[PAID] GoldBoss - Unlimited BotManager - Full Bot Automation! [known as GarrisonBoss]

[@alisha]

Do you need a log and setting sile of the last toon?

I have HBrelog setup with only first char. then in Tasks ,wait for 300 minutes, then stop HBRelog profile.But i finish all tasks before the 300 minutes.Last char. logs out,but HBrelog automatically logs back in, because i guess it thinks it's a disconnect.

Yes, log and settings for last toon.
And you should use option i mention for HBRelog - stop HBRelog profile, after task for wait X minutes, as it will start execution right after login (in HBRelog), if you do not have stop profile - it can do it endless.

p.s. make sure you are using last version of my HBRelog edition which is 1.2.2, link in GoldBoss GUI.

 

[Mike Hunt]

Yes, log and settings for last toon.
And you should use option i mention for HBRelog - stop HBRelog profile, after task for wait X minutes, as it will start execution right after login (in HBRelog), if you do not have stop profile - it can do it endless.

p.s. make sure you are using last version of my HBRelog edition which is 1.2.2, link in GoldBoss GUI.

1.2.2 is out? , ok, i was using 1.2.1. I'll try it with new HBrelog tomorrow and report back.

 

[Mike Hunt]

I have a question about HBRelog. I used to have the other version (not yours),and the settings are saved somewhere, do i need to delete those settings and start from scratch with your version? Because i just downloaded your new version, 1.2.2,but when i run it, all my tasks are there,and when i click on log button, it shows v 1.1.4.

 

[@alisha]

I have a question about HBRelog. I used to have the other version (not yours),and the settings are saved somewhere, do i need to delete those settings and start from scratch with your version? Because i just downloaded your new version, 1.2.2,but when i run it, all my tasks are there,and when i click on log button, it shows v 1.1.4.

Better to redone it yes, just in case. It saving settings as i remember in \AppData\Roaming\HighVoltz\HBRelog\ of current user.

 

[Zicoth]

Found kinky bug on one char today, bot running to Nat Pegle all time, fishing work orders r disabled.

 

[Xermont]

Found kinky bug on one char today, bot running to Nat Pegle all time, fishing work orders r disabled.

Have the same problem

 

[@alisha]

Found kinky bug on one char today, bot running to Nat Pegle all time

This is HB exception

[19:31:29.880 D] Exception was thrown in BotBase.Root.Tick
[19:31:29.881 D] Buddy.Coroutines.CoroutineUnhandledException: Exception was thrown by coroutine ---> System.Exception: Запрос ReadProcessMemory или WriteProcessMemory был выполнен только частично, at addr: 000000F4, Size: 4
at GreyMagic.ExternalProcessMemory.ReadByteBuffer(IntPtr addr, Void* buffer, Int32 count)
at GreyMagic.MemoryBase.Read[T](IntPtr addr)
at Styx.WoWInternals.WoWObjects.WoWObject.get_QuestGiverStatus()

I will report it to HB Team and request fix for it.

But result of bug not for 100% caused by it, it looks like it have some non usual TurnIn requirements, i will need to investigate how to better handle it.

fishing work orders r disabled.

It's not from Fishing, it's QuestHelper trying to turn in nearby quests.

By now, to avoid it, you can disable option to turn in nearby completed quests in GUI: Survival Helper -> Turn In Nearby Completed Quests

(This options was recently added to GUI).

 

[TimeSaverZealot]

I'm having a very bad start of the Goldboss Engine on my first day of using it.

On a character that's set to use the Garrisonbuddy base for 30 minutes or less, using the Goldboss Engine, first of all, the character flies off tho Ashran, without picking up the resources or orders or using the mission table; secondly, the character tries to swim across the ocean towards the west; I don't know for what. And that's instead of using the Garrison Hearthstone, for example. So I used it myself. So it crosses the ocean again and goes to Nagrand, and fights near Elites, instead of running away from them. And it keeps doing this, fighting against mobs near elites, until one or two elites are fighting it with about 5 or 7 other mobs; and again, instead of running away, it keeps fighting, until the character's gear became all red and a couple yellow; that's probably gonna be a 100g repair bill. Perhaps the combat is not Goldboss Engine's problem, but Singular's problem, but it is probably Goldboss's problem that the character is swimming across oceans and passing through zones with elites, instead of simply using the fly master to go to wherever it is trying to go.

