Extract & Play DemonBuddy - v220 + DRelog & Giles Suite
- Thread starter Bazingaw
- Start date
not sure why but everytime I start it it load D3 just fine. Then it open DB and DB crash a few sec after. pretty much like it wasn't the good version of DB but I did a fresh DL of the 220 build....
DB crash and Drelog switch to "status" = Diablo3_login and then do nothing. no password or login attemp
Demonbuddy is at C:\Drelog\DemonbuddyBases\DB 220
DM start, then it say "attach to D3 with ping xxx then it crash
DB crash and Drelog switch to "status" = Diablo3_login and then do nothing. no password or login attemp
Demonbuddy is at C:\Drelog\DemonbuddyBases\DB 220
DM start, then it say "attach to D3 with ping xxx then it crash
Last edited:
22:38:44.051 N] ========== Grid segmentation resetting!!! ============
[22:38:48.303 N] Demonbuddy v1.0.948.220 started
[22:38:48.993 N] Logging in...
[22:38:52.131 N] Attached to Diablo III with pid: 5932
[22:38:53.331 D] Executable Path: C:\Drelog\Demonbuddys\Arnaud2\Demonbuddy_Arnaud2.exe
[22:38:53.331 D] OS Architecture: x86
[22:38:53.333 D] OS: Windows 7 Service Pack 1 32-bit
[22:38:53.335 D] OS Language: French (Canada)
[22:38:53.399 D] Reloading AssemblyLoader<Zeta.CommonBot.ICombat> - Initializing
that`s everything in the log...
/edit
I tryed to open D3 manually and then execute DB from C:\Drelog\Demonbuddys\Arnaud2\Demonbuddy_Arnaud2.exe it open, i can log in with key but there`s no pluging showing at all and no profile is auto loaded and kill/loot radius is empty.
When I open DB directly from C:\Drelog\DemonbuddyBases\DB220 demonbuddy.exe it open, have value in kill/loot radius but still doesn`t show any pluging or profile
[22:38:48.303 N] Demonbuddy v1.0.948.220 started
[22:38:48.993 N] Logging in...
[22:38:52.131 N] Attached to Diablo III with pid: 5932
[22:38:53.331 D] Executable Path: C:\Drelog\Demonbuddys\Arnaud2\Demonbuddy_Arnaud2.exe
[22:38:53.331 D] OS Architecture: x86
[22:38:53.333 D] OS: Windows 7 Service Pack 1 32-bit
[22:38:53.335 D] OS Language: French (Canada)
[22:38:53.399 D] Reloading AssemblyLoader<Zeta.CommonBot.ICombat> - Initializing
that`s everything in the log...
/edit
I tryed to open D3 manually and then execute DB from C:\Drelog\Demonbuddys\Arnaud2\Demonbuddy_Arnaud2.exe it open, i can log in with key but there`s no pluging showing at all and no profile is auto loaded and kill/loot radius is empty.
When I open DB directly from C:\Drelog\DemonbuddyBases\DB220 demonbuddy.exe it open, have value in kill/loot radius but still doesn`t show any pluging or profile
Last edited:
alright I had 2 separate folder for D3 when I was dual-boxing, I tryed to change the path of D3 to the other folder adn everything work fine... Wierd but hey it`s work so far! gonna post update
Post edited
my folder was "profile" missing the "s" might be the probleme.
/Edit2 yeah that was the probleme, running finr ATM will edit if the profile switch
/edit 3 everything work fine for the profile switcher. now let`s wait for a D3 crash to see how it goes
my folder was "profile" missing the "s" might be the probleme.
/Edit2 yeah that was the probleme, running finr ATM will edit if the profile switch
/edit 3 everything work fine for the profile switcher. now let`s wait for a D3 crash to see how it goes
Last edited:
Everything work fine, only thing missing is to update new gile`s stash and loot replacer. You have the new GilesWorldobjecthandler (which doesn`t have gold pickup amount anymore) it`s now implented in gile's stash and loot replacer new version:
v1.9.9.1
-- Gold piles in certain locations no longer cause your character to do the moonwalk on them over and over like Michael Jackson returned from the dead.
v1.9.9
-- A lot of further re-workings in item pickup handling code, should result in faster item pickups and less skipped items.
-- Better handling of gold pile pickups.
-- Minimum gold stack pile now an option within Stash Replacer config, default of 300 (World Object Handler 1.7+ no longer has this option).
not a big deal but the bot just move around to pick every single gold pile (running back for 25-100 gold isn't worth it)
v1.9.9.1
-- Gold piles in certain locations no longer cause your character to do the moonwalk on them over and over like Michael Jackson returned from the dead.
v1.9.9
-- A lot of further re-workings in item pickup handling code, should result in faster item pickups and less skipped items.
-- Better handling of gold pile pickups.
-- Minimum gold stack pile now an option within Stash Replacer config, default of 300 (World Object Handler 1.7+ no longer has this option).
not a big deal but the bot just move around to pick every single gold pile (running back for 25-100 gold isn't worth it)
Yeah I realized stash replacer was rather old I was actually waiting for Giles to come back from vacation and put out an update but it completely skipped my mind that the latest objecthandler sent gold handling to the stashreplacer. Will update it later today got seom stuff I need to handle first.
