[PAID] BGFarmer - An Advanced Battleground Bot Base

[camzy]

Been having Mounting issues on Demon Hunter when it goes to target a player in distance it tries to mount but will auto cancel mount and remount SEVERAL times before it decides what to do

 

[Millz]

Delaying BGFarmer 2 until tomorrow. Not happy with some behaviour which looks bot-like in domination BGs, so need to work on it a bit more.

 

[Rogtrainer]

Showing off the Botbase BG Farmer 2 battlefields. But I do not need. If I turn off ever Manual Alterac Valley and Isle of Conquest then these are the two other battlefields where specified in the Botbase off again.

And when will BG Farmer 2 released? I see all the time that it is absolutely not going well. Every 2nd normal person recognizes that this is a bot. Alone by the navigation.

Ps: I hope with BG Farmer 2 everything will be better.


And what about even noticed in Alterac Valley. If the players the boss in the base attacks, the character runs out remains with the boss standing but makes no attacks and runs away again and goes back to the boss and stops again without damage to make. This is also quite striking

i looking in the Ban-Forum Thread, and see here: This User is Banned with BGFarmer (Millz) https://www.thebuddyforum.com/honorbuddy-forum/ban-section-ban-reports/269818-banned-till-march-2017-a.html

I also always like to use BG Farmer and it was once a time as BG Farmer has really 100% working.

But unfortunately as the Botbase currently can not run to them. I have known too scared my account of losing.

I try every day from BG Farmer and let him for a short time when I run sit in front of the PC and but I keep seeing errors, error, error.

are fixed up all those error remains for me to go only by hand in BG's

 

[RubyWep]

The bot doesn't seem to be strafing or doing any combat movement and I have it enabled. I disabled the singular movement what else do I need to do to get this working?

edit: Also why does the bot not randomize its location while waiting for the BG to start. My bots are standing on top of each other.

 

[nfx21]

Bottich behaviour

Hi,

i notices the following behaving that can identify a bot in a few seconds:

1. Running back and forth for a while.
This happens nearly on every 10/15 Map

In most cases when respawning on a graveyard where you have to jump down.

In Twinkpeaks it happens between the Flagroom and the front door that small connector way between the two room.

2. Temple of Kotmogu the bot isnt moving during the start.

3. Some logical improvements could be done when doing a flag run. I saw that the bot turns when it gets attacked. Often it is a range dd and the bot runs back into the enemies. It should ignore him and continue.. however this is advanced logic and only true when there is support so you aint die from the rang dps.

 

[bot4cash]

Bot just runs on top of flag runners and does not engage had 2 teamamtes fighting a druid flag runner bot just mounted ran around the flag never getting in to combat.

I just saw the push for the new version is coming out asap will prolly fix the issue

 

[Millz]

A new public build has been pushed to the store, and is currently awaiting approval from the Bossland GmbH staff. This can take up to 3 business days.



[13/Sep/2016 - Alpha]
ANNOUNCEMENT: Please do not leave BGFarmer AFK until stable.
** BGFarmer v2 **
** Big thanks to the testers in the Discord channel for helping with this release - especially #th3g3ntl3man]. **
************************************************
- BGFarmer's navigation has been re-written to support Honorbuddy 3.
- Fully re-written battleground logic in all BGs.
- All logic now has much faster reaction times, and less idling.
- Fixed signing up for specific BGs.
- Fixed using the correct ground mount.
- New GUI interface (which supports 4k monitors).
****************** Known Bugs ******************
- Ashran is not optimal. It works, but needs improvements.
- IoC and SotA still aren't supported.
- Chat Replacement / Blackspot GUI controls aren't refreshing properly.
- Blackspots in navigation aren't working (HB3 issue).
- There may still be navigational issues, which are most likely related to HB3, not BGFarmer.
- Jumping has been temporarily disabled (cause of spam jumping in water).
************************************************

 

[RubyWep]

Bot just runs on top of flag runners and does not engage had 2 teamamtes fighting a druid flag runner bot just mounted ran around the flag never getting in to combat.

I just saw the push for the new version is coming out asap will prolly fix the issue

Yeah I'm having an issue where it doesn't dismount to go into combat it fill follow around on mount for a while before attacking and it looks really suspicious.

 

[RubyWep]

On temple of Kotmogu it just sits at the start and never does anything is this fixed in the update?

 

[Existenz88]

Im having trouble with the bot not doing any movement in combat, eventhough movement is enabled (using 3rd party CR which doesnt support movement) and out of combat works perfect. It seems like when its about to engage in combat it just stops.
Is there any configuration im missing, or is it bugged?

 

[hellrazor113]

It seems BGFarmer keeps excluding SOA/IOC while i want to exclude AV. Anyway to stop the bot changing my excludes?

