What's new
  • Visit Rebornbuddy
  • Visit Panda Profiles
  • Visit LLamamMagic
  • Visit Resources
  • Visit Downloads
  • Visit Portal

[BETA] ArchaeologyBuddy - An Archaeology Bot (with flying)

Status
Not open for further replies.
My Honorbuddy says: "An error occured while loading ArchaeologyBuddy"
HB Vers.: 2.0.0.3740

Please Help me
 
Last edited:
Digsite: Ruins of Eldre'thar
Symptom: My toon just keep use survey tool on the bridge while the artifact is actually on the ground (right under the bridge)
 
50% of eastern kingdoms sites the bot will get stuck, how ever don't expect much for at this stage as its for kalimdor.

Also still cant climb over black rock mountain.
 
Thanks for the time you spent in doing this, respect for this.

Have you tested the new release yourself? is the problem with max flying height solved?(that it bugs arround in the sky at max height).

Thank you very much!
 
Raphus, the bot is still landing on objects.

Western Zul'Kunda Digsite (Eastern Kingdoms), the bot landed on a wall between surveys, making it unable to continue since it could not generate a walk path.
 
50% of eastern kingdoms sites the bot will get stuck, how ever don't expect much for at this stage as its for kalimdor.

Also still cant climb over black rock mountain.

Actually, the only places in EK that mine got stuck were Twilight Grove, Duskwood and Blackrock Mountain. Everywhere else it worked just fine. I moved over to Kalimdor as it seems it was developed and works better there so I don't have to babysit it as much.
 
My problem persists, please send me suggestions

"An error occured while loading ArchaeologyBuddy"
HB Vers.: 2.0.0.3740
 
My problem persists, please send me suggestions

"An error occured while loading ArchaeologyBuddy"
HB Vers.: 2.0.0.3740

Try a fresh installation of HB and AB, and post a log as an attachment after you've run it.
 
The bot got some really big problems with waters.. mine is just going downwards until it hits bottom, then just stands there.

other than that. A really nice bot man ! thx alot for this ! unbelivible what you do !
 
Im honestly surprised (That with the number of mandatory fixes you are doing) that you have not had the bot autoupdate like your other excellent work! (In time I guess) Keep up the good work Raphus, and as always, you rock.
 
Noticing a few things. But first the fix for the mountain is excellent, I always got stuck there.

Whenever he tries to go from STV to somewhere in the north, he will go around close to the swamp of sorrows and get fatigued, die, and won't be able to get back there.

Also, noticing a water thing in STV as well, just kept going down (swimming that is, even if he hit bottom).
 
day off so i thought id babysit while watching a few film and it works great with 2 exception,
1 water seems to flummox it royaly it just keeps swimming down and ner surveys unless you give it a hand, then it drowns and you have to manually corpse run
2 the arena in stv is not working aat all it doesnt seem to be able to path around the stadium seating
otherwise fantastc already up to 200 and still going thanks
btw i can post a log if you like for the deaths but it has char names in so itll take me a while to edit them out if you want it
 
Watched it for about 3hrs.. some observations I made during this time:

Darkmist Digsite in Feralas - Stopped flying 175 yards from site seems to be confused because it has to climb up a cliff peak to get into the digsite. Moved manually to this dig site and started bot, it did first dig on ground then flew up onto roof, got stuck had to jump off roof manually.

Slitherblade Shore Digsite Desolace - Got stuck on roof after flying between digs, had already landed at site without issue.

Stopped flying on route from Fields of Blood fossil bank in southern barrens to Sanurty of Malorne Digsite, just stopped mid air 643 yards away from digsite, no errors. <Hotspot X="3860.485" Y="-1768.218" Z="359.0724" /> had to fly up the mountain manually.

Scored Plain Digsite, stuck on roof at <Hotspot X="4614.747" Y="-2972.238" Z="1079.357" />

Stopped flying on route to Consellas digsite in Felwood <Hotspot X="5052.722" Y="-1288.318" Z="1404.807" /> mountain to climb again.

Stopped flying on route to Lower Lakkari Tar Pits in Un'Goro Crater <Hotspot X="-6063.442" Y="-1989.261" Z="123.2942" /> doing jerky 360 spin again.

Lower Lakkari Tar Pit, lots of issues here, bot went out of dig zone several times and stopped mid air when flying between digs at this site.

Stopped flying on route to Ironwood digsite @ <Hotspot X="5315.112" Y="-1421.417" Z="1411.846" /> looks like another issue with mountain to climb.
 
Yeah, a bit sad it aint very afk-able yet.

I ran it today while I was in school (didn't have the updates from today) and it went perfectly fine for 6 hours - got stuck about 3 times all in all,where i had to remotely turn off HB and start it again.
 
Mine runs good. Only problem is that while it is surveying it sometimes lands on buildings, pillars, walls, rocks, etc....once it lands on them if the relic is close enough that the bot does not mount back up...he is stuck till you manually move him.
 
Latest version seems to be the best ever.. Though there's still a few flaws:

- Problem with surveying and landing on buildings, pillars, walls etc. If next destination is close, it won't mount back up and obviously can't generate a path.
- Minor stuck problems, if none of the buildin stuck moves works, it could possible try and go back 1 yard?
- Got major problems in Twilight Grove. Basically just hanging in the air, trying to enter the area..

Keep up the good work Raphus!

As it's been asked many times now, do you accept donations?
 
The bot sometimes freezes when surveying on a ledge due to pathing. Also gets stuck in many places. It may help to make the unstuck go up and around similar to the plugin. Twilight Grove is completely bugged, upon entering the bot will just freeze and hover in the same spot, you can't even manually unstuck it.
 
Gets stuck at twilights grove, have to do that site manually.
Falls in to water at Light's tower shield in EP, have to do that one manually too.
 
Status
Not open for further replies.
Back
Top