What's new
By:
  • Visit Rebornbuddy
  • Visit Panda Profiles
  • Visit LLamamMagic
  • Visit Resources
  • Visit Downloads
  • Visit Portal

[Azyul Project] Dungeon Farming, Gold Farming, Mount Farming, Transmog Farming, and more!

Hi,

I'm trying to use it but is not showing to me the Management System, what I have to do to work?
Sorry for my bad english.
I've already copied the Quest Behaviors settings.
I've tried with The Botanica script.

Thank you!
 
Could you tell me which (exact) profile you're using?

hi thanks for the support so far :)
i'm trying to use "Halls of Lightning" in heavy pull mode(also tried other modes) from your stv. but again. let me know your though on what is the best

any plan to ICC 25 weekly farm?

where is the donate icon/link? i count find...
 
Last edited:
EchoTiger said:
I haven't got around to it, sorry.
It'll most-likely be addressed today or tomorrow though.




Glad to see it's working out for you. ;3




Do you have the coordinates or a screenshot of this location?
Click to expand...

One of the 2 or 3 I ran into a few times

<GameObject Name="Large Timber" Entry="234195" X="4005.649" Y="4563.79" Z="135.9363" />

Update: Ran into this one again, doesn't appear that you can get to it without falling down from above. Its on the side of a cliff with no way up or down.
Would probably blacklist this one for good.
 
Last edited:
nogard said:
Running the Drake of the North Wind and when it gets to the Second boss for drop, it runs back and loots the baby drake below...this is just taking up time, i'm wondering if i can disable looting all together except for boss.

*EDIT* I just got my drop =) Thanks so much for this profile pack, going for Deathcharger now!!
Click to expand...
Grats!
I've seen the issue you're talking about before - although I figured that the "new looting method" would fix that.
I'll put it up on the tracker for it to be addressed.



Zincfling2 said:
Regarding the issue with the nagrand lumber level 3 profile, it's a general issue, it will always get stuck beneath a timber tree that sits on a superior plane. It never knows how to path to it and just stays stuck under it forever.
Click to expand...
Yeah, although these locations could be blacklisted so that the bot doesn't attempt to farm those specific lumbers.



Res03 said:
One of the 2 or 3 I ran into a few times

<GameObject Name="Large Timber" Entry="234195" X="4005.649" Y="4563.79" Z="135.9363" />

Update: Ran into this one again, doesn't appear that you can get to it without falling down from above. Its on the side of a cliff with no way up or down.
Would probably blacklist this one for good.
Click to expand...
Thanks! I'll add in a blacklist and send an update as soon as possible!
 
Godshiryu said:
Hi,

I'm trying to use it but is not showing to me the Management System, what I have to do to work?
Sorry for my bad english.
I've already copied the Quest Behaviors settings.
I've tried with The Botanica script.

Thank you!
Click to expand...
The AM profiles are a bit bugged since the QB update.
I'll be sending an update to roll them back soon.



BaliOne said:
hi thanks for the support so far :)
i'm trying to use "Halls of Lightning" in heavy pull mode(also tried other modes) from your stv. but again. let me know your though on what is the best

any plan to ICC 25 weekly farm?

where is the donate icon/link? i count find...
Click to expand...

Try this:

There's plans to make more profiles, but I've been too busy as of lately.
ICC25 has been requested several times, so it's on the tracker to be created - I don't have a ETA when though.

My PayPal for donating is: [email protected].
Or you should be able to find a link on http://azyul.com/

Thanks. :3
 
Ya np, thanks for an amazing profile. It's really nicely done and feels like a profile that someone would put the time into for a profit. So I donated! Thanks!
 
I just added your SVN repo to my profiles and ran into an error while loading up the Tol'vir profile in the suicide pulls folder. Honorbuddy throws an error:" Cannot load profile! Name cannot begin with the '<' character, hexadecimal value 0x3C, Line 74, position 1."

I was able to fix this error by placing '/>' at the end of line 73 in the profile.

