[PAID] Apexis Dailies & Bonus Objectives - Patch 6.2

[Rusty_Trombone]

Is there a problem when we try to use this profile with two accounts at the same time? Second account seem to do nothing. With same settings etc. This is the log with the exception in the end...

 

[chasemay]

Several of my toons now get stuck in a loop in the same area on this profile. They appear to be searching for the Fel-Corrupted Apexis Fragment while doing the quest Unseen Influence.

Log attached.

 

[Aion]

Is there a problem when we try to use this profile with two accounts at the same time? Second account seem to do nothing. With same settings etc. This is the log with the exception in the end...

Hello,
Either your HB installation seems corrupt, or the CR is throwing some incompatibilities.
Would you try to run it with Singular or other 3rd party CR and report after.
If this do not work, try with clean Honorbuddy install.

Several of my toons now get stuck in a loop in the same area on this profile. They appear to be searching for the Fel-Corrupted Apexis Fragment while doing the quest Unseen Influence.
Log attached.

Thanks, chasemay.

If Unseen Influence quest is not competed in the Apexis Daily tour, while performing the other objectives, it will move to Ruins of Kra'nak to finish off.

The area is rich with "Radiating Apexis Shard" Chest respawn spots and it is the most suitable for completing the objective.

Usually, it complete in less than 2 min in empty zone, up to 20min in high populated zone. Even if the path looks like a long loop, it covers quite a high perimeter.

 

[chuckd]

I just started this profile and when it when to the taxi I got the following error. I just paused it and selected the correct path.

[TaxiRide-v2034(info)] Targeting Flightmaster: Gargash the Diver Distance: 5.29325 to listing known TaxiNodes
[TaxiRide-v2034(info)] Taking a ride to: naari Refuge, Tanaan Jungle

Not sure if you have seen this of I didnt do something right or I am missing something.

 

[Aion]

I just started this profile and when it when to the taxi I got the following error. I just paused it and selected the correct path.

[TaxiRide-v2034(info)] Targeting Flightmaster: Gargash the Diver Distance: 5.29325 to listing known TaxiNodes
[TaxiRide-v2034(info)] Taking a ride to: naari Refuge, Tanaan Jungle

Not sure if you have seen this of I didnt do something right or I am missing something.

Hello, its nothing wrong on your end. The TaxiRide behavior is not always working as intended, so a mouseover the desired Flightpath on the map do "help" it up.

New Update Released today!: TaxiRide is removed!

 

[Zicoth]

Sooo, after update this message pop all the time: You need to manually tag a Silver Rare, or loot any treasure nearby to unlock the Unseen Influence Daily Quest, due to "Loose Soil" Treasure has already been looted.

Though i did opent this daily quest ages ago, using earlier verison of your profile.

 

[Aion]

Is there a problem when we try to use this profile with two accounts at the same time? Second account seem to do nothing. With same settings etc. This is the log with the exception in the end...

Sooo, after update this message pop all the time: You need to manually tag a Silver Rare, or loot any treasure nearby to unlock the Unseen Influence Daily Quest, due to "Loose Soil" Treasure has already been looted.

Though i did opent this daily quest ages ago, using earlier verison of your profile.

Thanks for the feedback, Zicoth.

Addressed the issue, it is on the Horde side only.
Luckily, this will not affect the Auto Loader functions, but will stop the profile, if user do not press continue within 90 seconds.

Pushing fix ASAP.

 

[pheelgood]

Yup, click continue and you move along nicely... BTW I LOVE this product.. I use the crap out of it, more than any other profile I've ever used.

 

[themarketguy]

I'll dig out the log if need be but did you make changes to the hotspot for jungle teeth? Just running around in the south of tanaan "Moving to hotspot" back and forth around a tree in the south. Definitely looks VERY sketchy, not to mention the inefficiency of gathering. I stopped it and did it myself.

EDIT: Decided it would be best to just post the log.

EDIT2: not to mention the tree branch that big people on mounts get stuck on:
<Blackspot X="3243.988" Y="-522.3549" Z="16.76571" Radius="3.318429" />

View attachment 84076 2015-08-22 12.39.txt

 

[Aion]

Yup, click continue and you move along nicely... BTW I LOVE this product.. I use the crap out of it, more than any other profile I've ever used.

Thanks for the warm words, pheelgood.

They motivate me to improve it further!

I'll dig out the log if need be but did you make changes to the hotspot for jungle teeth? Just running around in the south of tanaan "Moving to hotspot" back and forth around a tree in the south. Definitely looks VERY sketchy, not to mention the inefficiency of gathering. I stopped it and did it myself.

EDIT: Decided it would be best to just post the log.

EDIT2: not to mention the tree branch that big people on mounts get stuck on:
<Blackspot X="3243.988" Y="-522.3549" Z="16.76571" Radius="3.318429" />

View attachment 185436

Hello themarketguy,

I guess it is running on mount - This is known issue with Honorbuddy, happened when the bot is mounted and completing quest objective, collecting items, dropped by hostile mobs. The bot just dont dismount

While not mounted, the quest is completed in less than 5min usually.

As workaround, in tonight update I have disabled mounting, while doing this and similar quests (Like the one in Zeth'gor).

Thanks for the Blackspot, will update it.

New update is Approved on the Buddy Store:

 

[testorr]

has hbrelog compability been added? considering a pruchase of this product

 

[pheelgood]

has hbrelog compability been added? considering a pruchase of this product

Doesn't that require a plugin?

 

[testorr]

Doesn't that require a plugin?

afaik it only requires: "<CustomBehavior File="HBRelogSkip" />" at the end of the last profile. this forces hbrelog to skip the current task (waiting) to the next task.

might throw an error msg for ppl not using hbrelog - but since the error accurs when the profile is allready finished it shouldnt trouble anybody.

 

[Aion]

afaik it only requires: "<CustomBehavior File="HBRelogSkip" />" at the end of the last profile. this forces hbrelog to skip the current task (waiting) to the next task.

might throw an error msg for ppl not using hbrelog - but since the error accurs when the profile is allready finished it shouldnt trouble anybody.

Indeed this tag require 3rd party Quest Behavior, which 99% of the customers do not have.

I am testing on all-round solution for this instead.

 

[captainplanB]

Hey, love the behaviours.

One thing I've noticed is that with the Apexis bonus event, I've already completed the quest so when I load the auto loader, it stands/hearths to the Horde garrison and just waits for the guy to give a quest, even though he won't because as I said before, I've already completed it.

Is it possible to auto detect if the quest is completed and if so, not to do this behaviour?

The workaround I did for the moment is to just run each area individually.

 

[s5011502]

Hey
Thank you for the great profile. I has been running smoothly for me for a while now. This weekend I hit an issue with the bonus apexis quest. When I have already done the quest on a character, the autoloader will still move there the next day and just sit there. Is there any way to get it to skip this step? I have tried just loading the profiles for the assaults but then it doesn't move to the next one when its done, just farms the same one even after the bar is completed.

Cheers

 

[Aion]

Hey, love the behaviours.

One thing I've noticed is that with the Apexis bonus event, I've already completed the quest so when I load the auto loader, it stands/hearths to the Horde garrison and just waits for the guy to give a quest, even though he won't because as I said before, I've already completed it.

Is it possible to auto detect if the quest is completed and if so, not to do this behaviour?

The workaround I did for the moment is to just run each area individually.

Hello captainplanB,
If you mention the The Bonus Apexis weekend quest - It is coded to Pick it Up from the garrison only if we have not completed it, obviously. Out of ~20 runs on 10 toons this weekend (which means at least 40 reloads on AutoLoader) it never had similar issue faced, as the one described above. The travel to Garrison was performed only once per character for pick up and once for turn in.

Hey
Thank you for the great profile. I has been running smoothly for me for a while now. This weekend I hit an issue with the bonus apexis quest. When I have already done the quest on a character, the autoloader will still move there the next day and just sit there. Is there any way to get it to skip this step?

Hello s5011502,
Seems you describe the same issue experienced.

Could both of you share a logfile, so we could figure out, what could have triggered such behavior.

I have tried just loading the profiles for the assaults but then it doesn't move to the next one when its done, just farms the same one even after the bar is completed.

Cheers

The Bonus Objectives quests are ran in strict order every day - Harbor->Fel Forge->Ruins->Front->Zeth'gor->Temple, then switch to any "Side daily", before returning to the base.

When a certain bonus objective bar reach 100%, the bot needs from 1-2 seconds up to a few minutes to perform certain tasts before switch to next profile: Up to a minute to clear all its Interactable objects from its current POI. When that is ready, when bot is not in combat, not looting, not in vendor behavior, the HB Core will let the profile continue and switch over to the next profile in list.

 

[themarketguy]

Just came across a scenario that I'm not sure you can account for or not. Was attempting to turn in one of the first couple quests for the day to Draka but today my garrison campaign became unlocked so Draka had the assault on auchindoun garrison campaign quest. Bot kept trying to hand in the quest but kept opening the dialogue for the garrison campaign quest, eventually failing to turn in the quest and stopping the bot. I'm remote right now so it would be a pain in the butt to post a log, but wanted to put it out there that this situation can exist (unsure if expected and expected to just fail). If I remember I'll find the log later I'll post it.

 

[Aion]

Just came across a scenario that I'm not sure you can account for or not. Was attempting to turn in one of the first couple quests for the day to Draka but today my garrison campaign became unlocked so Draka had the assault on auchindoun garrison campaign quest. Bot kept trying to hand in the quest but kept opening the dialogue for the garrison campaign quest, eventually failing to turn in the quest and stopping the bot. I'm remote right now so it would be a pain in the butt to post a log, but wanted to put it out there that this situation can exist (unsure if expected and expected to just fail). If I remember I'll find the log later I'll post it.

I guess you were put the bot on pause and do some Turn In manually, this is expected to mess with the profile logic. If such happen, either restart the profile, if not worked, restart HB client and relaunch the profile. It will handle it on its own.

But generally, even if Draka offer some of the Garrison Campaign Quest chain starters, this does NOT affect the Daily Quests at all!

 

[themarketguy]

I guess you were put the bot on pause and do some Turn In manually, this is expected to mess with the profile logic. If such happen, either restart the profile, if not worked, restart HB client and relaunch the profile. It will handle it on its own.

But generally, even if Draka offer some of the Garrison Campaign Quest chain starters, this does NOT affect the Daily Quests at all!

Yeah, had no issue with starting after manual acceptance of quest just wasnt sure if it was unknown or could be accounted for, not a big deal.