quest.
After Toon use the Vehicle the WoW Client freeze. I have to kill both, WoW and HB to restart.

Hi, Tumbum, and many thanks for the log.

We've opened bug report HB-1111 ("28589-HordeTwilightHighlands-EverythingButTheKitchenSink: Locks up HB & WoWclient if frame lock enabled") against the issue.

cheers,
chinajade


[size=-2]Ref: [post=1613386]Tumbum's problem report w/log[/post][/size]

 

[chinajade]

How can I stop this profile from doing low level quests? I always catch it doing that, and it's really slowing the leveling process.

Hi, Vinmic47,

This article addresses your question:

[post=1105561]HelpDesk: Quests are 'green' or 'gray'[/post]​

cheers,
chinajade

 

[chinajade]

Hi team, and thank you so much for these amazing, exhaustive FREE profiles, been using kick's for 4+ years and levelled 20+ toons using them.

Not a critical problem, but whilst running the Krasarang profile, every single toon Ive run through this in the last month or so (10 in total, all alliance) has got stuck trying to turn in Kang Bramblestaff, BEFORE doing The Arcanic Oubliette. This results in the toon running repeatedly into the barrier trying to get to Krang (who hasn't appeared yet) then healing or waiting til health recovers and running into it some more.

Every time, Ive had to complete the Arcanic quest manually to lower the barrier, hand that in, then the Kang npc appears for the previous turn-in and the bot does so.

Again not a big deal considering how much this gets right.

All done with clean installs, only singular and no added plugins, caches cleared etc.

Sorry if already been reported

(Sorry for the log size, I paused the bot instead of shutting it so log was still being written to)

Hi, Ciddative, and thanks so much for the report!

In v3463, we've deferred turn in of "Kang Bramblestaff" until after "The Aranic Oubliette" is complete.

cheers,
chinajade


[size=-2]Ref: [post=1615329]Ciddative's problem report w/log[/post][/size]

 

[chinajade]

Tried to load Kicks BC 58-70 Quest profile an dI get interminable red flag text and have to quit HB

View attachment 140019

Hi, Kandiman,

Your Honorbuddy installatino is damaged, and you need to do a 'clean install'. You can find the instructions here:

Honorbuddy:HelpDesk:"Clean installing" Honorbuddy - The Buddy Wiki​

If you are not off-and-away after making this correction, please attach your full log file. Partial logs are not acceptable.

cheers,
chinajade

 

[chinajade]

I keep getting a loop of repairing and visiting mailbox. The profile keeps running from burning steppes to pick up a repair associated to quest or something in the area, then progressing to redrigde mountains mailbox (Lakeshire) where it stops up with open mailbox and wait for taxi or waiting for flightmaster to respawn. I have cleared cache/meshes in both honorbuddy and wow, even disabled any new plugins and addons. Only plugins and addons running now is what I always used before and NEVER had this issue. I wont wait for a fix, but will progress manually or use brodieman or cava to get past this. But I hope you can look at it and fix any problems (if any) and/or give me advise aboout whats wrong. Added the 3 last logs for detailed information. I am certain this is a profile issue exclusively as it tries to wait for flightmaster to respawn while standing next to mailbox. Pretty weird. And NO, I will not reinstall the bot. I have settings for at least 20 chars if not more and np on other characters. Rather tell me how to fix it please.

Hi, Azidtrip, and thanks for the logs,

Your first log (5500 2014-08-24 03.46.txt) is a Tauren Paladin in Camp Narache not even running this profile pack:

[01:47:13.439 N] [Singular] Your Level 1 Tauren Lowbie Paladin Build is
[01:47:13.439 N] [Singular] ... running the Questing bot in Camp Narache
...
[01:47:16.571 D] Goal: RunMacro-v1581: In Progress (no associated quest)
Running macro 1 times
[Ref: "The Complete WoW Leveling Experience ($Rev$)" @line 10]​

Your second log (7564 2014-08-24 03.43.txt) Taren Paldain in Camp Narache:

