What's new
By:
  • Visit Rebornbuddy
  • Visit Panda Profiles
  • Visit LLamamMagic
  • Visit Resources
  • Visit Downloads
  • Visit Portal

CLU (Codified Likeness Utility)

Status
Not open for further replies.
I love this raiding CC. But it could be nice if you could make a Rogue Tab where we can disable the bot using Kick and Expose armor :)
 
Hi Lbniese, you can disable interrupts in the settings...just set it to manual.
 
wulf said:
Hi zeldrak, unfortunately I have not tested CLU's Shadow priest at low levels so I am not sure how he performs [I would test but realm shutdown here :)]. Having said that I plan to make the same DoT management improvements done on the warlocks to the shadow priest rotation of CLU and this will more than help at lower levels :D


Stay tuned....
Click to expand...
Oh, I haven't tried it on my low level priest yet, but I certainly can once I get home this afternoon. I only jumped to the conclusion I posted because most CCs are very, very mana intensive for shadow at low levels. With the one Pasterke did, all it really does (that I can see) is cast Mind Blast, Vampiric, PW: Shield, Mind Flay (sometimes MF twice depending on health pool), then PW: Death (which activates the Spirit Tap glyph to give back 3% mana over 3 seconds). It's very efficient and does a really good job at killing/mana conservation. I just notice that sometimes it doesn't end with PW: Death and therefore runs low on mana. I've noticed with CLU that it's very efficient and I've never seen it miss a spell, so I just felt that it would always end with PW: Death, keeping the glyph active and therefore less likely to run low on mana.

I'll check it out when I get home though and post up any suggestions.
 
can you make it cast the beacon for the holy paladin on the paladin when its PVPing if you are gonna do somthing about the pvp

and thanks :D
 
wulf said:
Hi Soeski, the first thing I changed was the heal targeting, it now waits until after you have finished casting rather than targeting like a mad man and basically throwing heals on targets that didn't need it. This results in two things, using less mana by not applying unnecessary heals and getting the right heal to the target at the right time.

For Druid I tried to get the lifeblooms on the tank more acurately and refreshing with nourishes now accounts for client lag. I priotised rejuves over regrowths and tuned wild growths with tranquility and tree of life during high raid damage.

For holy paladin I tried to get beacon applying correctly, it's not too bad now. It will sometimes get applied incorrectly but quickly corrects itself. Holy shocks are improved and now also make use of Daybreak buff not only to gain holy power before WoG but to gain holy power if there is no one to heal and Daybreak is about to expire. WoG has been tuned to heal with lower holy power in an emergency an to heal with full holy power when the targets health will benifet from the full heal and not just throwing it on them as it was higher priority. I noticed the average heal from WoG go from approx a 9k heal to 20k+ which is much better. Divine light is now prioritised above other heals when infusion of light procs and this works amazing.

A huge one was judgements of the pure uptime for holy paladin as it is now almost always 90-98% uptime, up from around 50%. And sometimes not at all! This is a huge increase in not only healing but mana regen as well.

All cleansing has been given more priority as it was almost killing me while trying to heal thru the poison or magic debbuffs.

Logging has been improved to facilitate problem solving....it's only going to get better as I fine tune with shit gear and good gear!


It will heal PvP but has not been fully tested.
Click to expand...
Wow, thanks for the elaborate answer! Makes me even more want to test the Resto Druid and my Disc Priest. Especially the latter is/was OOMing very fast in LFR; 2nd platform and I was OOM...
Gonna report back to you.
On a side note: Noticed all the classes and specs are now green; meaning; they ALL work?
 
i said i'd try it and i just did AND VERY FUCKING GOOD DUDE!
same Dps as Necrophilia frost Dw DK peak for both is 30K , @3M they are the same ranging the dps from 27-29K now i'll test unholy but i want to ask you first is it good?
 
