HB ARCHIVES: GarrisonBuddy--DO NOT DELETE

[chinajade]

stuck in infinite loop trying to do barn quest............cant we just skip the quest and pick up the Deadly iron trap on ground inside barn? Ive never done the quests on 15+ toons and now its seeming like it forcing me to waste work order slots on doing them quests. Even tried disabling barn in profile and still went out and trapped and wanted to do quest.

Edit: I should note I manually interacted with it cause it kept killing the elk......trap is in my bag but my barn is now filled with work orders so it wont allow me to process the work order to complete the quest. Would just like to completely disable the barn quests if possible.

View attachment 177052

Hi, Getmunch, and thanks for the log.

Against this issue, we've opened:

HB-2329: GarrisonBuddy: Problems executing "Breaking into the Trap Game"​

cheers,
chinajade


[size=-2]Ref: [post=1937821]Getmunch's problem report w/log[/post][/size]

 

[chinajade]

All of my toons are stopping at the stairs exiting the mines after finishing mining. If I stop restart the bot, it will continue fine, but not without intervention.

One character log attached.

Hi, Chasemay, and thanks for the log.

Against this issue we've opened:

HB-2330: GarrisonBuddy: Stopping on stairs after mining​

If you could provide a couple of logs from your other toons that are doing the same thing, we can add them to the report. This may allow us to see a common pattern. A brief look through this log didn't yield anything unusual, other than you had no mining work orders to place, so it was trying to go directly to the herb garden.

cheers,
chinajade


[size=-2]Ref: [post=1938010]Chasemay's problem report w/log[/post][/size]

 

[chinajade]

Strangest thing happened this morning.
One of my toons did half of mine, ran to war mill to repair and place work order, then did other half of mine. Attached log below 176088.

My other toons either did the Warmill work order during while doing the scrap meltdown quest (which makes sense) or after the mine (which makes less sense).

Secondly, my toons still tried to do missions though the setting was disabled (both in the GarrisonBuddySettings.xml and the bot UI). I fixed by stopping as they were going to do the missions and restarting the bot; didn't happen on second pass. Attached logs below 175940 & 157884.

Finally, I note that with some of the work orders (at all buildings), only partial orders are being placed. This is associated with huge fps drops placing the work orders. This only happens on occassion, but you can see even in the log attached that when I stopped/started the bot to prevent missions from being done there were several work orders that were only partially placed.

*** I feel compelled to give props to the HB team every post here, because this products is top notch! ***

Hi, ArmyDr, and many thanks for those logs.

For the mailing issue, the latest drop has a new configurable that determines at how many empty bag slots a mail run should be conducted. Are you certain this new setting is set acording to your expectations? Also, from that log, the toon has no mail recipient set, which my be contributing to the problem:

[16:36:43.414 D] Cannot mail because there is no mail recipient​

For the second issue, we've opened:

HB-2333: GarrisonBuddy: Dispatching Missions, even though disabled​

cheers,
chinajade


[size=-2]Ref: [post=1937823]ArmyDr's problem report w/logs[/post][/size]

 

[lobster]

Salvage Yard Prequest

Hey people, love the bot! Thank you thank you thank you. A few days ago, after completing missions and salvaging items, the bot shows "[Garrisonbuddy] Picking up SalvageYard pre-quest (37086)." The quest is not available, however, as it was already completed before I started using the bot. I did see something in this thread about not picking up the salvage yard quest being fixed at some point recently, but that doesn't seem to be the problem here as the quest isn't available to be picked up in the first place. Any ideas? <3

 

[chinajade]

Hey people, love the bot! Thank you thank you thank you. A few days ago, after completing missions and salvaging items, the bot shows "[Garrisonbuddy] Picking up SalvageYard pre-quest (37086)." The quest is not available, however, as it was already completed before I started using the bot. I did see something in this thread about not picking up the salvage yard quest being fixed at some point recently, but that doesn't seem to be the problem here as the quest isn't available to be picked up in the first place. Any ideas? <3

Hi, Lobster, and thanks for the log.

