What's new
By:
  • Visit Rebornbuddy
  • Visit Panda Profiles
  • Visit LLamamMagic
  • Visit Resources
  • Visit Downloads
  • Visit Portal
RebornBuddy Forums

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

HB ARCHIVES: FishingBuddy--DO NOT DELETE

Hi, Flnkr, and many thanks for those logs!

Flnkr said:
On a separate note, is there a way to change which fishing pole the bot uses?? I was using Pandaren Fishing Pole, then bought the Dragon Fishing Pole. While I have both in my bags, I put the former in my tackle box, equipped the latter, and stored a non-fishing bag. Occasionally, the bot would seek to equip the pole in my tackle box, and since my wpn couldn't go there, would get caught in a loop.
Click to expand...

We've opened HB-713 ("AutoAngler2: Equipping lesser fishing poles, and trying to put weapon in "fishing gear only" bag") against this issue.


Flnkr said:
Ive attached a couple of logs as my Troll had a similar issue BEFORE I obtained the Anglers Fishing Raft. In my case HB would stop working; my recollection is this occurred when something interrupted my fishing - combat or something - and I had no WW aura.
...
As I typed this I had the WW aura issue; the raft would not engage properly, and HB stopped working. Log attached. I wasn't sure which earlier log had the correct data, but I can provide a cpl if needed.
...
Added second log, as it happened again - HB stopped - while jumping with access to raft. (FYI - I have had problems with the raft without using HB also)
Click to expand...
Flnkr said:
I continue to have problems with AA2 and the Angler Raft / Water Walking. I have attached logs. Repeatedly, whenever the profile attempts to land in water and use the raft, HB stops..
Click to expand...

Thanks much for these logs. There are a couple of things that may be causing the problem. The most obvious is the Rarekiller plugin appears to be interfering with AutoAngler2:
[13:04:17.617 D] Flushing timed movement. Direction: JumpAscend
[13:04:18.081 N] Rarekiller: Slowfall failed
[13:04:18.239 N] Rarekiller: Don't fall any more
[13:04:57.978 N] Mounting: Sandstone Drake
[13:05:06.179 D] Changed POI to: Type: Harvest
[13:05:09.800 D] Stop and dismount... Reason: Fishing
[13:05:10.557 D] Flushing timed movement. Direction: JumpAscend
[13:05:11.221 N] Rarekiller: Slowfall failed
[13:05:11.362 N] Rarekiller: Don't fall any more
[13:05:11.411 D] Garbage collected 2 nav tiles
[13:05:11.411 D] Activity: Loading Tiles
...<repeats>...​

The second thing, it appears that your Combat Routine has some issues that may also be interfering with AutoAngler2:
[13:37:31.514 N] Activate Haromm's Talisman on Cooldown
[13:37:31.547 N] Activate Ticking Ebon Detonator on Cooldown
[13:37:31.572 N] Use: Gloves Buff Activated on Cooldown
[13:37:31.581 N] Burst Mode Activated On Cooldown
[13:37:31.677 N] Activate Haromm's Talisman on Cooldown
[13:37:31.703 N] Activate Ticking Ebon Detonator on Cooldown
[13:37:31.729 N] Use: Gloves Buff Activated on Cooldown
[13:37:31.847 N] Activate Haromm's Talisman on Cooldown
[13:37:31.875 N] Activate Ticking Ebon Detonator on Cooldown
[13:37:31.987 N] Activate Haromm's Talisman on Cooldown
[13:37:32.023 N] Activate Ticking Ebon Detonator on Cooldown
...<repeats>...​

I'm going to ask that you go back to the Singular Combat Routine, and disable all non-Honorbuddy-shipped plugins while running AutoAngler2, and see if that clears your problem up. Thanks!

cheers,
chinajade


[size=-2]Ref: [post=1480854]Flnkr's original post 1 w/logs[/post][/size]
[size=-2]Ref: [post=1485779]Flnkr's original post 2 w/logs[/post][/size]
 
Last edited:
Thanks Chinajade - I will do exactly that, and follow up with a reply letting you know if it is resolved. Cheers.
 
hello

im trying to fish from Large Pool (fishing of the day event)

i've added the large pool entry, name. but it just says


[10:36:20.544 N] AutoAngler[2.116]: Blacklisting Large Swarm of Panicked Paddlefish for 1.00:00:00 Reason: Found no landing spots

TRIED with both WATER WALKING elixir and none. (near the pool there are Fishing Rafts that you should stand on them if you want to fish the large pool without WW potion). both no success.

added log in attachment.

thanks
 

Attachments

hello, got another problem is when some1 starting to fight me, char is just running away untill it gets out of the combat.. and goes back to the same spot and loop. :/
 
deazed said:
hello, got another problem is when some1 starting to fight me, char is just running away untill it gets out of the combat.. and goes back to the same spot and loop. :/
Click to expand...
Hi, Deazed,

As always, we will be unable to assist you, if you don't attach the full log that captured the event. Please see "Reporting Problems with AutoAngler" in the first post.

cheers,
chinajade
 
deazed said:
im trying to fish from Large Pool (fishing of the day event)
i've added the large pool entry, name. but it just says

[10:36:20.544 N] AutoAngler[2.116]: Blacklisting Large Swarm of Panicked Paddlefish for 1.00:00:00 Reason: Found no landing spots

TRIED with both WATER WALKING elixir and none. (near the pool there are Fishing Rafts that you should stand on them if you want to fish the large pool without WW potion). both no success.
Click to expand...