Soeski said:
Wow, thanks for the elaborate answer! Makes me even more want to test the Resto Druid and my Disc Priest. Especially the latter is/was OOMing very fast in LFR; 2nd platform and I was OOM...
Gonna report back to you.
On a side note: Noticed all the classes and specs are now green; meaning; they ALL work?
Click to expand...
its not that it means they all work it means that when they were yellow people were reporting bugs and what not .. if there isn't a report about a class for a long time it goes green
 
Wulf, I tested healing last night (heroic Deadmines actually) with my disc Priest. Big mistake ;)
When I was teleported, the fight was already in progress. I started the bot after I entered, and... it did nothing. I selected a mob, still did nothing. I selected a player; still did nothing. By that time I'd almost let the tank die. So, I manually clicked PW:Shield on the tank. That woke up my toon! It started to heal.
After combat was over, the group members were between 60-80% health. Bot did not do anything about that. I had to manually heal them to 100%. Then the next combat fase. Bot does nothing. I had to select the tank again, cast PW:Shield or Greater Heal or some other healing spell and the bot woke up. Then it decided that the tank was healed, it could rest again and let the other members die. At that point, group members left. Sorry, my bad!
I can not attach a log now, but in all fairness, it did not say anything either. It didn't log anything because it was not doing anything; like it was functioning within normal parameters.

So, I quickly started Noobrage and all was fine again. (Sorry, I had to save my ass from being kicked :)).

Then I thought; does CLU 2.6.5 support Atonement spec? When CLU did heal (after manually started), it did not use Smite, Holy Fire etc., only Greater Heal and Heal, PoM etc.

So, really my question is: Does CLU support Atonement - Disc Priest? I got the impression that it doesn't (yet).
 
Last edited:
Hay wulf did somemore testing and it works on my pally , but not my warrior. When I try to start it on my warrior same old ding and a wall of red text.
 
Change Log
-------------

* 22/6/2012 [2.6.6] *Lots of changes*, added support for talents and glyph checks needed for Dispel Logic, increased reaction speed with LockSelector, support added for Rest Behaviour (needed for healing), even more tweaks to resto druid and Holy paladin.

Resto druid and Holy pali has new healing behaviour so it will heal even when out of combat...Holy priest, Disc Priest, Resto Shaman to be updated shortly. Will add beacon for pali with PvP shortly. Much more to do...I think the destro lock is pulling higher numbers with this update?! <need sleep>
 
Code: 
[10:43:27 AM:083] Activity: Initialization complete
[10:43:27 AM:083] Initialization complete.
[10:43:27 AM:083] Honorbuddy is up-to-date
[10:43:27 AM:085] Activity: Honorbuddy Startup Complete
[10:43:28 AM:531] Activity: Loading Profile...
[10:43:32 AM:435] Downloaded tilemap Azeroth
[10:43:32 AM:779] Changed tilemap to Azeroth, Tiled: True
[10:43:32 AM:834] Changing current profile to level 0 - 2147483647
[10:43:35 AM:013] Starting the bot!
[10:43:35 AM:025] Changing current profile to level 0 - 2147483647
[10:43:38 AM:401] Chose CLU (Codified Likeness Utility) 2.6.3 as your combat class!
[10:43:38 AM:408] [CLU] 2.6.3:  [BotChecker] Combat Bot Detected. *MOVEMENT DISABLED*
[10:43:38 AM:411] [CLU] 2.6.3:  [Racial Abilitie] Every Man for Himself 
[10:43:38 AM:497] Object reference not set to an instance of an object.
[10:43:38 AM:498] System.NullReferenceException: Object reference not set to an instance of an object.
   at CLU.CLU.get_PreCombat() in c:\Users\*************\Downloads\Honorbuddy_2.0.0.5883 (1)5\CustomClasses\CLU\CLU.cs:line 255
   at CLU.CLU.get_RestBehavior() in c:\Users\*************\Downloads\Honorbuddy_2.0.0.5883 (1)5\CustomClasses\CLU\CLU.cs:line 306
   at Styx.Bot.CustomBots.CombatBot.CreateCombatBehavior() in c:\Users\*************\Downloads\Honorbuddy_2.0.0.5883 (1)5\Bots\CombatBot.cs:line 125
   at Styx.Bot.CustomBots.CombatBot.get_Root() in c:\Users\*************\Downloads\Honorbuddy_2.0.0.5883 (1)5\Bots\CombatBot.cs:line 42
   at Styx.Logic.BehaviorTree.TreeRoot.Start()
   at Honorbuddy.MainWindow.Start()
[10:43:38 AM:499] Stop called!
[10:43:40 AM:409] Lua failed! Status: #SWb
why no work?
 
