It makes sense and I have actually thought about it but never actually got on to figuring that out. Im not 100% sure if the bot can swap quests for you but if you wanted to try as it is , try putting all the segmented 7 (i believe thats gardetto's release in the act 2 forums) into C:\profiles along with the other act1elite xmls and see what happens when it reaches the end.
Extract & Play DemonBuddy - v220 + DRelog & Giles Suite
- Thread starter Bazingaw
- Start date
Shinyknight
New Member
- Joined
- Dec 23, 2011
- Messages
- 158
- Reaction score
- 0
I'll have to give it a shot and see what happens, I suppose!
In the meantime, after editing that file, it started up and created the game just fine. Woot. Thank you kindly.
@Jaypwns: You can use greyhound quite easily, just extract all the segmented profiles in greyhound to C:\Profiles\ and make sure you name them act1elite1.xml, act1elite2.xml, and so on.
and you will have to open each of the xmls and look for this line:
<Continue profile="Greyhoundpart2.xml"/>
and re place it with
<nextProfile />
and you will have to open each of the xmls and look for this line:
<Continue profile="Greyhoundpart2.xml"/>
and re place it with
<nextProfile />
Yeah its already doing it, thanks but still no way to reload after an hour or so? hellbuddy was better for this, no need for stupid plugins.
@dreams: Could you clarify a little? Checked off you Extracted profiles to C:\Profiles\ so its C:\Profiles\act1elite1.xml etc? Did you run Drelog.exe as admin and make sure all needed fields were correct including starting profile as act1elite1? Did you double check quests? sorry hard to figure out where things are going wrong with a vague help me 
@jay: You can with Drelog actually just I have never used it and I'm not 100% sure on how to set that up safely yet and don't want to tell people how to and get something wrong. Will be checking up on it later today and hopefully will update the OP to explain if I figure it out properly. Oh and by the way if you decide to update to Rad's latest Antidote release, just make sure you select which version of the zone profile you want (Example Festering Wood A or Festering Wood B and rename only 1 to the right act1elite#.xml and put that in C:\Profiles)
@jay: You can with Drelog actually just I have never used it and I'm not 100% sure on how to set that up safely yet and don't want to tell people how to and get something wrong. Will be checking up on it later today and hopefully will update the OP to explain if I figure it out properly. Oh and by the way if you decide to update to Rad's latest Antidote release, just make sure you select which version of the zone profile you want (Example Festering Wood A or Festering Wood B and rename only 1 to the right act1elite#.xml and put that in C:\Profiles)
@dreams: Could you clarify a little? Checked off you Extracted profiles to C:\Profiles\ so its C:\Profiles\act1elite1.xml etc? Did you run Drelog.exe as admin and make sure all needed fields were correct including starting profile as act1elite1? Did you double check quests? sorry hard to figure out where things are going wrong with a vague help me
@jay: You can with Drelog actually just I have never used it and I'm not 100% sure on how to set that up safely yet and don't want to tell people how to and get something wrong. Will be checking up on it later today and hopefully will update the OP to explain if I figure it out properly.
ok got it to load profiles but its still loading bugholer at demonbuddy load will that cause problems.
@Jay: Ahh alright thats good to hear, I'll update the act1 setup for the latest rad profile. Never really got to it myself as by the time I saw fit to do it I realized I could do act 2.
@dreams: hopefully my PM sorted it, and for anyone else: If you are using giles combat plugin, it doesn't matter what routine is selected in Drelog. As soon as the bot starts up and giles combat plugin is loaded it takes over and loads the blank routine as long as everything was extracted properly.
@dreams: hopefully my PM sorted it, and for anyone else: If you are using giles combat plugin, it doesn't matter what routine is selected in Drelog. As soon as the bot starts up and giles combat plugin is loaded it takes over and loads the blank routine as long as everything was extracted properly.
@Jaypwns: Alright you should have the dropbox link still: I added a profiles-antidote.rar in there. Download and replace all the files in C:\Profiles with that and you should be good to go. (The rar has a folder in it so just make sure you extract the files in that folder and not the folder)
Hmm thats really odd first person ive met with this issue, i guess one last try is do a complete fresh install of the entire setup, redownload the DrelogReadToUse-act1 and Profiles-Antidote.rar and give it a shot, might just be if you didnt do a clean install after multiple changes some files remained and are causing issues.
edit: I know this is a silly question, but you're 100% sure the profiles are extracted to C:\Profiles\ so its C:\Profiles\act1elite1.xml, C:\Profiles\act1telite2.xml etc yeah? I know it can be a little messy since I zipped the profiles up inside a folder already
edit: I know this is a silly question, but you're 100% sure the profiles are extracted to C:\Profiles\ so its C:\Profiles\act1elite1.xml, C:\Profiles\act1telite2.xml etc yeah? I know it can be a little messy since I zipped the profiles up inside a folder already
Last edited: