What's new
  • Visit Rebornbuddy
  • Visit Panda Profiles
  • Visit LLamamMagic
  • Visit Resources
  • Visit Downloads
  • Visit Portal
RebornBuddy Forums

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

HB ARCHIVES: Honorbuddy Profile Pack--DO NOT DELETE!

Having an issue with the quest "secret communication" in silithus, also happened with a couple other quests that have the same sort of format, I think the problem is that the quest giver says you can hand it in the minute you accept it, although you have no loot to hand in, hope i was clear enough, other than that good job! :D

EDIT: Sorry about the previous statement it completed the quest once i think and then it just kept trying to hand it in due to it being a repeatable quest.
 
Last edited:
So 1-12 human it just sits at the first quest giver. I had to restart my honorbuddy during a quest line. How long does it take to know where it is at?
 
Just wanted to post a thanks, not sure if this is the correct area but regardless, i level using the quest profiles from 1-90 while babysitting it in 3 days and 11 hours total with full heirlooms and as it was a monk I used the zen pilgrimage experience bonus every 10 levels or so.
Very impressed with the profile pack, keep up the good work!
 
BUG REPORT:

Did not see it listed in the proper section.

Where: LVL 9 Alliance warlock in Greymane manor outside of Gilneas city.

Quest: Exodus

He is supposed to go to coords 29.19 x 53.98 and board the carriage and leave the area.
Instead he goes to the top tower in manor at 42.83 x 21.97 and sits there until it gets disconnected.

This has happened to me on two other toons also.
 
BUG REPORT:

Did not see it listed in the proper section.

Where: LVL 9 Alliance warlock in Greymane manor outside of Gilneas city.

Quest: Exodus

He is supposed to go to coords 29.19 x 53.98 and board the carriage and leave the area.
Instead he goes to the top tower in manor at 42.83 x 21.97 and sits there until it gets disconnected.

This has happened to me on two other toons also.
same for me
 
Walking from Stormwind to Duskwood and flying back to Stormwind.


Hey Folks, the toon is doin' this everytime, no matter if I've just relogged and restarted the WoW-Client and HB.

I don't know what I'm doin' wrong and I hope you can help me with this problem.

Things I have done to solve the problem:

- Downloaded all meshes and put 'em into a new folder in the HB direction (set a link in HB to this direction)

- Cleared the HB-cache


Meanwhile the toon is an LvL 20 Nightelve Rogue trying to quest with the kickazz profil (1-58)