<CustomBehavior File="RemoteCode" CodeUrl="https://raw.githubusercontent.com/EchoTiger/UNS-Raw/master/AzyulSnips/dynsell.xml"
<CustomBehavior File="RemoteCode" CodeUrl="https://raw.githubusercontent.com/EchoTiger/UNS-Raw/master/AzyulSnips/dynsell.xml"/>

Thanks a lot for your awesome profiles!
 
thelabel said:
I just added your SVN repo to my profiles and ran into an error while loading up the Tol'vir profile in the suicide pulls folder. Honorbuddy throws an error:" Cannot load profile! Name cannot begin with the '<' character, hexadecimal value 0x3C, Line 74, position 1."

I was able to fix this error by placing '/>' at the end of line 73 in the profile.

<CustomBehavior File="RemoteCode" CodeUrl="https://raw.githubusercontent.com/EchoTiger/UNS-Raw/master/AzyulSnips/dynsell.xml"
<CustomBehavior File="RemoteCode" CodeUrl="https://raw.githubusercontent.com/EchoTiger/UNS-Raw/master/AzyulSnips/dynsell.xml"/>

Thanks a lot for your awesome profiles!
Click to expand...
Hmm, that's really strange - and somewhat upsetting.
That line was automatically placed there by a mass-edit Regex.

If it's missing the end-tag, then chances are there's some other broken profiles out there as well.
Anywho - I'll send a patch for this up as soon as possible.

Thanks for the report!
 
since there is no death support could you do so Ressurect at spirit healers would work. becouse when i turn it on bot doesnt ressurect at spirit healers he goes and stands in front of a dungeon entrance
 
EchoTiger said:
Grats!
I've seen the issue you're talking about before - although I figured that the "new looting method" would fix that.
I'll put it up on the tracker for it to be addressed.




Yeah, although these locations could be blacklisted so that the bot doesn't attempt to farm those specific lumbers.




Thanks! I'll add in a blacklist and send an update as soon as possible!
Click to expand...

Unfortunately i have absolutely no idea how to do that! And in Nagrand that would mean blacklisting half of the large lumbers!
 
Hi EchoTiger,

Firstly, allow me to thank you for all your hard work and efforts so far. It's a really great compilation of profiles you have created.
Seeing that I now stroked your ego ;) Allow me to ask you something;

I am currently making use of the Timber (Level 1), and Timber (Level 2) profiles to gather wood for resources.
I have found that my character is getting stuck at some points where it cannot reach the timber, and although my HB client shows that it is blacklisting the nodes, it keeps waiting there and looping the blacklist procedure. I have tried manually moving my character away, but it then runs back and does the same.

I then left it for an hour whilst doing some garrison work, and restarting the Timber Level 2 profile, it gathered a few and when it reached that point again, same thing happened. I would like to try and help you resolve it so that the profile runs 100% AFK very smoothly, but I am not sure what information you would require from me, eg: Coordinates, etc..?

Feel free to PM me if you like.

Friendly greetings out of South Africa.
 
Hi there again,
I am trying to get the Judgement (Plate RC) set for my Ret Pally.
While using your profile, it runs the first instance (Hellfire Ramparts HC) for the Shoulder + Gloves, completes the instance.
Then it goes to Zangarmarsh for the (Legs + Belt), it went into Slave Pens, completed the instance looking for the belt.
Instead of continuing to farm for the rest, it swims out, flies up into the air and idles there while spamming exceptions into the log file.
Please see attached log file.
Please help.
 
Also, if I try to load the Normal Dungeons script for the Judgement set, then I get the errors as per attached log.
 
Hi.

I am trying to get the Judgement (Plate RC) set for my Ret Pally.
While using your profile, it runs the first instance (Hellfire Ramparts HC) for the Shoulder + Gloves, completes the instance.
Then it goes to Zangarmarsh for the (Legs + Belt), it went into Slave Pens HC, completed the instance looking for the belt.
Instead of continuing to farm for the rest, it swims out, flies up into the air and idles there while spamming exceptions into the log file.
Also, if I try to load the Normal Dungeon's script for the Judgement set, then I get the errors as per attached smaller log file.
Please see attached log file.
Please help.
 
