What's new
  • Visit Rebornbuddy
  • Visit Panda Profiles
  • Visit LLamamMagic
  • Visit Resources
  • Visit Downloads
  • Visit Portal

[Wizard] [Class Specific] [Inferno ]Sarkoth Run Profile. Modified from Farix's

yeah,i have the same as you , not on cooldown in primary and secondary and the others in X Monster near you ; 6 and uses archon when player see a zombie out of cellar .. :(
 
Im getting a problem where the bot gets stuck near the cellar entrance and runs back and forth. How can i fix this?
 
i fixed and now used archon in cellar but when archon finish and player is trying to use portal to city the archon finish and portal to city stops and i need to wait 10more secs..how to fix that?
 
yeah,i have the same as you , not on cooldown in primary and secondary and the others in X Monster near you ; 6 and uses archon when player see a zombie out of cellar .. :(

Check the plugins. You might not have enabled the Icools plugin. :)
If thats not the case then can you enable DIagnostic logging from the last tab and give me the output. I will take a look at it.
 
Im getting a problem where the bot gets stuck near the cellar entrance and runs back and forth. How can i fix this?

Strange. Doesnt get stuck anymore with .146 version.
What all plugins are you using? Can you disable all plugins other than Icool's and check?
 
i fixed and now used archon in cellar but when archon finish and player is trying to use portal to city the archon finish and portal to city stops and i need to wait 10more secs..how to fix that?
this i have now the other i fixed thanks!!

how to fix that ?:P
 
i fixed and now used archon in cellar but when archon finish and player is trying to use portal to city the archon finish and portal to city stops and i need to wait 10more secs..how to fix that?

I am guessing that your dps is low or strangely coinciding with the archon end. You can try adding a wait timer for your use before the teleport routine starts. Edit the file in Wordpad and Find the line below:
Code:
 <UseTownPortal questId="1" />

Add a line above that:
Code:
<WaitTimer questId=?1? waitTime=?5000? />
This is in milliseconds. Above is for 5 seconds wait. Modify it accordingly. so that teleport starts after archon ends. It might save you few seconds. :)
 
Last edited:
I am guessing that your dps is low or strangely coinciding with the archon end. You can try adding a wait timer for your use before the teleport routine starts. Edit the file in Wordpad and Find the line below:
Code:
 <UseTownPortal questId="1" />

Add a line above that:
Code:
<WaitTimer questId=?1? waitTime=?5000? />
This is in milliseconds. Above is for 5 seconds wait. Modify it accordingly. so that teleport starts after archon ends. It might save you few seconds. :)

i am with wizard with 280% GF and i cant have more dps with this GF items, i have 25k dps i will try that you posted,thanks!
 
Last edited:
Strange. Doesnt get stuck anymore with .146 version.
What all plugins are you using? Can you disable all plugins other than Icool's and check?

I am using artemis plugin and now im triyn icool's and i am still getting stucked :(


