[FREE] [Bot] Enyo - The ultimate raiding botbase!

[SpankAss]

so running this on frost dk and i am noticing it never does a obliterate....is there is way to prioritize that over frost strike or a better rotation for frost dk so this way when Killing machine procs it automatically goes to obliterate

 

[8bitmasochism]

This may be CR related but I'm not sure by looking at the logs myself.

I've been using Enyo in combination with TuanHA's CR betas. It works wonderfully for the most part but I keep running an issue when I attempt to do current level content. The bot works for trash but the second boss combat starts or I even target the boss, the bot stops and fails to do anything. Since it's mid combat I don't usually attempt to stop the bot from running but I do notice that the CR takes over again for a second or two before stopping again randomly. Attached is the log from my last attempt at making it work before I just took over.

I was able to use the same routine and settings successfully in ICC25, even on bosses. It appears HB only has this problem on current level content. I haven't been able to do any heroics, world bosses or raid content designed for level 90.

Thank you dudes!

EDIT: Oh and this was done after a completely fresh install not more than an hour or two prior. I tested the CR on the boss dummy in Orgrimmar before I went into LFR. No issues.

 

[SpankAss]

This thread is for the botbase enyo. Please report all errors and concerns to the rotation thread. With a log.

oh my bad i thought it was cause of enyo settings because before i installed enyo obliterate was working fine on the rotation so i figured maybe the enyo raid bot didnt use it and had its own rotation.

 

[Kmica]

oh my bad i thought it was cause of enyo settings because before i installed enyo obliterate was working fine on the rotation so i figured maybe the enyo raid bot didnt use it and had its own rotation.

Botbases dont do combat.
All combat/rotation is done by the CR.

 

[klepp0906]

Should add to the FAQ regarding "heeeelp my hotkeys aren't working" apart from hijacking, using wow full screen seems to stop them from working as well.

I wouldn't think that to be the case as hotkeys have worked for rtss and mumble but I've never had luck setting up a hotkey to do something as simple as pausing the bot.

Aaaanyways

 

[iwe]

Hey! I'm wondering if there is any friendly user here that would love to help me out on over Skype regarding this base, as i've got some questions etc.
Just send me and pm and i'll give u my skype.

 

[iwe]

What are some of the questions? We might be able to help you here

Sure, uhh, basiculy to use this botbase i need to get a routine also and use it with?
Basicly i move ingame meanwhile the bot controlls my skills etc, am i right then?

 

[iwe]

Yes you are correct.

Okay, cool. Can i use this botbase without a routine or is that impossible?
Sorry for the "noobish" question, but i recently came back to h-buddy & wow.

 

[flairdevil]

The botbase is currently causing some kind of conflict. If I use Enyo, it will not heal. If I use combat bot from HB, it works correctly. Since this is on the stupid ass store, we cant do anything about it ourselves, so we have to post here and hope someone eventually gets around to fixing it. Loving the new system! =-D

See this post for logs and more whining:

https://www.thebuddyforum.com/honorbuddy-forum/honorbuddy-support/186176-heal.html

 

[bp423]

The botbase is currently causing some kind of conflict. If I use Enyo, it will not heal. If I use combat bot from HB, it works correctly. Since this is on the stupid ass store, we cant do anything about it ourselves, so we have to post here and hope someone eventually gets around to fixing it. Loving the new system! =-D

See this post for logs and more whining:

https://www.thebuddyforum.com/honorbuddy-forum/honorbuddy-support/186176-heal.html

If you haven't already, make sure that you have hardlock enabled.

 

[moondogie]

Is there a way to have it target through the tank. Was just using this in an instance and I was having to select the mobs to fight and not just able to click on the tank in the group. Maybe I was doing something wrong though.

 

[moondogie]

That's your cr doing that not the bot base. The base only runs the cr. that's all it does

Thank you!

 

[SoulSector]

Been out of the botting scene for quite a while (last time I was here was when Tryael was first released). Have any bans been reported with Enyo? I recall a couple people reporting with LazyRaider but I'm unsure as it was so long ago.

Could someone just clear this up with me please? Thanks

 

[gunite69]

anyone have issues with trying to stream enyo thru buddystore?

 

[kravitz]

Just started using Enyo... mostly for testing. Is there a GUI for changing settings?

 

[sways284]

Why doesnt my CR attack in LFR Or premades!?!?! but works fine on dummies and mob trash?!?!

 

[zer0kewl]

Why doesnt my CR attack in LFR Or premades!?!?! but works fine on dummies and mob trash?!?!

Why are you asking about your combat routine? This is for Enyo raiding bot base. If you have a question about your CR then ask the maker of that cr...?

Or if you would post a log then may be you could get some help.

 

[pepeng]

OMG, I love Enyo.!
(my 1st post is for enyo... Lol)

 

[nomnomnom]

OMG, I love Enyo.!
(my 1st post is for enyo... Lol)

Glad you like Enyo .

Why doesnt my CR attack in LFR Or premades!?!?! but works fine on dummies and mob trash?!?!

Without a logfile I cannot help you. But it's most likely a issue with your routine, and not Enyo. Cannot be sure without a proper logfile.

Just started using Enyo... mostly for testing. Is there a GUI for changing settings?