@axeman: For each diablo you want to run you have to create a Drelog profile
@axeman: For each diablo you want to run you have to create a Drelog profile
Hey any one know what can be wrong, when i start Dreloger all works fine, but when profile whant to cointinue and start another profile i have info that cant find path to profile, what the folder/paths of profiles structure should i use, i use A2 and A3 champ farm profiles.
You should have them extracted to C:\Profiles like the OP says (It should read something like C:\Profiles\act2elite1.xml)
Also if you are using different profile segments than the ones provided make sure you name them act1elite1.xml, act1elite2.xml OR act2elite1.xml, act2elite2.xml etc.
I'll add a modified set of Act 3 profiles in a little
Also if you are using different profile segments than the ones provided make sure you name them act1elite1.xml, act1elite2.xml OR act2elite1.xml, act2elite2.xml etc.
I'll add a modified set of Act 3 profiles in a little
any one know what might be wrong?Thanks for the reply.
Can you guide me a little with where i should add the -launcher within Drelog ? can it run 2 accounts at the same time? with 2 different profiles?
Redownload the ProfilesAct3.rar, screwed up editing it and didnt add the leave game condition on last prof
@gram: You do not add the "-launcher" line to Drelog, you add it to the shortcut of each Diablo3.exe you have.
for example you want to be able to run 2 diablo clients
You installed it at C:\Diablo 3\Diablo III.exe
You copy the entire Diablo 3 folder so its C:\Diablo 3 - Copy\Diablo III.exe
Go into the "Diablo 3 - Copy" folder > Right Click Diablo 3.exe > Create Shortcut > Right Click Shortcut to Diablo III.exe > Properties > Target Field > Change it so it looks like "C:\Diablo 3 - Copy\Diablo III.exe" -launcher
Then if you want to run 2 copies with Drelog, you add 2 Bot Profiles to Drelog after running it and just make sure one Bot Profile points to the original Diablo III.exe (C:\Diablo 3\Diablo III.exe) and the other Bot Profile points to the shortcut in C:\Diablo 3 - Copy\ (When browsing make sure you select the shortcut from the browse option)
@gram: You do not add the "-launcher" line to Drelog, you add it to the shortcut of each Diablo3.exe you have.
for example you want to be able to run 2 diablo clients
You installed it at C:\Diablo 3\Diablo III.exe
You copy the entire Diablo 3 folder so its C:\Diablo 3 - Copy\Diablo III.exe
Go into the "Diablo 3 - Copy" folder > Right Click Diablo 3.exe > Create Shortcut > Right Click Shortcut to Diablo III.exe > Properties > Target Field > Change it so it looks like "C:\Diablo 3 - Copy\Diablo III.exe" -launcher
Then if you want to run 2 copies with Drelog, you add 2 Bot Profiles to Drelog after running it and just make sure one Bot Profile points to the original Diablo III.exe (C:\Diablo 3\Diablo III.exe) and the other Bot Profile points to the shortcut in C:\Diablo 3 - Copy\ (When browsing make sure you select the shortcut from the browse option)
Last edited:
Heya!
First of all, thanks Bazingaw for taking the time explain how we can get this to work,
it did absolute wonders for me
Second, I have a question: How do I go about making DB not ask if I want to update?
I'm running 220 and, besides the odd crash, I'd rather wait a few days with updating untill stability is proven and all plugins have been updated.
Thirdly, if I were to decide to update DB, how would I go about it? Do I just replace every instance of the bot I find with the new version, do I do the same with plugins?
Feel free to enlighten me
Big thumbs up again,
Nab
First of all, thanks Bazingaw for taking the time explain how we can get this to work,
it did absolute wonders for me
Second, I have a question: How do I go about making DB not ask if I want to update?
I'm running 220 and, besides the odd crash, I'd rather wait a few days with updating untill stability is proven and all plugins have been updated.
Thirdly, if I were to decide to update DB, how would I go about it? Do I just replace every instance of the bot I find with the new version, do I do the same with plugins?
Feel free to enlighten me
Big thumbs up again,
Nab
First off.. Thanks so much! I have act 1 working perfectly with this relogger.
now.. I decided I wanted to try act 2.
I have 2 folders, one that is drelogact1 and another that is drelogact2
drelogact1 works perfect
drelogact2 doesnt.. when I click run.. it loads up d3, loads up db and then db just closes on its own. I have it set up exaclty like the act 1 equivilant.. but with c
rofiles of the act2elite1, 2, 3 etc instead of the act1elite1, 2, 3 etc..
Im not quite sure what im doing wrong, because it seems like I have it set up the same, with the correct profiles in the right folders.. etc
Any help?
now.. I decided I wanted to try act 2.
I have 2 folders, one that is drelogact1 and another that is drelogact2
drelogact1 works perfect
drelogact2 doesnt.. when I click run.. it loads up d3, loads up db and then db just closes on its own. I have it set up exaclty like the act 1 equivilant.. but with c
rofiles of the act2elite1, 2, 3 etc instead of the act1elite1, 2, 3 etc.. Im not quite sure what im doing wrong, because it seems like I have it set up the same, with the correct profiles in the right folders.. etc
Any help?