[12:50:05.467 N] [Artemis Wizard Run Modded by Jaiki1.2] Cellar Found
[12:50:05.618 D] Generating path to Dank cellar portal - <2068.496, 2477.046, 27.10001>
[12:50:05.673 D] Successfully generated path from {X=1008,Y=829} to {X=990,Y=827} in 00:00:00.0174952 with 3(2) hops
[12:50:05.673 D] Client path generated.
[12:50:05.673 D] Generated path to <2068.496, 2477.046, 27.10001> (Dank cellar portal) with 2 hops.
[12:50:05.782 N] [Artemis Wizard Run Modded by Jaiki1.2] Cellar Found
[12:50:09.741 D] [Stuck Handler] We're stuck at <2067.01, 2520, 27.1>
[12:50:09.742 D] Navigator.Clear
[12:50:09.852 N] [Artemis Wizard Run Modded by Jaiki1.2] Cellar Found
[12:50:10.003 D] Generating path to Dank cellar portal - <2068.496, 2477.046, 27.10001>
[12:50:10.052 D] Successfully generated path from {X=1008,Y=829} to {X=990,Y=827} in 00:00:00.0167383 with 3(2) hops
[12:50:10.052 D] Client path generated.
[12:50:10.052 D] Generated path to <2068.496, 2477.046, 27.10001> (Dank cellar portal) with 2 hops.
[12:50:10.162 N] [Artemis Wizard Run Modded by Jaiki1.2] Cellar Found
[12:50:10.242 D] Navigation reached current destination. Within 42.96775
[12:50:10.242 D] Navigator.Clear
[12:50:10.358 N] [Artemis Wizard Run Modded by Jaiki1.2] Cellar Found
[12:50:10.492 D] Generating path to Dank cellar portal - <2068.496, 2477.046, 27.10001>
[12:50:10.547 D] Successfully generated path from {X=1008,Y=826} to {X=990,Y=827} in 00:00:00.0172106 with 2(2) hops
[12:50:10.547 D] Client path generated.
[12:50:10.547 D] Generated path to <2068.496, 2477.046, 27.10001> (Dank cellar portal) with 2 hops.
[12:50:10.656 N] [Artemis Wizard Run Modded by Jaiki1.2] Cellar Found
 
A lot of time my wizard is not using magic weapon when is in cellar
 
The log above shows artemis plugin. Can you disable it and use the Icool's and test?
 
Tips that have worked for me:

- I used to get hit once which would cause me to go into attack mode. If you go into Icools plugin and look for the section that talks about enabling killing outside of the cellar, change the "0.80" values to something lower, I have mine set at .40 so I can take 2-3 hits before it starts attacking.
- My dps is low (11k with force weapon lol), so by setting the kill radius to 50 over 30 or 40, it will pop archon in the cellar and attack him and his mobs right at the doorway, rather than moving in a few feet and giving them time to spread out.

Edit: I don't know for sure whether this actually made a difference, but I resized my window from full screen to about 1/3 of the size and the game seems to be running smoother. I have a shitty graphics card for this game so you may want to give this a shot and see if it helps you.
 
Last edited:
Why does my guys sometimes wander south after I die and hit a new checkpoint by the Cellar that is actually for the quest?
 
Tweaking it a bit. Give me some time. I will upload a modified version so that it uses all skills and buffs. :)
 
idk now why i have this error when i load de profile

[22:45:52.451 N] Failed to load profile: Invalid character in the given encoding. Line 39, position 22.
[22:45:52.451 D] System.Xml.XmlException: Invalid character in the given encoding. Line 39, position 22.
at System.Xml.XmlTextReaderImpl.Throw(Exception e)
at System.Xml.XmlTextReaderImpl.Throw(String res, String arg)
at System.Xml.XmlTextReaderImpl.InvalidCharRecovery(Int32& bytesCount, Int32& charsCount)
at System.Xml.XmlTextReaderImpl.GetChars(Int32 maxCharsCount)
at System.Xml.XmlTextReaderImpl.ReadData()
at System.Xml.XmlTextReaderImpl.EatWhitespaces(StringBuilder sb)
at System.Xml.XmlTextReaderImpl.ParseAttributes()
at System.Xml.XmlTextReaderImpl.ParseElement()
at System.Xml.XmlTextReaderImpl.ParseElementContent()
at System.Xml.XmlTextReaderImpl.Read()
at System.Xml.Linq.XContainer.ReadContentFrom(XmlReader r, LoadOptions o)
at System.Xml.Linq.XElement.ReadElementFrom(XmlReader r, LoadOptions o)
at System.Xml.Linq.XElement.Load(XmlReader reader, LoadOptions options)
at System.Xml.Linq.XElement.Load(String uri, LoadOptions options)
at Zeta.CommonBot.Profile.Profile.Load(String path)
at Zeta.CommonBot.ProfileManager.Load(String profilePath)


this is bcuz the line of the wait time is added but idk why now i have a error ..any idea?
 
Having this issue over and over again, not able to AFK. Any fix for that?
 

Attachments

  • strangething.webp
    strangething.webp
    178.8 KB · Views: 83
Back
Top