Yes - Open bot config in Honorbuddy .

anyone have issues with trying to stream enyo thru buddystore?

Sure there must be SOMEONE out there with that issue. But I presume thats not really the answer you're looking for. Cannot help without a proper logfile.

Been out of the botting scene for quite a while (last time I was here was when Tryael was first released). Have any bans been reported with Enyo? I recall a couple people reporting with LazyRaider but I'm unsure as it was so long ago.

Could someone just clear this up with me please? Thanks

I'm confident that there are reports with Enyo in it, but I doubt it's Enyo which caused the ban. Its most likely the other botbases they used, or the routine being stupid. I think the ban-chance is pretty slim with Enyo and a proper routine.

The botbase is currently causing some kind of conflict. If I use Enyo, it will not heal. If I use combat bot from HB, it works correctly. Since this is on the stupid ass store, we cant do anything about it ourselves, so we have to post here and hope someone eventually gets around to fixing it. Loving the new system! =-D

See this post for logs and more whining:

https://www.thebuddyforum.com/honorbuddy-forum/honorbuddy-support/186176-heal.html

Report this to the routine author. Enyo is properly pulsing HealBehavior.

Sure, uhh, basiculy to use this botbase i need to get a routine also and use it with?
Basicly i move ingame meanwhile the bot controlls my skills etc, am i right then?

Yes - Enyo is the bot which allows a routine to do their combat functions while you continue to move around .

Okay, cool. Can i use this botbase without a routine or is that impossible?
Sorry for the "noobish" question, but i recently came back to h-buddy & wow.

Nope. Enyo is the botbase which lets the routine run as fast as possible. You need both.

Should add to the FAQ regarding "heeeelp my hotkeys aren't working" apart from hijacking, using wow full screen seems to stop them from working as well.
I wouldn't think that to be the case as hotkeys have worked for rtss and mumble but I've never had luck setting up a hotkey to do something as simple as pausing the bot.
Aaaanyways

HB doesn't work with WoW fullscreened right?

oh my bad i thought it was cause of enyo settings because before i installed enyo obliterate was working fine on the rotation so i figured maybe the enyo raid bot didnt use it and had its own rotation.

Enyo is only a botbase which allows a routine to perform their combat.

This may be CR related but I'm not sure by looking at the logs myself.

I've been using Enyo in combination with TuanHA's CR betas. It works wonderfully for the most part but I keep running an issue when I attempt to do current level content. The bot works for trash but the second boss combat starts or I even target the boss, the bot stops and fails to do anything. Since it's mid combat I don't usually attempt to stop the bot from running but I do notice that the CR takes over again for a second or two before stopping again randomly. Attached is the log from my last attempt at making it work before I just took over.

I was able to use the same routine and settings successfully in ICC25, even on bosses. It appears HB only has this problem on current level content. I haven't been able to do any heroics, world bosses or raid content designed for level 90.

Thank you dudes!

EDIT: Oh and this was done after a completely fresh install not more than an hour or two prior. I tested the CR on the boss dummy in Orgrimmar before I went into LFR. No issues.

Definitely a CR issue - Report to your CR creator.

[05:13:14.467 N] Fail in HealWeight
[05:13:23.894 D] System.Exception: Only part of a ReadProcessMemory or WriteProcessMemory request was completed, at addr: 00000000, Size: 36
at GreyMagic.ExternalProcessMemory.ReadByteBuffer(IntPtr addr, Void* buffer, Int32 count)
at GreyMagic.MemoryBase.Read[T](IntPtr addr)
at Styx.WoWInternals.LuaTable..ctor(IntPtr address)
at Styx.WoWInternals.LuaValue.get_Table()
at Styx.WoWInternals.LuaEvents.()
at Styx.Pulsator.Pulse(PulseFlags flags)
at Styx.CommonBot.TreeRoot.()
at Styx.CommonBot.TreeRoot.()
at Styx.CommonBot.TreeRoot.()

so running this on frost dk and i am noticing it never does a obliterate....is there is way to prioritize that over frost strike or a better rotation for frost dk so this way when Killing machine procs it automatically goes to obliterate

Thats a combat routine issue, not Enyo.

Hello Nomnomnom ,
im getting frustrated from the auto release spirit after death i have delete Honorbuddy and reinstall it im using this :
Botbase : Enyo
combat routine : kingwow 2 Mage (paid )
where is the problem and how to fix it .

That's not Enyo - Thats kingwow or honorbuddy. Enyo does not support DeathBehavior.

My Enyo does just nothing...

Post a logfile.

 

[gunite69]

Hi nomnomnom, I know you are looking for a logfile to help investigate the issue. Currently I have been asking Tony and CodenameG and they are also unsure about my issue. If you have time here is my thread about this matter:
https://www.thebuddyforum.com/honor...pport/186578-buddy-store-streaming-issue.html

I have explained my situation and the possible solutions that i tried. I just simply cannot stream and as this is happening before WoD its depressing ><.

Currently I am still using tyrael (lol....), since that is the only botbase that does not require streaming and i have the required files for it (SVN update)..

If possible could I use enyo by downloading it directly / using SVN? - i know this is only a short term method and will also have trouble for the combat routines that i paid for too.