What's new
By:
  • Visit Rebornbuddy
  • Visit Panda Profiles
  • Visit LLamamMagic
  • Visit Resources
  • Visit Downloads
  • Visit Portal

[A3 Inferno] Ultimate SkyHigh Farm

This is running ok. been running it for a few hours now. Archon wiz running Ultima magi extended v2

act 3 1 run xp.webp
 
holy smokes a couple replies haha.

OK if you're having issues with TrinityMoveTo...you either DON'T have trinity installed/enabled, or you are using a relogger which requires the use of the Relog profile (you also must edit this XML file to point to the profile you wish to run be it skyhigh, ultima magi, whatever).

You will want to set your relogger to RUN this relog.xml file, NOT the profile...the relog file loads the profile and by then, Trinity should initialize. Or so I'm told...I don't use a relogger personally so I'm not super familiar with it. I think you have to also disable Kickstart.

If you find yourself standing in town in the beginning doing nothing, you likely don't have BETA/Trinity 2.1/2.2. I am using DB BETA's new useTownPortal tag to handle the changes in 1.0.7. If you don't want to use beta, see some previous posts above. I've given a number of workarounds.

Kakaru--The reduced targeting should be correct for Towers...they are smaller areas so we don't want a huge range. I'll double check though and make sure it's behaving like I want it. I'm not sure of that ActorID off the top of my head (I may be good, but not that good yet...still working on that Yoda/rrrix status)

ok I think I tackled everything, gotta jump back on some real world work. Read the OP carefully if you're having issues. I, and many others, have gotten these to run for MANY hours. Maybe I need to open up a hotline...:P
 
Great job as always !
I just started using yar , as the latest DB crashes sometimes in town .

but the way you told to load a reloger is dead on .

and i haven't have any issues with your updated profiles with final or beta DB .

if you have time though (i know your real life is getting very busy.), maybe you can make a sub directory in your dropbox , to try and separate the versions pre and post patch .
 
ahh good stuff :) been a couple days since i've been on , been down with the flu ,now playing catch-up and cleanup
 
Magi said:
holy smokes a couple replies haha.

OK if you're having issues with TrinityMoveTo...you either DON'T have trinity installed/enabled, or you are using a relogger which requires the use of the Relog profile (you also must edit this XML file to point to the profile you wish to run be it skyhigh, ultima magi, whatever).

You will want to set your relogger to RUN this relog.xml file, NOT the profile...the relog file loads the profile and by then, Trinity should initialize. Or so I'm told...I don't use a relogger personally so I'm not super familiar with it. I think you have to also disable Kickstart.

If you find yourself standing in town in the beginning doing nothing, you likely don't have BETA/Trinity 2.1/2.2. I am using DB BETA's new useTownPortal tag to handle the changes in 1.0.7. If you don't want to use beta, see some previous posts above. I've given a number of workarounds.

Kakaru--The reduced targeting should be correct for Towers...they are smaller areas so we don't want a huge range. I'll double check though and make sure it's behaving like I want it. I'm not sure of that ActorID off the top of my head (I may be good, but not that good yet...still working on that Yoda/rrrix status)

ok I think I tackled everything, gotta jump back on some real world work. Read the OP carefully if you're having issues. I, and many others, have gotten these to run for MANY hours. Maybe I need to open up a hotline...:P
Click to expand...

Unfortunately I'm using the latest and greatest BETA with 2.2 Trinity AND Trinity Combat 1.1 only, nothing else. I tried the bot with Tinnkaizer's profile but I want yours soooooo bad I'm gonna cry if I don't get to use yours... Magi... :(
 
its working perfect for me on my barb! but how do i change level of MP? :) peace
 
You can change the MP level from Demonbuddy -> Settings, it's not profile related.
 
After running for two hours:

===== Misc Statistics =====
Total tracking time: 2h 1m 18s
Total deaths: 0 [0 per hour]
Total games (approx): 3 [1.48 per hour]
Total XP gained: 56.12 million [27.76 million per hour]
Total Gold gained: 1061.72 Thousand [525.15 Thousand per hour]

I'm running the Ultimate Magi Extended, specifically for loot. The exp per hour I still pretty decent.

Note: I'm running on MP 3 and I'm a monk.

Overall, I've noticed a HUGE improvement in mechanics since the profile update. I used to die anywhere from 1 to 4 times an hour. Since running this new updated profile, I haven't died once. A job VERY well done sir.

On a side note, I really hope to see some improvements from DB and Giles in running a Tempest Rush build. It currently doesn't work very well so I'm just using a traditional build.
 
Magi said:
gotcha...welp you should be able to just replace the entire FROM TOWN section with this instead:

Code: 
<!--  *********  -->
<!--  FROM TOWN  -->
<!--  (Resume) -->
<While condition="Me.IsInTown and ActorExistsAt(191492, 374, 417, 0, 25)">
<UseObject questId="1" x="374.0712" y="417.0049" z="0.6144867" actorId="191492" isPortal="True" destinationWorldId="119290" statusText="Portal to Checkpoint"/>
/>
</While>
<!--  (New Game) -->
<While condition="Me.IsInTown and (not ActorExistsAt(191492, 374, 417, 0, 100))">
<UseWaypoint questId="101758" stepId="1" actorId="6442" x="402.5403" y="414.342" z="1.5338" waypointNumber="10" statusText="WP to Core of Arreat"/>
</While>
Click to expand...

Thanks bro! I'll give it a shot when I'm back at home later.
 
Yo Magi , i saw on first page last update 18.02 , and requires db 178+ beta , it works with last version of db too ? 302 i think it is , i prefer ultima magi extended , becausei just start it , and it works great so far...i will encounter any problems if use normal db and not beta?
 
Last edited:
[Trinity]Your bot got stuck! Trying to unstuck (attempt #1 of 15 attempts) Act="A3" questId="101758" stepId="1" worldId="81934"
arreat crater 2 on the right closed area my bot stucks every time
 
Mr Tdat said:
After running for two hours:

===== Misc Statistics =====
Total tracking time: 2h 1m 18s
Total deaths: 0 [0 per hour]
Total games (approx): 3 [1.48 per hour]
Total XP gained: 56.12 million [27.76 million per hour]
Total Gold gained: 1061.72 Thousand [525.15 Thousand per hour]

I'm running the Ultimate Magi Extended, specifically for loot. The exp per hour I still pretty decent.

Note: I'm running on MP 3 and I'm a monk.

Overall, I've noticed a HUGE improvement in mechanics since the profile update. I used to die anywhere from 1 to 4 times an hour. Since running this new updated profile, I haven't died once. A job VERY well done sir.

On a side note, I really hope to see some improvements from DB and Giles in running a Tempest Rush build. It currently doesn't work very well so I'm just using a traditional build.
Click to expand...


Note to everyone: I was using Trinity 1.7.2.1 when I made this post. I tried using 1.7.2.2 and it's not as efficient when using this profile. I went from not dying at all to dying several times an hour, which lead to a lot less gold/exp an hour. I decided to switch back to the previous Trinity (1.7.2.1) and I haven't died since and my numbers are back up to where they were.
 
Borhot88 said:
Yo Magi , i saw on first page last update 18.02 , and requires db 178+ beta , it works with last version of db too ? 302 i think it is , i prefer ultima magi extended , becausei just start it , and it works great so far...i will encounter any problems if use normal db and not beta?
Click to expand...

You'll need DB beta 178. If you want to run the release version, you'll need to remove the usetownportal tag from the profile. Check back a page or 2 where this is discussed for some workarounds.

buddybud said:
[Trinity]Your bot got stuck! Trying to unstuck (attempt #1 of 15 attempts) Act="A3" questId="101758" stepId="1" worldId="81934"
arreat crater 2 on the right closed area my bot stucks every time
Click to expand...

Take a screenshot of where you're talking about. The dungeon is random and it's pretty much a single MoveTo that is used. A log would be good too. Thx

Mr Tdat said:
Note to everyone: I was using Trinity 1.7.2.1 when I made this post. I tried using 1.7.2.2 and it's not as efficient when using this profile. I went from not dying at all to dying several times an hour, which lead to a lot less gold/exp an hour. I decided to switch back to the previous Trinity (1.7.2.1) and I haven't died since and my numbers are back up to where they were.
Click to expand...

How long are you testing for? To be fair comparisons, I typically try to run at least 4-6 hours. I guess if you ran 2 hours without dying and then went to 1.7.2.2 and died like 10x in a span of an hour or 2...I could see that being justified. It's been awhile since I died either way, but whatever you find, please make sure to let rrrix know and perhaps if something specific you see different in the way your bot behaves, please report to him so he can improve. Thanks!
 
raoha version, wanders somewhere in keep depths 2 going back and forth, or is it trinity problem?
 
grinch12 said:
raoha version, wanders somewhere in keep depths 2 going back and forth, or is it trinity problem?
Click to expand...

Depends where the stuck happened. Check the DB status window where you got stuck...did it say anything about Exploring from Entrance/Moving to Exit? If so, could be trinity related. If it says something like 5/15 or 15/5 or similar, that would be a definite issue on my end.

You can get legitimately perma stuck there...it's just rare from my testing (1 of 115ish Keep 2 back-to-back runs I encountered a perma-stuck). You may have been unlucky and rolled a stuck. You can get a brief stuck from time to time which is normal, but usually Trinity unstucker will get you free in 1-3 attempts. I always run with Gold Inactivity timer set at 120 seconds in case you get that rare permastuck.

It gets a bit complex to explain but keep an eye on it. If you are getting stuck frequently, PM me.
 
kk, happened to me 2 consecutive times, will see if it happens again and check what it says on the screen.
 
Magi said:
You'll need DB beta 178. If you want to run the release version, you'll need to remove the usetownportal tag from the profile. Check back a page or 2 where this is discussed for some workarounds.


well im using normal db , for 7-8 hours and works flawless (ultima magi extended ) without removing nothing that u told me :)
Click to expand...
 
Borhot88 said:
Magi said:
You'll need DB beta 178. If you want to run the release version, you'll need to remove the usetownportal tag from the profile. Check back a page or 2 where this is discussed for some workarounds.


well im using normal db , for 7-8 hours and works flawless (ultima magi extended ) without removing nothing that u told me :)
Click to expand...

Is it using the Portal to Azmodan checkpoint when you start or simply taking the WP to the start of Core?
Click to expand...
 
You must log in or register to reply here.
Back
Top