Hi, Deazed,

We chatted with Highvoltz about this issue. At this time, AutoAngler does not support the "Fish of the Day" events given by Ben of the Booming Voice.

We have added this information to the FAQ. We'v also opened HB-756 ("AutoAngler: Any way to support fishing for "Fish of the Day" events?") to see if anything can be done about this situation. (No promises.)

cheers,
chinajade


[size=-2]Ref: [post=1502964]Deazed's problem report w/log[/post][/size]
 
Last edited:

Attachments

hello

attached log it says
AutoAngler[2.116]: Blacklisting Large Swarm of Migrated Reef Octopus for 00:10:00 Reason: Spend too much time at pool


i finally made the bot to fish from Large pool but after 10min it just blacklisted it.

how do I remove the blacklist now? :/

thanks
 

Attachments

Last edited:
lama said:
Hello, not sure if this is a bot issue or a profile issue, but my bot doesn't move to the hotspots in the profile. It does move to pools and fish if I move near one. And yes poolfishing is set to true, if it is set to false it fishes in place.

The profile I'm using is: http://www.thebuddyforum.com/honorb...n-fly-stranglethorn-fishing-extravaganza.html
Click to expand...

Hi, Lama, and many thanks for the log, and the link to the profile!

This question is answered in our FAQ in the first post. It should walk you through resolving the issue.

cheers,
chinajade


[size=-2]Ref: [post=1504786]Lama's original post w/log[/post][/size]
 
deazed said:
AutoAngler[2.116]: Blacklisting Large Swarm of Migrated Reef Octopus for 00:10:00 Reason: Spend too much time at pool
i finally made the bot to fish from Large pool but after 10min it just blacklisted it.
how do I remove the blacklist now? :/
thanks
Click to expand...

Hi, Deazed, and thanks for the log.

<chuckles> Still trying to get "Fish of the Day" to work, eh?

To remove an automatically-generated blacklist like this, you're must close Honorbuddy and relaunch it.

cheers,
chinajade


[EDITED 7-Jun-2014 by chinajade]: The .739 release of Honorbuddy should now allow fishing from the large rafts, and correctly water-walking when doing "Fish of the Day". As such, we've removed the FAQ that said "Fish of the Day" is not supported.
 
Last edited:
Such as nice bot ... i just got suspended right after i did the fishing bot ... , i've been using honorbuddy bot for like months now and i never got banned for using it , but right after i used this i got suspended for 3 days and final warning
 
chinajade said:
Hi, Lama, and many thanks for the log, and the link to the profile!

This question is answered in our FAQ in the first post. It should walk you through resolving the issue.

cheers,
chinajade


[size=-2]Ref: [post=1504786]Lama's original post w/log[/post][/size]
Click to expand...

Hello, as my first post says the poolfishing is enabled, however I still have the problem.
 
When fishing with my rogue, because I have two daggers the same with the same ID for MH and OH, only the MH is equipped how can I fix this?
 
tjrulz16 said:
Profile doesnt work... soon as i start it up it does nothing
Click to expand...
tjrulz16 said:
I cant seem to get the Darkmoon fair to work
Click to expand...

Hi, Tjrulz16,

This is a bot, not a profile. This article should help you understand the differences.

As to your issues...
They make no sense in the context of AutoAngler2. We believe you posted in the wrong thread. If you need to report an issue here, please see the section titled "Reporting Problems with AutoAngler" in the first post.

cheers,
chinajade
 
mrgoozoo said:
Such as nice bot ... i just got suspended right after i did the fishing bot ... , i've been using honorbuddy bot for like months now and i never got banned for using it , but right after i used this i got suspended for 3 days and final warning
Click to expand...

Hi, Mrgoozoo,

You did not get suspended for using AutoAngler2. Unless it is something requiring immediate redress—such as abusing an exploit—then Bliz bundles their actions for 4-6 weeks, and actions all at the same time.

What you were doing in the past 72 hours has almost no bearing on a suspension or ban. It was activities from more than a week ago. If you wish to fill out a ban report, please do so in our Ban forum.

cheers,
chinajade
 
lama said:
chinajade said:
Hi, Lama, and many thanks for the log, and the link to the profile!

This question is answered in our FAQ in the first post. It should walk you through resolving the issue.

cheers,
chinajade


[size=-2]Ref: [post=1504786]Lama's original post w/log[/post][/size]
Click to expand...
Hello, as my first post says the poolfishing is enabled, however I still have the problem.
Click to expand...

Hi again, Lama,

Apologies for mis-reading your post the first time around.

We believe the problem lies with your profile—it uses <SubProfile> elements which haven't been supported in Honorbuddy for quite a while. You might try removing these from the profile, and see if it starts working for you. (Keep the Hotspots and Hotspot intact from the <SubProfile> element. Discard everything else—including the SubProfile element itself.)

Please let us know if this resolves the problem.

cheers,
chinajade
 
Last edited:
You must log in or register to reply here.
Back
Top