Here is my log:
Code:
Honorbuddy v2.5.11034.745 started.
Logging in...
T: 5247086724931792954 H: 686881861
Attaching to D3D11
Attached to WoW with ID 5764
New bot added!: ArchaeologyBuddy
New bot added!: BGBuddy
New bot added!: Dungeonbuddy
New bot added!: Gatherbuddy2
New bot added!: Grind Bot
New bot added!: Questing
New bot added!: Mixed Mode
New bot added!: Party Bot
New bot added!: [BETA] GrindBuddy
New bot added!: Combat Bot
New bot added!: ProfessionBuddy
New bot added!: Raid Bot
Honorbuddy v2.5.11034.745 started!
Character is a level 20 NightElf Rogue
Current zone is Elwynn Forest
EnabledPlugins:
RecentProfiles:
Please wait a few seconds while Honorbuddy initializes.
ItemForAura - Questhelper - Version 2.0 Loaded.
Installed plugins
    Anti Drown - Enabled
    DrinkPotions - Disabled
    Questhelper - ItemForAura - Enabled
    Refreshment Detection - Enabled
[Singular] Starting Singular v3.0.0.3502
[Singular] Installation: integrity verified for 3.0.0.3502 
[Singular] GCD check fix spell set to: Sap
[Singular] Determining talent spec. 
[Singular] Current spec is  Rogue Combat
[Singular] Your Level 20 Night Elf Combat Rogue Build is 
[Singular] ... running the Questing bot in Elwynn Forest 
[Singular] ... Zone: Eastern Kingdoms using my SOLO Behaviors 
[Singular] Initialization complete!
BuddyMonitor has started up successfully.
[BuddyMonitor] You have enabled BuddyMonitor but haven't entered your API key or your identifier yet! Open the configuration, set the values and restart HonorBuddy.
Initialization complete.
ItemForAura - Questhelper - Version 2.0 Loaded.
Changing current profile to [A - Quest] EK 12-58 [Kick] ($Rev: 3322 $)
Starting the bot!
Currently Using BotBase : Questing
[Singular] info: Pull Distance set to 100 yds by Questing, Plug-in, Profile, or User 
[MountHook-vUnknown(info)] Inserting hook
[Profile Message]: Compiling Redridge Quests
[MountHook-vUnknown(info)] Starting ground quest order.
[Profile Message]: Compiling Alliance Mount
[UseTransport-v1581(info)] Moving to wait location
[Singular] info: Pull Distance set to 1 yds by Questing, Plug-in, Profile, or User
Moving to Type: Fly, R: Use, Sturmwind, Elwynn
Moving to Type: Fly, R: Use, Sturmwind, Elwynn
Moving to Type: Fly, R: Use, Sturmwind, Elwynn
Moving to Type: Fly, R: Use, Sturmwind, Elwynn
Moving to Type: Fly, R: Use, Sturmwind, Elwynn
Moving to Type: Fly, R: Use, Sturmwind, Elwynn
Moving to Type: Fly, R: Use, Sturmwind, Elwynn
Moving to Type: Fly, R: Use, Sturmwind, Elwynn
Moving to Type: Fly, R: Use, Sturmwind, Elwynn
Moving to Type: Fly, R: Use, Sturmwind, Elwynn
Moving to Type: Fly, R: Use, Sturmwind, Elwynn
Moving to Type: Fly, R: Use, Sturmwind, Elwynn
TaxiMap is opened! Updating known nodes list.
Taking flight path to Sturmwind, Elwynn from Holzfällerlager des Osttals, Elwynn
[UseTransport-v1581(info)] Moving to wait location
[UseTransport-v1581(info)] Moving to wait location
Moving to Type: Hotspot, Loc: <-9941.796, -1703.43, 26.20845>
Moving to Type: Hotspot, Loc: <-9941.796, -1703.43, 26.20845>
Moving to Type: Hotspot, Loc: <-9941.796, -1703.43, 26.20845>
Moving to Type: Hotspot, Loc: <-9941.796, -1703.43, 26.20845>
Moving to Type: Hotspot, Loc: <-9941.796, -1703.43, 26.20845>
Moving to Type: Hotspot, Loc: <-9941.796, -1703.43, 26.20845>
Moving to Type: Hotspot, Loc: <-9941.796, -1703.43, 26.20845>
Moving to Type: Hotspot, Loc: <-9941.796, -1703.43, 26.20845>
Moving to Type: Hotspot, Loc: <-9941.796, -1703.43, 26.20845>
Moving to Type: Hotspot, Loc: <-9941.796, -1703.43, 26.20845>
Moving to Type: Hotspot, Loc: <-9941.796, -1703.43, 26.20845>
Moving to Type: Hotspot, Loc: <-9941.796, -1703.43, 26.20845>
Moving to Type: Hotspot, Loc: <-9941.796, -1703.43, 26.20845>
Moving to Type: Hotspot, Loc: <-9941.796, -1703.43, 26.20845>
Moving to Type: Hotspot, Loc: <-10050.72, -1367.473, 29.57896>
Moving to Type: Hotspot, Loc: <-10070.77, -1130.143, 29.37626>
[UseTransport-v1581(info)] Moving to wait location
Moving to Type: Fly, R: Use, Stormwind, Elwynn
Moving to Type: Fly, R: Use, Stormwind, Elwynn
Moving to Type: Fly, R: Use, Stormwind, Elwynn
Moving to Type: Fly, R: Use, Stormwind, Elwynn
Moving to Type: Fly, R: Use, Stormwind, Elwynn
Moving to Type: Fly, R: Use, Stormwind, Elwynn
Moving to Type: Fly, R: Use, Stormwind, Elwynn
Moving to Type: Fly, R: Use, Stormwind, Elwynn
Moving to Type: Fly, R: Use, Stormwind, Elwynn
Moving to Type: Fly, R: Use, Stormwind, Elwynn
Moving to Type: Fly, R: Use, Stormwind, Elwynn
Moving to Type: Fly, R: Use, Stormwind, Elwynn
TaxiMap is opened! Updating known nodes list.
Taking flight path to Stormwind, Elwynn from Darkshire, Duskwood
[UseTransport-v1581(info)] Moving to wait location
[UseTransport-v1581(info)] Moving to wait location
Moving to Type: Hotspot, Loc: <-10070.77, -1130.143, 29.37626>
Moving to Type: Hotspot, Loc: <-10070.77, -1130.143, 29.37626>
Ignoring flight master Dungar Longdrink since we can't fully navigate to it.
Moving to Type: Hotspot, Loc: <-10070.77, -1130.143, 29.37626>
[UseTransport-v1581(info)] Moving to wait location
Moving to Type: Hotspot, Loc: <-10070.77, -1130.143, 29.37626>
Moving to Type: Hotspot, Loc: <-10070.77, -1130.143, 29.37626>



This way it's always repeating itself.

Thanks for your help.
 