 

[Millz]

Im having trouble with the bot not doing any movement in combat, eventhough movement is enabled (using 3rd party CR which doesnt support movement) and out of combat works perfect. It seems like when its about to engage in combat it just stops.
Is there any configuration im missing, or is it bugged?

I probably need to fix it - where are you seeing this happen?

It seems BGFarmer keeps excluding SOA/IOC while i want to exclude AV. Anyway to stop the bot changing my excludes?

SotA and IoC aren't supported yet.

 

[Existenz88]

I probably need to fix it - where are you seeing this happen?

Every BG. As soon as it finds a target, it dismounts and then just stands idle unless the targets come close enough (playing melee, Rogue).
I have ofcoursed enabled movement in the bot config. Yet it still does nothing as its about to enter combat.

EDIT: It seems that the 'keep within range of target' needs to be a minus value for a melee to keep close. Dont know if this is intended or not (default is 25). After having set it to a minus value (-20) it goes to the target now.

EDIT edit: Nope, doesn't work 100. Sometimes it will go to the target, sometimes it will just stay at the same spot not moving to the target.

Update: It seems that if range settings is set to 0 or minus it will go to the target IF youre in combat. However, if your're mounted and it finds a target, it will dismount and just stay there unless the target comes close enough to engage. Makes sense?

 

[Robby2x]

I have to use singular profile for combat or else the BG millz does not work properly....

In AV near storm pike grave yard when the bot runs it twitches and looks like an obvious broken bot, did not test further bc i cant stay to watch longer then 1 game...atm

Also, is it still suppose to say BGFarmer Millz or BGBuddy 2?... I still see the BGFarmer millz when i select yours, when i go to the store it says the last update was today, Sept 15, 2016

 

[bot4cash]

Every BG. As soon as it finds a target, it dismounts and then just stands idle unless the targets come close enough (playing melee, Rogue).
I have ofcoursed enabled movement in the bot config. Yet it still does nothing as its about to enter combat.

EDIT: It seems that the 'keep within range of target' needs to be a minus value for a melee to keep close. Dont know if this is intended or not (default is 25). After having set it to a minus value (-20) it goes to the target now.

EDIT edit: Nope, doesn't work 100. Sometimes it will go to the target, sometimes it will just stay at the same spot not moving to the target.

Update: It seems that if range settings is set to 0 or minus it will go to the target IF youre in combat. However, if your're mounted and it finds a target, it will dismount and just stay there unless the target comes close enough to engage. Makes sense?

Same thing on my end 100% also this impacts when defending flags it will watch ppl take the flag your defending looks really bad
As soon as the bot takes dmg it reacts great and moves to obj great but combat movement is wonky atm

love the profile and all your hard work

 

[Millz]

Every BG. As soon as it finds a target, it dismounts and then just stands idle unless the targets come close enough (playing melee, Rogue).
I have ofcoursed enabled movement in the bot config. Yet it still does nothing as its about to enter combat.

EDIT: It seems that the 'keep within range of target' needs to be a minus value for a melee to keep close. Dont know if this is intended or not (default is 25). After having set it to a minus value (-20) it goes to the target now.

EDIT edit: Nope, doesn't work 100. Sometimes it will go to the target, sometimes it will just stay at the same spot not moving to the target.

Update: It seems that if range settings is set to 0 or minus it will go to the target IF youre in combat. However, if your're mounted and it finds a target, it will dismount and just stay there unless the target comes close enough to engage. Makes sense?

Thanks - I've re-worked the logic for engaging with a target for the next release.

I have to use singular profile for combat or else the BG millz does not work properly....

In AV near storm pike grave yard when the bot runs it twitches and looks like an obvious broken bot, did not test further bc i cant stay to watch longer then 1 game...atm

Also, is it still suppose to say BGFarmer Millz or BGBuddy 2?... I still see the BGFarmer millz when i select yours, when i go to the store it says the last update was today, Sept 15, 2016

Have you got the log file where it was 'twitching'? Preferably with a timestamp of where it's happened please? I need to know what it's trying to do so I can force it to fixate easier.

It'll still be listed as "BGFarmer [Millz]" in the drop down for bot config.

 

[gienek123]

What is real status of this how to buy this when the bot not working ;p is this working whit gs and vitalic ?

 

[Swing]

Hey there Millz. I have watched the new updated bgfarmer and i noticed one thing what is kinda weird. In silvershard mines the bot just goes one place and basically only afks there? It does attack enemys if it sees them but otherwise it just stands there and idle. Doesn't follow carts or anything. Do you know about this problem?

 

[Millz]

Hey there Millz. I have watched the new updated bgfarmer and i noticed one thing what is kinda weird. In silvershard mines the bot just goes one place and basically only afks there? It does attack enemys if it sees them but otherwise it just stands there and idle. Doesn't follow carts or anything. Do you know about this problem?

Yeah know about that one. Think I've got it fixed now.

 

[Swing]

Okey nice Thanks for the hard work !