Zincfling2 said:
Unfortunately i have absolutely no idea how to do that! And in Nagrand that would mean blacklisting half of the large lumbers!
Click to expand...
The only other option would be to write custom navigation for every Timber that's in an odd position, which would take some time to do.



mandriva said:
Hi EchoTiger,

Firstly, allow me to thank you for all your hard work and efforts so far. It's a really great compilation of profiles you have created.
Seeing that I now stroked your ego ;) Allow me to ask you something;

I am currently making use of the Timber (Level 1), and Timber (Level 2) profiles to gather wood for resources.
I have found that my character is getting stuck at some points where it cannot reach the timber, and although my HB client shows that it is blacklisting the nodes, it keeps waiting there and looping the blacklist procedure. I have tried manually moving my character away, but it then runs back and does the same.

I then left it for an hour whilst doing some garrison work, and restarting the Timber Level 2 profile, it gathered a few and when it reached that point again, same thing happened. I would like to try and help you resolve it so that the profile runs 100% AFK very smoothly, but I am not sure what information you would require from me, eg: Coordinates, etc..?

Feel free to PM me if you like.

Friendly greetings out of South Africa.
Click to expand...
I'd just need the coordinates so that I can send my bot there and blacklist the location.



mandriva said:
Hi there again,
I am trying to get the Judgement (Plate RC) set for my Ret Pally.
While using your profile, it runs the first instance (Hellfire Ramparts HC) for the Shoulder + Gloves, completes the instance.
Then it goes to Zangarmarsh for the (Legs + Belt), it went into Slave Pens, completed the instance looking for the belt.
Instead of continuing to farm for the rest, it swims out, flies up into the air and idles there while spamming exceptions into the log file.
Please see attached log file.
Please help.
Click to expand...
mandriva said:
Also, if I try to load the Normal Dungeons script for the Judgement set, then I get the errors as per attached log.
Click to expand...
These errors have actually been fixed, but weren't pushed to the SVN.
I'll be sending the update now.

Edit:
Updates sent.
 
Last edited:
mandriva said:
Hi.

I am trying to get the Judgement (Plate RC) set for my Ret Pally.
While using your profile, it runs the first instance (Hellfire Ramparts HC) for the Shoulder + Gloves, completes the instance.
Then it goes to Zangarmarsh for the (Legs + Belt), it went into Slave Pens HC, completed the instance looking for the belt.
Instead of continuing to farm for the rest, it swims out, flies up into the air and idles there while spamming exceptions into the log file.
Also, if I try to load the Normal Dungeon's script for the Judgement set, then I get the errors as per attached smaller log file.
Please see attached log file.
Please help.
Click to expand...
Please don't double post.

https://www.thebuddyforum.com/honor...ials-mounts-pets-post1934609.html#post1934609
 
EchoTiger said:
The only other option would be to write custom navigation for every Timber that's in an odd position, which would take some time to do.




I'd just need the coordinates so that I can send my bot there and blacklist the location.





These errors have actually been fixed, but weren't pushed to the SVN.
I'll be sending the update now.
Click to expand...

Thank you, please notify when the SVN update has been pushed so that I can do a checkout on my side again.
I will get you the coordinates for those timber that need to be blacklisted by tonight, then I will send them to you.
I will gladly help out with any testing for you, if you need a tester?
 
frames said:
since there is no death support could you do so Ressurect at spirit healers would work. becouse when i turn it on bot doesnt ressurect at spirit healers he goes and stands in front of a dungeon entrance
Click to expand...
Resurrecting at a spirit healer won't fix it because after it resurrects, the bot will want to coninute to the next coordinate it was running while inside the dungeon - which will cause it to run off the game in a random direction.
Also, if I could code the profile to resurrect at the spirit healer and continue from there, then I would be able to code death support.
The issue is the bot isn't giving me any control of its actions while dead.
 
You must log in or register to reply here.
Back
Top