Problems like you describe are usually caused by a corrupted cache. Please follow the instructions in this article for cleaning it:

Honorbuddy:HelpDesk:Cache corruption problems​

If the problem persists, please let us know and toss a fresh log.

cheers,
chinajade


[size=-2]Ref: [post=1938902]Lobster's original post w/log[/post][/size]

 

[sacoplastico]

It is very likely that this has already been asked but...

When the Mission Planning Strategy is set to "By Experience" the bot only submits missions until all non-lvl100 Elites are on a mission. Is there a way (or is it planned, or could you please plan it, or is it too messy) to have the bot submit missions for the remaining followers following a second Strategy?

I believe (but I have not tested) the same principle applies if the Strategy is "By Resources" or "By Gold" - only missions with gold/resources rewards are submitted.

 

[chinajade]

It is very likely that this has already been asked but...

When the Mission Planning Strategy is set to "By Experience" the bot only submits missions until all non-lvl100 Elites are on a mission. Is there a way (or is it planned, or could you please plan it, or is it too messy) to have the bot submit missions for the remaining followers following a second Strategy?

I believe (but I have not tested) the same principle applies if the Strategy is "By Resources" or "By Gold" - only missions with gold/resources rewards are submitted.

Hi, Sacoplastico,

Excellent suggestion! To see what Apoc has to say, we've opened:

HB-2348: GarrisonBuddy: Allowing for a Secondary Mission Planning Strategy?​

cheers,
chinajade

 

[chasemay]

I have noticed this bug on several toons (I use the same building setup often obviously )

As the bot tries to do the prequests to open the Gem Boutique, it tries to turn in the final part of the building opening quest to Y'rogg, the scribes quarters work order npc, instead of Elrondir Surrion at the Gem Boutique. The bot will try continuously to turn in at Y'rogg, but he obviously never accepts

Log attached.

 

[chasemay]

Hi, Chasemay, and thanks for the log.

Against this issue we've opened:

HB-2330: GarrisonBuddy: Stopping on stairs after mining​

If you could provide a couple of logs from your other toons that are doing the same thing, we can add them to the report. This may allow us to see a common pattern. A brief look through this log didn't yield anything unusual, other than you had no mining work orders to place, so it was trying to go directly to the herb garden.

cheers,
chinajade


[SIZE=-2]Ref: [post=1938010]Chasemay's problem report w/log[/post][/SIZE]

Thanks for looking into this

Two more examples from different toons attached.

 

[zhangxu92]

Suggestion: Could you make an option(tick box) at main config UI that only harvest mines and herbs and collect cache, so no other settings required when logging onto alts just to farm those mats. thanks

 

[tataros]

I have noticed this bug on several toons (I use the same building setup often obviously )

As the bot tries to do the prequests to open the Gem Boutique, it tries to turn in the final part of the building opening quest to Y'rogg, the scribes quarters work order npc, instead of Elrondir Surrion at the Gem Boutique. The bot will try continuously to turn in at Y'rogg, but he obviously never accepts

Log attached.

I also have the same problem with JC pre-quest. I turned it in manually but the bot still tried to complete it. Even if I removed the JC work orders from options, it still goes and place work orders..(while I want to save the ores for other uses..I have jc only for the daily..)

 

[tataros]

Also on my warrior today, the bot did not opened the salvage crates and he started 2 missions while I have disabled missions

 

[Apoc]

I have noticed this bug on several toons (I use the same building setup often obviously )

As the bot tries to do the prequests to open the Gem Boutique, it tries to turn in the final part of the building opening quest to Y'rogg, the scribes quarters work order npc, instead of Elrondir Surrion at the Gem Boutique. The bot will try continuously to turn in at Y'rogg, but he obviously never accepts

Log attached.

Fixed this! Thanks for the heads up. Apparently I changed my comments in the code, but never did change the NPC ID. Sorry about that!

I also have the same problem with JC pre-quest. I turned it in manually but the bot still tried to complete it. Even if I removed the JC work orders from options, it still goes and place work orders..(while I want to save the ores for other uses..I have jc only for the daily..)

This is just an issue with WoW in general. Quest completions aren't tracked properly in the client, so if you manually complete a quest that the bot doesn't think was completed, you'll have to relog your character so that WoW updates the completion list.