Last edited by a moderator:
someone fixed this before i got to it. it's been committed

I found a small bug in the "[A - Quest] 85-86 The Jade Forest [Kick].xml" profile:


Code:
Line 2520:         <If Condition="HasQuest(32018) &amp;&amp; IsQuestCompleted(32019)">

Should be:

Code:
Line 2520:         <If Condition="HasQuest(32019) &amp;&amp; IsQuestCompleted(32019)">

The quest id is 32019
 
After finishing a profile (lets say 80-82), can i put which one should be next so i can chain them up to lvl 90?
it will auto load the next profile, but you can load whatever you want. they all load from capitol city (sw / org) if 0 quests have been completed for that profile
the quest profiles stuck too often for me (outlands and northrend) outlands worked when i did some help but northrend doesnt do anything :/

i start bot then when it doesnt do i'd stop and i could click again on stop button and again and again without task manager i'd never close honorbuddy again ... some1 know how to fix this?
need a log
I NEED HELP ASAP!

Today I did for the first time EVER update Kick's Profile through the SVN, but now there is NOTHING in the folder anymore, only 1 thing is in there which is called: README
we changed the svn to assembla. use the new link
So 1-12 human it just sits at the first quest giver. I had to restart my honorbuddy during a quest line. How long does it take to know where it is at?
need a log
Just wanted to post a thanks, not sure if this is the correct area but regardless, i level using the quest profiles from 1-90 while babysitting it in 3 days and 11 hours total with full heirlooms and as it was a monk I used the zen pilgrimage experience bonus every 10 levels or so.
Very impressed with the profile pack, keep up the good work!
thx
 
The DK quests are all totally broken. There isn't a single quest that works properly and I had to do them all by hand.
i did them on 5 toons a few weeks ago and fixed a couple of issues ... they work perfect now.

please attach a log
 
Hey why is that every time it picks up quests or take flight paths it'll dismount to pick them up?

Mounts to quest giver
> seems like it clicks on the quest giver twice to ensure that it has picked it up which is good, but the second time it usually dismounts before picking it up?
It looks really bot-ish~

Fresh install.
 
Is it possible to somehow set it to be afk on 80-85 and 85-90? like in bc/lk ? as the profiles are seprate depending on the location, is it possible to combine them so it can be fully afk?
 
Is it possible to somehow set it to be afk on 80-85 and 85-90? like in bc/lk ? as the profiles are seprate depending on the location, is it possible to combine them so it can be fully afk?
they are pretty much /afk. they auto load each other
 
Hey why is that every time it picks up quests or take flight paths it'll dismount to pick them up?

Mounts to quest giver
> seems like it clicks on the quest giver twice to ensure that it has picked it up which is good, but the second time it usually dismounts before picking it up?
It looks really bot-ish~

Fresh install.
working as intended. this was a group dev decision
 
Hi, C1L,

There is no easy way. You would need to edit the profiles, and add a Nav="Fly" attribute to each RunTo/MoveTo element.

cheers,
chinajade

change all:
<MoveTo
<MoveTo Nav="Fly"

make sure to add a space after the "Fly"
save

now this would work if i had moveto's everywhere... but i don't. So that's not going to work very well. You could possibly make a flying plugin that flew to all of your coords, but then you might get stuck flying above a cave that you have to walk into or something
 
Last edited:
Thanks for the quick reply moaddib.

I've stopped the honorbuddy and started again several times and still doing the question chain atm i am level 45 and still in feralas.
you always need to attach a log. Please do not come in here and say 'my car won't start, fix it' without letting me run a diagnostic on it (ie: give me the log from your bot!)

cheers
 
Quest : Needs a little lubrication (H)

Problem : endlessly killed by raging ancients (sama goes for any quest around this big npc or any quest that needs to pass by). The bot decided to aggro nearby lesser mob and attacted raging ancient as well.
 
Quest : Needs a little lubrication (H)

Problem : endlessly killed by raging ancients (sama goes for any quest around this big npc or any quest that needs to pass by). The bot decided to aggro nearby lesser mob and attacted raging ancient as well.

yeah i need to send that mesh issue in.
 
MountHook-vUnknown(info)] Inserting hook
[Profile Message]: Compiling Eastern Plaguelands Quests
[Profile Message]: Compiling Train 100 Speed Mount Function

pls help me don`t working.. lv up..
 
Gets stuck at NPC Rally Zapnabber @outland/Blade's Edge Mountains. This happen before when I leveled my Warlock a couple weeks back.
 

Attachments

hei man, got a prob with ur jade forest alliance quest profile, and ONLY the 85-86 Profile. Dont need to post a logfile i think, cause all others are running, and on this profile, it writes for hours, loading tiles, and the toon is running, but stopps every 2-5steps, pause, running 2-5steps.... tested the other profiles, no problem, doing like it should....

edith: given log also, first is the profile bugging, and 2ec is the flypoint profile...hope u find something....
 

Attachments

Last edited:
Back
Top