And the icing of the cake is: the character now can't even find its own corpse! This hasn't happened before in front of me. It is just moving back and forth, back and forth, in one spot, instead of moving in the direction of the red arrow.

Please find the log(s) attached.

 

[nuhll]

Its just because the first time you load the botbase he try to get you some followers.

You can disable that under followers (right bottom)

For me it worked nearly 100% afk, but you should help the bot to reach its targets.

 

[TimeSaverZealot]

Its just because the first time you load the botbase he try to get you some followers.

You can disable that under followers (right bottom)

For me it worked nearly 100% afk, but you should help the bot to reach its targets.

Thank you for clarifying that. Yes, I noticed that it went to Ashran to recruit a Pandaren. Are they really good followers, the ones it's trying to recruit? What if I'm already at 20/20? Does it let go the worst uncommon (green) follower, for example?

And how do I know its target? I'm happy to supervise it until it recruits all those followers (if they're worth it), but how do I know where it wants to go?

EDIT: Ok, just saw one of the followers, it was already level 100, and green, but when I recruited it, it became epic. These followers are definitely worth it.

 

[@alisha]

I'm having a very bad start of the Goldboss Engine on my first day of using it.

On a character that's set to use the Garrisonbuddy base for 30 minutes or less, using the Goldboss Engine, first of all, the character flies off tho Ashran, without picking up the resources or orders or using the mission table; secondly, the character tries to swim across the ocean towards the west; I don't know for what. And that's instead of using the Garrison Hearthstone, for example. So I used it myself. So it crosses the ocean again and goes to Nagrand, and fights near Elites, instead of running away from them. And it keeps doing this, fighting against mobs near elites, until one or two elites are fighting it with about 5 or 7 other mobs; and again, instead of running away, it keeps fighting, until the character's gear became all red and a couple yellow; that's probably gonna be a 100g repair bill. Perhaps the combat is not Goldboss Engine's problem, but Singular's problem, but it is probably Goldboss's problem that the character is swimming across oceans and passing through zones with elites, instead of simply using the fly master to go to wherever it is trying to go.

And the icing of the cake is: the character now can't even find its own corpse! This hasn't happened before in front of me. It is just moving back and forth, back and forth, in one spot, instead of moving in the direction of the red arrow.

Please find the log(s) attached.

1) if you own GoldBoss All in One you do not need to run GarrisonBuddy
2) All tasks in BotManager will be executes after All works in Garrison, Professions & other modules you own
3) Why Bot is doing something you can find out checking log file. For example: for new toon it will try to do basic stuff like Recruit followers for Garrison.
Which exactly happen in your case:

[12:32:35.360 N] [GoldBoss Engine 35.360]: Followers Recruitment: Do not have Follower <Fen Tao>, Start Recruiting Process

Then

[12:39:16.782 N] [Alisha Engine 16.782]: Moving[Can fly] to <Goldmane the Skinner> at <2036.178, 6999.708, 51.06079>@11442.8, Me at <5302.587, -3966.936, 18.76852>

Followers will be recruited at recommended by wowhead level for it's quest. So if you toon >= this level.

If you do not want to do it -> Open GUI and setup options as you want, including Followers work.

4) It will use taxi if it available for toon, if not - it will use mount, or will fly if toon have flying.

5) Be aware if you using wow addons on botting account, it can prevent normal bot work (i.e. interacting with objects), so if you have any issue, first of all try to disable all wow addons.

It is just moving back and forth, back and forth, in one spot, instead of moving in the direction of the red arrow.

This meaning stuck issue, which can happen in open world, if toon died in some weird spot.

 

[nuhll]

You see it. If you see him swimming to ashran then just stop and fly there.

Or you could simple check where the followers are. But it should be working without to much manual doin. I just ahd the bug that the first follower could not be recruited, but i thik this was wow bug.

I dont know if they are worth it, but the bot will disable followers if have too many, automatic, so why not.

 

[TimeSaverZealot]

Thank you very much for the clarifications. This will help me understand how the tool works, and where to find information myself, like its destinations and so on.