 

[EternalStudent]

Only tried this once on two toons, but on my level 3 town with an Engineering building in the separate small slot (west most if entrance is south) the bot was stuck trying to walk to my bunker in the plot just NW of this building. It was trying to walk through the walls for a while then I stopped it. Attaching log. View attachment 6072 2015-04-28 08.18.txt

And second the multiple mission goals request (another reason I came here).

============================
(Edit)

Today it looked like it was going to do the same thing, but it seemed to finally go far enough left to get out of the building. Sorry for the false alarm, though in some situations it could be faster at getting around (not sure if it would have ever gotten free that first time).

And thanks for all your hard work!

 

[Animatrix667]

bot stuck, sometimes wow crash too

Heyo first off all thanks for this great botbase. At the beginning of WoD i took a liddle break of botting after is just saw paid botbases for garrison and minerals and herbs was ridiculous cheep.

Since a few days i run Garrisonbuddy on 8 toons. Most time it does a very good job but i noticed that the bot often stuck when he want to calculate the missions and sometimes WOW crashes.(CPU usage gains to 20% from 6-7%)

And now to my Question: Are there any Settings to solve this Problem or make this work process smarter so that my pc/wowprocess can handle it?

First toon who failed
View attachment 177312
View attachment 177314
View attachment 177316

Second toon who failed
View attachment 8472 2015-04-28 18.27.txt
View attachment 8972 2015-04-28 18.44.txt

Sorry for any grammtical misstakes i`m from Austria and my english isn`t perfekt. . . I tryed to do my best.

 

[razer]

For some reason no matter what character I use this on it does not do any of the pre-quests now I leveled all my guys from dungeons did the first part just to get the garrison but did not do any of the quests they are all level 100.

 

[britheguy]

The botbase doesn't even start anymore.

I would click start and would just get -

"Honorbuddy Startup Complete
Starting the bot!
Currently Using BotBase : Garrisonbuddy
Current zone is Town Hall (http://wowhead.com/zone=7078)" (I don't even get a log)

Then nothing would happen and the "start" button wouldn't even change to a "stop" button.

 

[paulmuadip]

Heyo first off all thanks for this great botbase. At the beginning of WoD i took a liddle break of botting after is just saw paid botbases for garrison and minerals and herbs was ridiculous cheep.

Since a few days i run Garrisonbuddy on 8 toons. Most time it does a very good job but i noticed that the bot often stuck when he want to calculate the missions and sometimes WOW crashes.(CPU usage gains to 20% from 6-7%)

And now to my Question: Are there any Settings to solve this Problem or make this work process smarter so that my pc/wowprocess can handle it?

First toon who failed
View attachment 177312
View attachment 177314
View attachment 177316

Second toon who failed
View attachment 177317
View attachment 177318

Sorry for any grammtical misstakes i`m from Austria and my english isn`t perfekt. . . I tryed to do my best.

Du hast einige GreyMagic Fehler in deinen Logs.

bei diesen fehlern handelt es sich nämlich nicht um fehler die von der Botbase verursacht werden

Der erste Weg diese zu beheben wäre PC neu zu starten -
wenn es weiterhin auftritt würde ich es mal mit einer sauberen neuinstallation von HB versuchen...
wenn das auch nicht hilft würde ich mal den Buddywizard ausführen und schauen ob du die aktuellsten versionen oben hast was du natürlich auch vor der neuinstallation machen kannst...

grüße

 

[paulmuadip]

The botbase doesn't even start anymore.

I would click start and would just get -

"Honorbuddy Startup Complete
Starting the bot!
Currently Using BotBase : Garrisonbuddy
Current zone is Town Hall (http://wowhead.com/zone=7078)" (I don't even get a log)

Then nothing would happen and the "start" button wouldn't even change to a "stop" button.

try to restart honorbuddy - i also had the issue today but it was my fault...

restart helped me...

regards...

 

[paulmuadip]

For some reason no matter what character I use this on it does not do any of the pre-quests now I leveled all my guys from dungeons did the first part just to get the garrison but did not do any of the quests they are all level 100.

not sure what you mean...

this botbase dont do any questing for you

Its picking up work orders
starting work orders
gathering herbs/ores - under the circumstance you are not in germany
buying stuff if you have to much garri ressources
and some other things...