Sonny725 said:
Code: 
[10:43:27 AM:083] Activity: Initialization complete
[10:43:27 AM:083] Initialization complete.
[10:43:27 AM:083] Honorbuddy is up-to-date
[10:43:27 AM:085] Activity: Honorbuddy Startup Complete
[10:43:28 AM:531] Activity: Loading Profile...
[10:43:32 AM:435] Downloaded tilemap Azeroth
[10:43:32 AM:779] Changed tilemap to Azeroth, Tiled: True
[10:43:32 AM:834] Changing current profile to level 0 - 2147483647
[10:43:35 AM:013] Starting the bot!
[10:43:35 AM:025] Changing current profile to level 0 - 2147483647
[10:43:38 AM:401] Chose CLU (Codified Likeness Utility) 2.6.3 as your combat class!
[10:43:38 AM:408] [CLU] 2.6.3:  [BotChecker] Combat Bot Detected. *MOVEMENT DISABLED*
[10:43:38 AM:411] [CLU] 2.6.3:  [Racial Abilitie] Every Man for Himself 
[10:43:38 AM:497] Object reference not set to an instance of an object.
[10:43:38 AM:498] System.NullReferenceException: Object reference not set to an instance of an object.
   at CLU.CLU.get_PreCombat() in c:\Users\*************\Downloads\Honorbuddy_2.0.0.5883 (1)5\CustomClasses\CLU\CLU.cs:line 255
   at CLU.CLU.get_RestBehavior() in c:\Users\*************\Downloads\Honorbuddy_2.0.0.5883 (1)5\CustomClasses\CLU\CLU.cs:line 306
   at Styx.Bot.CustomBots.CombatBot.CreateCombatBehavior() in c:\Users\*************\Downloads\Honorbuddy_2.0.0.5883 (1)5\Bots\CombatBot.cs:line 125
   at Styx.Bot.CustomBots.CombatBot.get_Root() in c:\Users\*************\Downloads\Honorbuddy_2.0.0.5883 (1)5\Bots\CombatBot.cs:line 42
   at Styx.Logic.BehaviorTree.TreeRoot.Start()
   at Honorbuddy.MainWindow.Start()
[10:43:38 AM:499] Stop called!
[10:43:40 AM:409] Lua failed! Status: #SWb
why no work?
Click to expand...

Hi Sonny725, could you please update to the latest version via SVN or the first post, and also attach the full log. It makes it difficult to problem solve with such a small window of information. thx.
 
Wulfi if you have some time in the next days I would love to pm you an idea that has come to my mind.

greetz

Weischbier
 
Change Log
-------------

* 22/6/2012 [2.6.6] Updated Enhancement Shaman to make better use of LB and MW stacks (Now with T13 4pc support!) - thanks to sjussju!
 
Last edited:
weischbier said:
Wulfi if you have some time in the next days I would love to pm you an idea that has come to my mind.

greetz

Weischbier
Click to expand...

weischbier! I have all the time for you :) I am updating the Healing rotations for the next few days but would love to hear your ideas.
 
GraveWalker said:
Hay wulf did somemore testing and it works on my pally , but not my warrior. When I try to start it on my warrior same old ding and a wall of red text.
Click to expand...


Heya GraveWalker, CLU is checking for T13 Items. I am thinking your problem stems from not having a head, shoulder, leg, hand, chest piece.

Can you confirm ?

EDIT: *Just added * CLU will no longer error if you have no head, shoulder, leg, hand, chest piece when checking for Tier 2pc or 4 pc. If you could also update to latest SVN or from the Zip attached to the first post and recheck I would be grateful.
 
Last edited:
Status
Not open for further replies.
Back
Top