Alisha, if I don't need to pick GarrisonBuddy, then how can I put Garrison work as Task #1, for example, in Goldboss?

 

[Mike Hunt]

Yes, log and settings for last toon.
And you should use option i mention for HBRelog - stop HBRelog profile, after task for wait X minutes, as it will start execution right after login (in HBRelog), if you do not have stop profile - it can do it endless.

p.s. make sure you are using last version of my HBRelog edition which is 1.2.2, link in GoldBoss GUI.

Ok here the files you requested. HBrelog restarts tasks from begining after last toon is done.
I deleted the old setting file from HBRelog and started fresh.
View attachment GarrisonBoss.config.xmlView attachment 10112 2016-05-14 12.24.txt

Edit: Also My inscriptor does not start inscription work orders.
View attachment 12084 2016-05-14 10.10.txt

 

[chkaze]

View attachment 35480 2016-05-14 21.45.txt

Suddenly started getting this error. Fresh installed HB without any plugins loaded but no luck.

 

[chkaze]

and its working again today. No clue what caused the error.

 

[@alisha]

Ok here the files you requested. HBrelog restarts tasks from begining after last toon is done.
I deleted the old setting file from HBRelog and started fresh.
View attachment 202282View attachment 202283

Edit: Also My inscriptor does not start inscription work orders.
View attachment 202284

Have you made as i suggested: HBRelog stop profile task? I can assume you are not.

GoldBoss logged off as i can see, according settings you have in GUI.

Also you may want to see logs from HBRelog, and not HB itself int case it's connected to HBRelog.

[19:40:39.974 N] [GoldBoss Engine 39.974]: Stopped
[19:40:40.036 N] [GoldBoss Engine 40.036]: Calling HonorBuddy Stop
[19:40:40.037 Q] Bot stopping! Reason: None Given

For Inscription, make sure you have enabled WorkOrders in Garrison tab + Have mats

For profession, if you in some case mean it:

[17:11:13.406 N] [GoldBoss Engine 13.406]: Starting check for <Inscription>
[17:11:13.412 N] [GoldBoss Engine 13.412]: Do not have Profession Item <Virtuoso Inking Set> in Bag.

 

[@alisha]

View attachment 202285

Suddenly started getting this error. Fresh installed HB without any plugins loaded but no luck.

Attach full log file if you want to get help.

Ref: [post=378165][Guide] How to attach your log[/post]​

p.s. never post parts of logs.

 

[TimeSaverZealot]

I just bought Goldboss Engine, and I'm having different issues with it now: Followers using Dungeonbuddy stop following the tank and just stand there doing nothing for a long time before eventually deciding to move towards the tank.

I have confirmed that this is because of Goldboss Engine because I stopped using it for all Followers, and picked Dungeonbuddy instead from the HB drop-down menu, and they suddenly started to promptly follow the tank all the time without problems.

I can also confirm that I turned off ALL plugins in HB and disabled all WoW addons in every WoW instance. I was still experiencing this repetitive lag with all Followers, or late response and failure to keep following the tank.

Please find attached the full log from one of the followers. The part where the follower started running dungeons is towards the end. This issue is very serious, because running dungeons with Dungeonbuddy is the activity that takes the vast majority of my time with bots when I play manually. If the cause of this issue is not found and sorted out, I will seriously consider refunding my purchase, even though I really love the Mail Engine features and selling soulbound items feature of GoldBoss Engine.

I hope you can help me with this issue.

 

[Mike Hunt]

Have you made as i suggested: HBRelog stop profile task? I can assume you are not.

GoldBoss logged off as i can see, according settings you have in GUI.

Also you may want to see logs from HBRelog, and not HB itself int case it's connected to HBRelog.



For Inscription, make sure you have enabled WorkOrders in Garrison tab + Have mats

For profession, if you in some case mean it:

I do have stop HBRelog stop Profile.
Also it still shows version 1.1.4 even after i deleted the setting file from (\AppData\Roaming\HighVoltz\HBRelog\). I am using your version 1.2.2



Do you need to see HBRelogs log? i can upload 1, and is there any personal info i should remove before i do so?