[01:44:14.958 D] [ProfileCompatibilityInfo-v1581(debug)] ---------- BEGIN: Profile Compatibility Info ----------
Toon: 1.0 Tauren Paladin (Male, Horde)
Specialization: None
Location: Kalimdor => Camp Narache => Camp Narache => <-2915.55, -257.347, 59.2693>​

Your third log (6848 2014-08-24 03.24.txt) is a Tauren Paladin in Camp Narache:

[01:24:28.425 D] [ProfileCompatibilityInfo-v1581(debug)] ---------- BEGIN: Profile Compatibility Info ----------
Toon: 1.0 Tauren Paladin (Male, Horde)
Specialization: None
Location: Kalimdor => Camp Narache => Camp Narache => <-2913.313, -254.765, 59.52722>​

NONE of these logs shows the problem you describe. If you need assistance, we'll need to see the ONE log that captures your problem.

cheers,
chinajade


[size=-2]Ref: [post=1618231]Azidtrip's original post w/wrong logs[/post][/size]

 

[azidtrip]

Hi, Azidtrip, and thanks for the logs,

Your first log (5500 2014-08-24 03.46.txt) is a Tauren Paladin in Camp Narache not even running this profile pack:

[01:47:13.439 N] [Singular] Your Level 1 Tauren Lowbie Paladin Build is
[01:47:13.439 N] [Singular] ... running the Questing bot in Camp Narache
...
[01:47:16.571 D] Goal: RunMacro-v1581: In Progress (no associated quest)
Running macro 1 times
[Ref: "The Complete WoW Leveling Experience ($Rev$)" @line 10]​

Your second log (7564 2014-08-24 03.43.txt) Taren Paldain in Camp Narache:

[01:44:14.958 D] [ProfileCompatibilityInfo-v1581(debug)] ---------- BEGIN: Profile Compatibility Info ----------
Toon: 1.0 Tauren Paladin (Male, Horde)
Specialization: None
Location: Kalimdor => Camp Narache => Camp Narache => <-2915.55, -257.347, 59.2693>​

Your third log (6848 2014-08-24 03.24.txt) is a Tauren Paladin in Camp Narache:

[01:24:28.425 D] [ProfileCompatibilityInfo-v1581(debug)] ---------- BEGIN: Profile Compatibility Info ----------
Toon: 1.0 Tauren Paladin (Male, Horde)
Specialization: None
Location: Kalimdor => Camp Narache => Camp Narache => <-2913.313, -254.765, 59.52722>​

NONE of these logs shows the problem you describe. If you need assistance, we'll need to see the ONE log that captures your problem.

cheers,
chinajade


[size=-2]Ref: [post=1618231]Azidtrip's original post w/wrong logs[/post][/size]

I am not sure what happened according the logs. Might I did something wrong and selected older logs after uploading. Anyways, I add two new logs. I want to add, in one log it's problems as tabards are present in backpacks. I removed those keeping only heartstone there (also ditched all quests and restart bot+clear cache/meshes)) and it still got stuck at mailbox.

 

[electrician]

Somehow the bot stops saying- profile needs to be fixed, while running the argentcrusader dailyquests as horde

 

[Onitsha]

Best profil pack.
Very usefull

 

[jeppsson]

Hi, I started this pack at my lvl 29 horde hunter and when i load the 1-12 auto loader he runs to the orc starting grounds and starts to quest there. woud appriciate some help

Best regards Jeppsson

 

[electrician]

Hi, I started this pack at my lvl 29 horde hunter and when i load the 1-12 auto loader he runs to the orc starting grounds and starts to quest there. woud appriciate some help

Best regards Jeppsson

try put 12-60?!

or is your hunter level 1-12?

 

[d00mw01f]

Trallmar quests still bugged (over 1 year or more). Bot trying pickup:

[23:17:29.799 D] Goal: Picking Up Quest - The Assassin (http://wowhead.com/quest=9400) : From - Nazgrel (http://wowhead.com/npc=3230)

which is not avaible before Forward Base: Reaver's Fall (http://www.wowhead.com/quest=10124) (proof on wowhead in comments to quest "the assassin"). Bot simply open and close interaction window.